RR4-1202S10A1 RSG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. 2) (1.5mm from case 10sec Max.) 3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified. 4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. DC/DC-Converter RR4-S10/D10 10.0W 2:1 Regulated Single & Dual Output

  • 24 Pin DIL Package
  • Wide 2:1 Input Range
  • 1500VDC Isolation
  • High Power Density
  • Continuous Short Circuit Protection
  • Over Voltage Protection
  • Over Current Protection
  • Efficiency up to 90%
  • Operating Temperature Range -40° ~ +85°C
  • Metal Case
  • Soft Start OUTPUT SPECIFICATION Voltage accuracy: ±1% Line regulation: Single &Dual ±0.5% max. LOAD REGULATION: from 0% to 100% Load: ±0.5 - 1% max. Output 3.3V Model: ±1.0% Cross Regulation (Dual Output): ± 5% Over Voltage Protection (Zener diode clamp): Zener Diode Clamp Over Current Protection: 150%of Fl, typ.. Short Circuit Protection : Indefinite (Automatic Recovery) Ripple noise (20Mhz bandwidth): 75mV pk-pk Temperature coefficient: ±0.02%/°C Capacitor load: See table Transient Recovery Time: 200us,typ. Transient Response: (Deviation) ±3% max. INPUT SPECIFICATIONS Voltage Range: See table Start up Time: 20ms,typ. Max. Input Current: See table No-Load/Full-Load Input Current: See table Input Filter: PI Type Input Reflected Ripple Current : 20mA pk-pk typ. GENERAL SPECIFICATIONS Efficiency: See table typ. I/O Isolation Voltage Metal Case: 1000VDC I/O Isolation Voltage (3sec): 1500VDC I/O Isolation Capacitance: 1000pF typ. I/O Isolation Resistance: 1000M Ohm Switching Frequency: 330kHz, typ. Humidity: 95% rel H Reliability Calculated MTBF : > 1.00MHrs (MIL-HDBK-217 f) Safety Standard: (designed to meet): IEC 60950-1 ENVIRONMENTAL SPECIFICATION Operating Temperature range: -40°C ~+85°C (see Derating Curve) Maximum Case Temperature: 100°C Storage Temperature : -40°C ~+125°C Cooling : Nature Convection PHYSICAL SPECIFICATIONS: Case Material: Nickel-coated Copper PIN Material: 0.5mm Brass Solder coated Potting Material: Epoxy (UL94V-0 rated) Weight Case-DIP: 17.0g Dimmension DIP: 1.25“ x 0.8“ x 0.4“ ABSOLUTE MAXIMUM RATINGS (1) Input Surge Voltage (100ms)/ 12V Models: 25VDC max. 24V Models: 50VDC max. 48V Models: 100VDC max. Soldering Temperature: 260°C max. EMC SPECIFICATIONS (2) Radiated-/Conducted Emissions: EN55022 Class A see EMI Filter ESD: IEC 61000-4-2 Perf.Criteria A RS: IEC 61000-4-3 Perf.Criteria A EFT: IEC 61000-4-4 Perf.Criteria A SURGE: IEC 61000-4-5 Perf.Criteria A CS: IEC 61000-4-6 Perf.Criteria A PFMF IEC 61000-4-8 Perf.Criteria A DC/DC-Converter 10.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 1 (4) STAND Juni 2016 Rev 01

