RPM42E7 SCHNEIDER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Harmony, Power plug-in relay, 15 A, 4 CO, with LED, with lockable test button, 48 V AC Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 15.74 USD Main Range of product Harmony Electromechanical Relays Series name Power Product or component type Plug-in relay Device short name RPM Contacts type and composition 4 C/O [Uc] control circuit voltage 48 V AC 50/60 Hz [Ithe] conventional enclosed thermal current Status LED With Control type Lockable test button Utilisation coefficient 20 % Complementary Shape of pin Flat [Ui] rated insulation voltage 250 V IEC

300 V CSA

300 V UL

[Uimp] rated impulse withstand voltage 4 kV 1.2/50 µs Contacts material AgNi [Ie] rated operational current 15 A 277 V AC) UL

15 A 28 V DC) UL

15 A 250 V AC) NO IEC

15 A 28 V DC) NO IEC

7.5 A 250 V AC) NC IEC

7.5 A 28 V DC) NC IEC

Maximum switching voltage 250 V IEC Resistive load current 15 A 250 V AC Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications * Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price. Aug 9, 2021

15 A 28 V DC

Maximum switching capacity 3750 VA 420 W Minimum switching capacity 170 mW 10 mA, 17 V Operating rate <= 1200 cycles/hour under load <= 18000 cycles/hour no-load Mechanical durability 10000000 cycles Electrical durability 100000 cycles resistive Average coil consumption in VA 2.5 60 Hz Drop-out voltage threshold >= 0.15 Uc AC Operate time 20 ms at nominal voltage Release time 20 ms at nominal voltage Average coil resistance 310 Ohm at 68 °F (20 °C) +/- 15 % Protection category RT I Test levels Level A Operating position Any position Pollution degree 3 Safety reliability data B10d = 100000 Net weight 0.16 lb(US) (0.071 kg) Device presentation Complete product Environment Dielectric strength 1500 V AC between contacts with micro disconnection

2000 V AC between coil and contact with reinforced

2000 V AC between poles with basic

Standards CSA C22.2 No 14 EN/IEC 61810-1 UL 508 Product certifications EAC UL CSA Ambient air temperature for storage -40…185 °F (-40…85 °C) Ambient air temperature for operation -40…131 °F (-40…55 °C) Vibration resistance 3 gn +/- 1 mm 10…150 Hz)5 cycles in operation 5 gn +/- 1 mm 10…150 Hz)5 cycles not operating Degree of protection (Housing only) IP40 conforming to EN/IEC 60529 Shock resistance 15 gnin operation 30 gnnot operating Ordering and shipping details Category 21127 - ZELIO ICE CUBE RELAYS Discount Schedule CP2 GTIN 03389119402224 Nbr. of units in pkg. 1 Package weight(Lbs) 2.65 oz (75 g) Returnability No Country of origin CN Packing Units Unit Type of Package 1 PCE Package 1 Height 1.18 in (30 mm) Package 1 width 1.69 in (43 mm) Package 1 Length 1.97 in (50 mm)

Sustainable offer status Green Premium product California proposition 65 WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov REACh Regulation REACh Declaration REACh free of SVHC Yes EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Toxic heavy metal free Yes Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile WEEE The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty 18 months

Symbols shown in blue correspond to Nema marking.

Electrical Durability of Contacts Durability (inductive load) = durability (resistive load) x reduction coefficient. Resistive AC load X Switching capacity (kVA) Y Durability (Number of operating cycles) Reduction coefficient for inductive AC load (depending on power factor cos ϕ) Y Reduction coefficient (A) Maximum switching capacity on resistive DC load X Voltage DC Y Current DC Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.