RP17-SC-122

RP17 HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

2018.9w Small-sized, plastic type, push-pull lock connectors RP17 Series ■Features 1. Superior mating operability ɾSecure mating and easy unmating is achieved by a push-pull locking mechanism. ɾWhite index markings are provided on the mating positions of the plug for easy mating alignment. ɾOur proprietary guide key allows for blind mating conditions to be accomplished easily. 2. Light weight and robust design The strong outer shell is made of glass-reinforced polycarbonate resin, and produces a light but highly durable connectors. 3. Anti-static electricity type The metal plates in the receptacle protect the signal lines from static electricity. ˙Product Specifications Ratings Rated current Contact numbers 1, 3 to 10 : 2 A (when using a wire of at least 26 AWG) Contact numbers 2, 11, 12 : 5 A (when using a wire of at least 22 AWG) Operating temperature range −10 to ʴ60ˆ Rated voltage AC100V, DC140V Storage temperature range −10 to ʴ60ˆ Items Specifi cations Conditions 1. Contact resistance 15mø max. DIP Type : 20mø max Measured at DC 1A 2. Insulation resistance 1,000Mø min. Measured at DC 500V 3. Withstanding voltage No fl ashover or dielectric breakdown. AC 1000V for 1 minute 4. Vibration resistance No electrical discontinuity for 10µs or greater. 10 to 55Hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each direction 5. Shock resistance No electrical discontinuity for 10µs or greater. Acceleration : 490m/s , duration : 11ms, 3 axis directions, 3 times each direction 6. Mating cycles Contact resistance : 20mø max. Dip type : 25mø max. 1,000 times 7. Temperature cycle Insulation resistance : 1,000Mø min. −55ˆ : 30 minutes ➝ Normal temperature : 10 to 15 minutes ➝ 85ˆ : 30 minutes ➝ Normal Temperature : 10 to 15 minutes, left for 5 cycles 8. Moisture resistance Insulation resistance : 10Mø min. (at high humidities) 100Mø min. (when dry) Temperature : 40ˆ, relative humidity : 90 to 95%, left for 96 hours ˙Materials / Finish Items Material Finish Remarks Plug Receptacle Shell, insulator 1In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.

■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. ˔ Plug RP17 A - 13 P A - 12 S C (01) ⁞ Model name : RP17 Series Type identifi cation No marking : Standard type A : Anti-static electricity type ⁠ Shell size : The shell size is measured at the outer diameter of the mating interface of the plug. ⁡ Shell type P : Straight plug R : Receptacle J : Jack ⁢ Shell variation : Connectors are distinguished by A, B, or C if another variation is applied in the same form. ⁣ Number of contacts ⁤ Contact form S : Female contact P : Male contact ⁥ Contact termination method: C : Contact termination by crimping D : Straight PCB dipping method ⁦ Other specifi cations : A two-digit character is added to indicate other specifi cations when needed. ˔ Crimp contact RP17 - SC - 2 1 2 ⁞ Model name : RP17 ⁦ Contact type : SC : Crimped female contact PC : Crimped male contact ⤒ Contact form 1 : Loose piece contacts 2 : Reel contacts ⤓ Applicable wire gauge 1 : For 18 to 22 AWG 2 : For 24 to 30 AWG ⤔ Type of plating 2 : Silver plating RP17 Series●Small-sized, plastic type, push-pull lock connectors

˙Receptacle (standard type) ̓̍̎ 2-M2.6ʷ0.45 2.5 3.2 7.5 16.7 Ø15Ø19 Ø15.5 45˃ ˘9.7 Part No. HRS No. RP17-13R-12SC(71) 113-0502-3 71 RP17-13R-12SC(71) (Crimping type) ˙Plug (anti-static electricity type) Ø5.3 Ø15 Part No. HRS No. RP17A-13P-12PC(71) 113-0551-9 71 Note : Cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. We recommend that you verify the suitability of the cable assembly before use or production. RP17A-13P-12PC(71) ■Plug (standard type) Part No. HRS No. ØAB RP17-13P-12PC(71) 113-0501-0 71 5.3 46 RP17-13PA-12PC(71) 113-0512-7 71 6.1 51 Note : Cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. We recommend that you verify the suitability of the cable assembly before use or production. RP17-13P-12PC(71) Ø15 (Representative example.) RP17 Series●Small-sized, plastic type, push-pull lock connectors

RP17 Series●Small-sized, plastic type, push-pull lock connectors ̓̍̎ 2-M2.6ʷ0.45 (Dip post diameter) 0.5ʷ0.3 3.512 3.27.5 2.5 Ø15 Ø19Ø15.5 45˃ Part No. HRS No. RP17-13RA-12SD(71) 113-0511-4 71 Remarks : See page 5 for details on dip post assignment and layout. RP17-13RA-12SD(71) ■Receptacle (standard type) (PCB dip type) ■Jack (standard type) Part No. HRS No. A ØB RP17-13J-12SC(71) 113-0515-5 71 44 5.3 RP17-13JA-12SC(71) 113-0516-8 71 49 6.1 Note : Cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. We recommend that you verify the suitability of the cable assembly before use or production. RP17-13J-12SC(71) (Representative example.) (Dip post for signal contact) 0.5ʷ0.3 1ʷ0.4 (Dip post for ground contact) 2-M2.6ʷ0.452.5 3.5 12 3.2 7.5 20 Ø19 Ø15 Ø15.5 Part No. HRS No. RP17A-13RA-12SD(71) 113-0553-4 71 Remarks : See page 5 for details on dip post assignment and layout. RP17A-13RA-12SD(71) ■Receptacle (anti-static electricity type) (PCB dip type)

