RPT5032P RAKON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

PLUTO+ ™ ULTRA STABLE SMD VC-TCXO | SMALL CELLS Issue: D, 16 October 2024 Specifications are subject to change without notice. Copyright © 2014 to 2024 Rakon Limited. All rights reserved Page 1 of 2 Contact Us RPT5032P The RPT5032P encompasses Rakon ’s patented Pluto+ ASIC technology and is specifically designed to meet the short and medium term stability requirements of packet network synchronisation for Small Cells. This oscillator has low jitter to meet network interface requirements (e.g. 10GE) and low phase noise to meet the radio interface requirements of LTE -A (TS 36.104) and WCDMA (TS 25.104) transceivers – enabling a single device to be used for both functions. Its superb frequency versus temperature a nd slope performance, together with the elimination of discrete filter caps makes the RPT5032P the ideal choice for small form factor Small Cell synchronisation requirements. Standard Specifications Parameter Min. Typ. Max. Unit Test Condition / Description Nominal frequency (Fn) 19.2 – MHz Standard frequencies: 19.2, 25.0, 24.576, 26.0, 30.72, 38.4 and 40.0MHz Frequency calibration ±1.0 ppm Initial accuracy at 25°C ±1°C Reflow shift ±0.5 ppm Pre to post reflow ∆F (measured ≥ 60 minutes after reflow) Operating temperature range -40 85 °C Temperature rate of change 1 °C/min Maximum rate of change of temperature condition for guaranteed stability specifications In-service short term frequency stability ±50 – ±250 ppb All effects for 24 hours Slope over temperature (ΔF/ΔT) ±20 – ±100 ppb/°C Supply voltage stability ±10 ppb ±2% variation Reference to frequency at nominal supply voltage Load sensitivity ±10 ppb • HCMOS: ±1pF variation,

  • Clipped sine wave: ±2% variation Reference to frequency at nominal load Long term stability (ageing) ±20 ±200 ppb/day ppb/month ±1ppm/year ±3ppm/10 yeas Acceleration sensitivity <2 ppb/g Gamma vector, 3–axes, 30–1500Hz Start-up time 15 ms 90% amplitude Supply voltage, VCC Current C/Sine Current HCMOS 2.5 5.7 V mA mA Standard values 3.0 and 3.3, other values available upon request Oscillator output – C/Sine 0.8 Vpp Load 10pF//10kΩ Oscillator output – HCMOS Output voltage level high (VOH) Output voltage level low (VOL) Duty cycle Rise & fall time 0.9VCC 0.1VCC V V ns At 50% level Between 10% and 90% Control voltage Tuning range Input resistance 0.5 100 2.5 ±12 V ppm kΩ Features Applications 5.0 x 3.2 x 1.75 mm  Patented ‘varactor linearisation’ removes the effects of tilt when using voltage control  Clipped sine wave and HCMOS output options available  LTE phase noise compliant  Temperature sensor option  Small Cells
  • WCDMA
  • LTE
  • LTE-A

PLUTO+ ™ ULTRA STABLE SMD VC-TCXO | SMALL CELLS Issue: D, 16 October 2024 Specifications are subject to change without notice. Copyright © 2014 to 2024 Rakon Limited. All rights reserved Page 2 of 2 Contact Us SSB Phase Noise (Typical value at 25°C) Model Outline and Recommended Pad Layout (6 Pad) Test Circuit RMS Jitter = 280 fs (12 kHz ~ 5 MHz) RMS Jitter = 300 fs (12 kHz ~ 5 MHz)