VD - 10W 2:1 Regulated Single & Dual output 1. Operation between no-load and 10% load conditions will not damage the module, but it may not meet all specificationslisted. 2. One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within±5%. 3. Measured with 20MHz bandwidth and 1.0uF ceramic capacitor. 4. Tested by minimal Vin and constant resistive load. 5. Tested by normal Vin and 25% load step change ( 75%-50%-25% of Io ). 6. Measured Input reflected ripple current with a simulated source inductance of12uH. 7. Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 8. Input filter components (C1, L) are used to help meet conducted emissions requirement for themodule. These components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated noise. 9. An external filter capacitor is required if the module has to meet EN61000-4-5. The filter capacitor RSG suggest: Nippon - chemi - con KY series, 220uF/100V. +Vout +Vin L DC/DC Converter Load -Vin -Vout MODEL SELECTION GUIDE MODEL NUMBER INPUT Voltage Range (RR4c) INPUT Current OUTPUT Voltage (RR4c OUTPUT Current EFFICIENCY @FL(%) Capacitor Load(uF) No-Load (mA) Full Load (mA) Min. load (mA) Full load (mA) RR4-1202S10A1 9-18 10 791 2.5 0 3000 81 2200 RR4-1203S10A1 9-18 10 1006 3.3 0 3000 84 2200 RR4-1205S10A1 9-18 10 992 5 0 2000 86 2200 RR4-1212S10A1 9-18 10 980 12 0 833 87 820 RR4-1215S10A1 9-18 10 958 15 0 667 89 470 RR4-1212D10A1 9-18 10 980 12 0 416 87 220 RR4-1215D10A1 9-18 10 969 15 0 333 88 150 RR4-2402S10A1 18-36 10 381 2.5 0 3000 84 2200 RR4-2403S10A1 18-36 10 497 3.3 0 3000 85 2200 RR4-2405S10A1 18-36 10 479 5 0 2000 89 2200 RR4-2412S10A1 18-36 10 485 12 0 833 88 820 RR4-2415S10A1 18-36 10 485 15 0 667 88 470 RR4-2412D10A1 18-36 10 485 12 0 416 88 220 RR4-2415D10A1 18-36 10 474 15 0 333 90 150 RR4-4802S10A1 36-75 10 191 2.5 0 3000 84 2200 RR4-4803S10A1 36-75 10 249 3.3 0 3000 85 2200 RR4-4805S10A1 36-75 10 242 5 0 2000 88 2200 RR4-4812S10A1 36-75 10 245 12 0 833 87 820 RR4-4815S10A1 36-75 10 242 15 0 667 88 470 RR4-4812D10A1 36-75 10 245 12 0 416 87 220 RR4-4815D10A1 36-75 10 245 15 0 333 87 150 C1 L RR4-12XXXXX 100uF, 100V 12uH RR4-24XXXXX 100uF, 100V 12uH RR4-48XXXXX 100uF, 100V 12uH PART NUMBER STRUCTURE VD - 24 12 Series Name Watt Input Voltage Range 12 - 9 ~ 18 V 24 - 18 ~ 36 V Output Type 48 - 36 ~ 75 V S - Single output D - Dual Output Nominal Output Voltage 2R5 - 2.5V 3R3 - 3.3V 5 - 5V 12 - 12V 15 - 15V S Derating Curve 100% 75% 50% S.O.A. 25% -40 -20 0 20 40 60 80 85 100 120 AMBIENT TEMPERATURE(° OUTPUTPOWER DC/DC-Converter RR4-S10/D10 6.0W Regulated Single & Dual Output DC/DC-Converter 10.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 2 (4) STAND Juni 2016 Rev 01 N O T E RR4 - XX XX S/D XX Power (W) Input Type A X Code internal Isolation (kVDC)

6.0W Regulated Single & Dual Output DC/DC-Converter 10.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 3 (4) STAND Juni 2016 Rev 01 VD - 10W 2:1 Regulated Single & Dual output EFFICIENCY VS OUTPUT C URRENT Nominal

85 Lo Line

0% 20% 40% 60% Load 80% 100% 120% EFFICIENCY VS OUTPUT C URRENT Nominal Lo Line

80 Hi Line

0% 20% 40% 60% Load 80% 100% 120% EFFICIENCY VS OUTPUT C URRENT Hi Line

80 Nominal

0% 20% 40% 60% Load 80% 100% 120% TEST CONFIGURATIONS Input Reflected Ripple Current Test Step Input reflected ripple current is measured through a source inductor Lin(12uH) and a source capacitor Cin(47uF, ESR<1.0Ù at 100KHz) at nominal input and full load. Output Ripple & Noise Measurement Test Use a capacitor Cout(1.0uF) measurement. The Scope measurement bandwidth is 0-20MHz. Resistive Load

12 Models 24 Models

48 Models

The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : sales@motien.com.tw +Vout +VinLin Current Probe Cin DC/DC Converter Load -Vin -Vout Copper Strip +Vout Single DC/DC Converter 1uF Cout Scope -Vout Efficiency(%) Efficiency(%) Efficiency(%) TEST CONFIGURATIONS

6.0W Regulated Single & Dual Output DC/DC-Converter 10.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 4 (4) STAND Juni 2016 Rev 01 VD - 10W 2:1 Regulated Single & Dual output MECHANICAL SPECIFICATIONS 31.75 (1.25) 22.86 (0.9) DC-DC CONVERTER RR4-XXXXXX RSG DIA 0.50 (0.02) 2 3 9 11 20.32 (0.8) Bottom View 15.24 (0.60) xxxx 23 22 16 14 Printed Face Built-in stand-offs help air convection 2.54 (0.10) 10.16 (0.40)

24 Pin DIL Package

3.00 (0.12) Notes: All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) PIN CONNECTIONS PIN NUMBER SINGLE DUAL

2 V Input V Input

3 V Input V Input

9 N.P. Common 11 N.C. V Output 14 +V Output +V Output

16 V Output Common

MOTIEN ISO 9001 . ISO 14001 . IECQ QC080000 No. 9, Keji 2nd Rd., Tainan Technology Industrial Park, Tainan City 70955, Taiwan Te l: 886- 6-384 2366 (Rep.) Fax: 886- 6-384 2399 DRAWIN APPROVED: Last Update : Apr.30.2013 MECHANICAL SPECIFICATIONS The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28