RPT7050D RAKON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Pluto+™ Low Acceleration Sensitivity TCXO/TCVCXO Issue: B, 23 March 2022 Specifications are subject to change without notice Copyright © 2014 to 2022, Rakon Limited. All rights reserved Page 1 of 2 Contact Us RPT7050D The RPT7050D features Rakon's proprietary Pluto+™ ASIC and a patented dual crystal resonator design, delivering exceptional frequency stability across a wide temperature range. With an acceleration sensitivity better than 0.2 ppb/ g, this low g-sensitivity TCXO is engineered for operation in harsh environments, maintaining performance in extended temperatures from -40°C to +105°C. Standard Specifications Parameter Min. Typ. Max. Unit Test Condition / Description Nominal frequency (Fn) 10 52 MHz Frequency calibration ±1 ppm At 25°C±2°C, at time of shipment reference to nominal frequency Reflow shift ±1 ppm After 1 hour recovery at 25°C Frequency stability over temperature ±0.2 – 0.5 ppm Reference to (FMAX + FMIN)/2 Operating temperature range 1 -55 105 °C Operating temperature range over which temperature stability is measured Slope over temperature (ΔF/ΔT) 20 100 ppb/°C Temperature ramp 1°C/minute Supply voltage stability ±0.1 ppm ±5% variation Load sensitivity ±0.1 ppm ±5% variation Long term stability (≤26 MHz) ±1 ppm ppm 1 year 10 years Long term stability (>26 MHz) ±2 ppm ppm 1 year 10 years Acceleration sensitivity 0.2 0.5 ppb/g Gamma vector over operating temperature range Supply voltage, VCC Current (C/Sine) Current (HCMOS) 2.5 2.5 6 V mA mA ±5%, standard values are 3.0, 3.3 and 5.0 V Output voltage – C/Sine Load resistance Load capacitance 0.8 V kΩ pF Peak to peak voltage Output voltage (HCMOS) Voltage level low (VOL) Voltage level high (VOH) Rise and fall time Duty cycle Load 0.9 0.1 Vs Vs ns pF Measured with Vcc = 3.3 V Measured at 50% level Control voltage range 0.5 2.5 V Vc Slope +7 ppm/V Frequency tuning >26 MHz ≤26 MHz ppm 1 Wider temperature ranges are available at certain frequencies. Features Applications 7.0 x 5.0 x 1.5 mm ▪ g-sensitivity typically ≤0.2 ppb/g ▪ Excellent frequency stability over temperature performance ▪ Extended operating temperature up to -55/105°C ▪ Variants tailored to specific customer requirements ▪ Defence ▪ Guidance ▪ Avionics ▪ Precision GNSS/Positioning ▪ Communications
Pluto+™ Low Acceleration Sensitivity TCXO/TCVCXO Issue: B, 23 March 2022 Specifications are subject to change without notice Copyright © 2014 to 2022, Rakon Limited. All rights reserved Page 2 of 2 Contact Us Parameter Min. Typ. Max. Unit Test Condition / Description Input resistance 100 kΩ Modulation bandwidth 1 Hz Environmental Specifications Parameter Description Vibration JESD22-B103 (section 4.2.2)/MIL-STD-202, M204, 20g, 10 to 2000Hz Mechanical shock JESD22-B104 (service condition B), 5 shocks in 6 axes (30 shocks total),1500g peak value, 0.5ms duration, half-sine waveform SSB Phase Noise (Typical value at 25°C) Model Outline and Recommended Pad Layout RMS Jitter = 290fs (12kHz ~ 5MHz)