RPT5032GX RAKON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Pluto+™ High G-Shock SMD TCXO Issue: B, 23 October 2024 Specifications are subject to change without notice Copyright © 2022 to 2024 Rakon Limited. All rights reserved Page 1 of 2 Contact Us RPT5032GX The RPT5032GX is a miniature surface-mount, High G-Shock TCXO (Temperature Compensated Crystal Oscillator) that withstands force at an acceleration of more than 30,000g. Its robustness is derived from Rakon’s patented RGX crystal. With a unique mechanical construction, the RPT5032GX survives high levels of shock and vibration while maintaining a low acceleration sensitivity of 0.8 ppb/g (typical value). The RPT5032GX is available in an industry-standard hermetically-sealed package measuring 5.0 x 3.2 x 2 mm. At the heart of this Ultra Stable TCXO is Pluto+™, the latest in a range of in-house developed frequency control ASICs. It features improved phase noise performance which remains stable under high vibration. The wide operating temperature range of - 55 to 105°C (stability < ±0.5 ppm) makes it ideal for harsh environments. With a typical power consumption of only 10 mW, it is suitable for portable, battery powered applications. The RPT5032GX is recommended where a wide temperature range and high shock tolerance are required such as in defence applications or industrial applications like down-hole drilling and data logging. Standard Specifications Parameter Min. Typ. Max. Unit Test Condition / Description Nominal frequency (Fn) 10 – 50 MHz Frequency calibration ±1 ppm Initial accuracy at 25 ± 1°C Reflow shift ±1 ppm Pre to post reflow ΔF (measured ≥ 60 minutes after reflow) Operating temperature range -55 105 °C Frequency stability over temperature ±0.5 ppm Reference to (FMAX + FMIN)/2 Slope over temperature (ΔF/ΔT) ±0.1 ppm/°C Supply voltage stability ±0.1 ppm ±5% variation Reference to the frequency at nominal VCC Load sensitivity ±0.1 ppm ±5pF / ±10% variation, reference to the frequency at nominal load Long term stability (ageing @ 20 MHz, 25°C) ±1 ppm 1 year 10 years Acceleration sensitivity X-axis Y-axis Z-axis Γ vector, 3 to 1500Hz 0.3 0.2 0.5 0.8 ppb/g @ 20 MHz Shock 30,000 g Half sinewave acceleration of 30,000g peak amplitude for 1ms duration in z−axis Supply voltage (VCC) 3.0 3.3 3.6 V Supply current 3.5 4.7 mA HCMOS output Output voltage low (VOL) Output voltage high (VOH) Rise and fall time Duty cycle Output load 0.9VCC 0.1VCC V V ns pF Device disabled, output in high impedance state Device enabled, operating 10% to 90% level At 50% level Tri-state control Input level low Input level high Current Output enable time 0.6VCC 0.2VCC 100 V V mA µs Device disabled, output in high impedance state Device enabled, operating Features Applications 5.0 x 3.2 x 2.0 mm  High G-Shock 30,000g  Expended operating temperature range: –55° to 105°C  Low acceleration sensitivity  Small form factor  Defence and military  Aerospace  Mining and oilfields  GNSS positioning

Pluto+™ High G-Shock SMD TCXO Issue: B, 23 October 2024 Specifications are subject to change without notice Copyright © 2022 to 2024 Rakon Limited. All rights reserved Page 2 of 2 Contact Us SSB Phase Noise (Typical value at 25°C)

50 MHz RPT5032GX SSB Phase Noise

Model Outline and Recommended Pad Layout pads is a keep-out area, no tracks or ground plane allowed on any lay Pin Connections 1* Do not connect / GND / VC

2 GND

3* Temperature sensor output (VTEMP)/VREF/Do not connect

4 RF output

5 Supply voltage (VCC)

6 Tri-state control (Enable)

  • Depending on the specifications NOTE:
  • Dimensions are in millimetres.
  • The area between the pads is a keep-out area, not tracks or ground plane allowed on any layer. Frequency (Hz) SSB Phase Noise (dBc/Hz)