RPT7050GP RAKON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

PLUTO+2™ LOW G-SENSITIVITY TCXO/TC-VCXO Issue: A, 02 Aug 2022 Specifications are subject to change without notice Copyright © 2022, Rakon Limited. All rights reserved Page 1 of 2 sales@rakon.com RPT7050GP The RPT7050GP is one of our most advanced ≤0.2 ppb/g g-sensitivity Ultra Stable TCXOs (US-TCXOs) in a small low profile size of 7.0 x 5.0 x 1.5 mm. Frequencies are available from 10 to 52 MHz. This TCXO/TC-VCXO features Rakon proprietary technologies: Pluto+2TM ASIC, blank mounting and assembly. These advanced solutions guarantee the ±0.2 ppm frequency stability (FvT) over extended operating temperatures -55 to 105°C – the best Fvt performance TCXO with the widest operating temperature range. The US-TCXO is engineered for applications that withstand high vibration levels and harsh temperatures, such as defence, positioning and navigation, precision GNSS, avionics, telecommunications and Real-Time Kinematic (RTK). Standard Specifications Parameter Min. Typ. Max. Unit Test Condition / Description Nominal frequency (Fn) 10 52 MHz Frequency calibration ±1 ppm At 25°C, ±2°C, at time of shipment reference to the nominal frequency Reflow shift ±1 ppm After 1 hour recovery at 25°C Frequency stability over temperature ±0.2 – 0.5 ppm Reference to (FMAX + FMIN)/2 Operating temperature range -55 105 °C Operating temperature range over which temperature stability is measured Slope over temperature (ΔF/ΔT) 20 100 ppb/°C Temperature ramp 1°C/minute Supply voltage stability ±25 ±50 ppb ±5% variation Load sensitivity ±25 ±50 ppb ±5% variation Long term stability 1 year 10 years ±2 ±5 ppm ≤26MHz / >26MHz Acceleration sensitivity 0.2 0.5 ppb/g Gamma vector over operating temperature range Supply voltage (VCC) 3.3 V ±5% Supply current 5 11 mA The current value depends on Fn Output voltage – DC coupled C/Sine Load resistance Load capacitance 0.8 1.1 V kΩ pF Peak to peak voltage Output voltage (HCMOS) Voltage level low (VOL) Voltage level high (VOH) Rise and fall time Duty cycle Load 0.9 0.1 Vs Vs ns pF Measured with Vcc = 3.3V Measured at 50% level Control voltage (Vc) range 0.5 2.5 V Frequency tuning ≤26MHz >26MHz ±7 ppm Slope +7 ppm/V Input resistance 100 kΩ Modulation bandwidth 1 Hz Features Applications 7.0 x 5.0 x 1.5 mm  Low g-sensitivity typically ≤0.2 ppb/g  Pluto+2TM ASIC  Custom SC-cut high-Q crystal  ±0.2 ppm frequency stability over -55 to 105°C  Fast start-up 5 ns (HCMOS)  Customised design available on request  Defence  Positioning and navigation  Precision GNSS  Real-Time Kinematic (RTK)  Avionics  Communications

PLUTO+2™ LOW G-SENSITIVITY TCXO/TC-VCXO Issue: A, 02 Aug 2022 Specifications are subject to change without notice Copyright © 2022, Rakon Limited. All rights reserved Page 2 of 2 sales@rakon.com Environmental Specifications Parameter Description Vibration JESD22-B103 (section 4.2.2)/MIL-STD-202, M204, 20g, 10 to 2000Hz Mechanical shock JESD22-B104 (service condition B), 5 shocks in 6 axes (30 shocks total),1500g peak value, 0.5ms duration, half-sine waveform SSB Phase Noise (Typical value at 25°C)

10 MHz RPT7050GP Phase Nose

SSB Phase Noise (dBc/Hz) Frequency (Hz) Model Outline and Recommended Pad Layout Pin Connections 1* Do Not Connect / Vc (Control Voltage)

2 GND

3 RF Out

4 Supply Voltage (Vcc)

  • The connection depends on the specification NOTE: The area between the pads is a restricted area, no tracks or ground plane is allowed on any layer. Dimensions are in millimetres.