RP17 Series●Small-sized, plastic type, push-pull lock connectors ̎ ̍ ̍̍ ̍̍ ̒ ̏ 1 1 1.2 1.2 2.43.8 0.4 2.6 1.6 1.2 1.2 4.6 2.43.8 0.41.6 2.6 12ʷØ0.7 1-Ø1.1 (Ground contact) 12ʷØ0.7 Remarks : The machining tolerance of ±0.05 is recommended for the PCB layout dimensions. ⿆Applicable tools Type Items Part No. HRS No. Applicable contact Applicable wire size Manual Manual crimping tools RP17-TC-11 150-0043-8 RP17-PC SC-112 18 to 22 AWG RP17-TC-12 150-0044-0 RP17-PC SC-122 24 to 30 AWG Auto Automatic Applicator AP105-RP17-1 901-2036-9 RP17-PC SC-212 18 to 22 AWG AP105-RP17-2 901-2026-5 RP17-PC SC-222 24 to 30 AWG Automatic crimping press (Type CM-105C) Cable crimping tool (The handle shape shown is a representative example.) Extraction tool Manual crimping tools ⿆Dip post assignment and layout for receptacles (Figures show as when viewed from the receptacle mating side.) ˔(Standard type) ˔(Anti-static electricity type) ̘ ̘ 1.21.2 A-A A-A ■Contact Male contact Female contact Type Part No. HRS No. B C Applicable wire size Loose piece contacts RP17-PC-112 113-0503-6 1.6 2.1 18 to 22 AWG RP17-PC-122 113-0504-9 1.2 1.35 24 to 30 AWG Reel contacts RP17-PC-212 113-0507-7 1.6 2.1 18 to 22 AWG RP17-PC-222 113-0508-0 1.2 1.35 24 to 30 AWG Type Part No. HRS No. B C Applicable wire size Loose piece contacts RP17-SC-112 113-0505-1 1.6 2.1 18 to 22 AWG RP17-SC-122 113-0506-4 1.2 1.35 24 to 30 AWG Reel contacts RP17-SC-212 113-0509-2 1.6 2.1 18 to 22 AWG RP17-SC-222 113-0510-1 1.2 1.35 24 to 30 AWG

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 09/2018. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ⿆ Termination procedure ˔ Plug Operation procedure 1. First, pass the terminated cable in the following order through the: cord tube, spring, connection sleeve, and cord bushing. Then crimp and terminate the contacts. 2. Assemble the crimped and terminated contacts to the contact holes of the P-insulation P case. At this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the P-insulation P case by slightly pulling on the cable. 3. Attach the metal fitting by clamping to it the cord bushing and assemble these into the P-insulation P case. Then crimp the metal fitting by clamping it with the applicable tool (RP17-TC-01). 4. Next, attach in the following order to the P-insulation P case: connection sleeve, spring, and cord. Then align the screw hole of the cord tube and that of the metal fitting for clamping, and tighten the round flat screw to the specified torque of 0.2 N·m (2 kg·cm). 5. After the assembly procedure descr ibed above has been completed, please make sure that the connection sleeve moves correctly. $BCMF $PSEUVCF 4QSJOH 3PVOEqBUTDSFX $POOFDUJPOTMFFWF .FUBMpUUJOHGPS DMBNQJOH 1JOTVMBUJPO 1DBTF $PSE CVTIJOH ʴ ʵ ʶ "SSPXWJFX" PSNPSF ⿆ Contact arrangement Remarks : 1. The fi gure shows the receptacle when viewed from the mating end (plug connection end). Contact arrangement ̍̎ ̍̍ ̒ ̏ Precautions This product series uses silver plated contacts. Silver reacts easily to exposure to sulfur gas so the below conditions may cau se tarnishing. ɹɾDusty environments ɹɾArea with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. Example; In close proximity to factory exhaust, automotive emissions, etc. ɹɾClose to heaters, or in other areas marked by extreme temperature differences or high humidity. ɹɾClose to rubber products includes rubber adhesives. The Electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. Storage Packing state; Packed in original packing or equivalent container Temperature -10 to +60ç Humidity 85% Max (It is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) Please use this products within 6 months of delivery. (After 6 month, please check the solderbility before use) “Storage” means long-term storage of the unused products in sealed packaging, prior to assembly to PCB. RP17 Series●Small-sized, plastic type, push-pull lock connectors Powered by TCPDF (www.tcpdf.org)