RP13 HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
- Superior mating operability A secure mating condition is achieved by simply pushing the plug on to the receptacle; Pull back on the locking sleeve to easily un-mate the connector. Index marks are provided on the plug for easy mating alignment. Our proprietary guide keys aid with making a correct mating orientation in blind or low light conditions. 2. Light weight and robust design The strong outer shell is made of glass-reinforced polycarbonate resin, producing light but durable connectors. 3. Available in an anti-static version The anti-static version connects the plug and receptacle housing together in such a way that the surrounding shield guards against the effects of static electricity. 4. Variation Items Number of contacts 13, 15, 20 Connector type Plug and jack: Straight, Receptacle: Straight, right angle Plug termination type Crimp Receptacle termination type Crimp, PCB dip Receptacle mounting style Flange, jam nut Product Specifi cations Ratings Rated current Standard type : 2A (when using a wire of at least 24 AWG) Anti-static type : 2A (when using a wire of at least 22 AWG) Operating temperature range −10 to +60ç Rated voltage For 13 and 15 contact positions : AC 30V, DC 42V 20 contacts : AC 100V, DC 140V Storage temperature range −10 to +60ç Items Specifi cations Conditions 1. Contact resistance For 13 and 15 contact positions : 15mø max. 20 contacts : 30mø max. Measured at DC 1A 2. Insulation resistance 1,000Mø min. Measured at DC 250V 3. Withstanding voltage No fl ashover or dielectric breakdown. AC 300V for 1 minute 4. Vibration resistance No electrical discontinuity for 10µs or greater. 10 to 55Hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. Shock resistance No electrical discontinuity for 10µs or greater. Acceleration : 490m/s , duration : 11ms, 3 axis directions, 3 cycles each 6. Mating cycles Contact resistance : For 13 and 15 contact positions : 20mø max. For 20 contact positions : 45mø max. 1,000 times 7. Temperature cycle Insulation resistance : 100Mø min. -55ç : 30 minutes ➝ Normal temperature : 10 to 15 minutes ➝ 85ç : 30 minutes ➝ Normal temperature : 10 to 15 minutes, leave total 5 cycles 8. Moisture resistance Insulation resistance : 10Mø min. (at high humidity) 100Mø min. (when dry) Temperature : 40ç, relative humidity : 90 to 95%, leave 96 hours Materials / Finish Items Material Finish Remarks Plug Receptacle Steel Nickel plating Male contact Brass In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1
■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Plug RP13A - 12 P A - 13 S C (01) qModel name : RP13A Series wShell size : The shell size is the outer diameter of the mating end of the plug. eShell type P : Straight plug R : Receptacle J : Jack rShell variation : Connectors are distinguished by A, B, or C if a variation is made within the series. tNumber of contacts yContact form S : Female contact P : Male contact uContact termination type: A : Straight, PCB dip B : Right-angle, PCB dip C : Contact termination by crimping iOther specifi cations : A two-digit character is added to indicate other specifi cations as needed. Crimp contact RP13A - SC - 2 1 1 q Model name : Indicates the series name. RP13, RP13A, RP19 o Contact type : SC : Socket type crimp contact (female) PC : Pin type crimp contact (male) !0 Contact form : 1 : Loose piece contacts 2 : Reel contacts !1Barrel form : RP13, RP13A 1 : For 18 to 22 AWG 2 : For 24 to 28 AWG RP19 1 : For 18 to 22 AWG 2 : For 24 to 30 AWG !2 Identifi cation of plating : 1 : Gold plating 2 : Silver plating RP13 Series●Plastic Push-Pull Lock Connectors
(Crimp type) (Dip type ) Standard plug Standard type Receptacle (Flange type) (Minimum dimension) Ø16.9 ̍̏ ̍̎ 2-̗ (Hole is threaded on metal flange portion) Press-fitted metal flange Ø 14.3 103.2 Ø19 45° 0.5×0.3 (Dip post diameter) Press-fitted metal flange (Hole is threaded on metal flange portion) 2-M2.6×0.45 18.1 3.2 10 Ø 14.3 Ø19 45° ̍̏ ̍̎ Part No. HRS No. No. of contacts AB Ø C Weight RP13A-12PA-13SC(71) 113-0182-4 71 47.2 32 6.1 6.0g RP13A-12PB-13SC(31) 113-0184-0 31 5.7 RP13A-12PD-13SC(71) 113-0186-5 71 52.2 37 6.1 RP13A-12PE-13SC(71) 113-0201-7 71 47.2 32 6.4 RP13A-12PK-13SC(71) 113-1006-7 71 52.2 37 7.1 RP13A-12PS-13SC(71) 113-1026-4 71 8.1 RP13A-12PD-15SC(71) 113-0206-0 71 6.1 RP13A-12PK-15SC(71) 113-0219-2 71 7.1 RP13A-12PP-15SC(71) 113-1010-4 71 7.5 Part No. HRS No. No. of contacts AB Ø C Weight RP13A-12PD-20SC(71) 113-0214-9 71 52.2 37 6.1 6.0g RP13A-12PG-20SC(71) 113-0210-8 71 7.5 RP13A-12PH-20SC(71) 113-0217-7 71 47.2 32 6.4 RP13A-12PK-20SC(71) 113-1012-0 71 52.2 37 7.1 RP13A-12PS-20SC(71) 113-1022-3 71 8.1 (Note) Cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable is suitable for use with these connectors before usage and production. Part No. HRS No. No. of contacts A B Weight RP13A-12RA-13PC(71) 113-0183-7 71 13 18.1 M2.6×0.45 4.0gRP13A-12RA-15PC(71) 113-0207-3 71 15 RP13A-12RA-20PC(71) 113-0215-1 71 20 16 (Remarks) See page 5 for details on mounting hole dimensions. Part No. HRS No. No. of contacts A B Weight RP13A-12RA-13PA(71) 113-0202-0 71 13 21.5 3 5.0gRP13A-12RA-15PA(71) 113-1002-6 71 15 (Remarks) See page 5 for details on mounting dimensions and page 7 for details on dip post arrangement sizes. RP13A-12RA-13PC(71) RP13A-12RA-13PA(71) (Representative example.) (Representative example.) (Representative example.) RP13A-12PA-13SC(71) RP13 Series●Plastic Push-Pull Lock Connectors
(Dip type) Receptacle (Jam nut to be fastened) M12×1 (Dip post diameter) 0.5×0.3 Ø 14.3 18.1 ̍̏ ̍̎ Part No. HRS No. A B No. of contacts Weight RP13A-12RB-13PA(71) 113-0203-2 71 21.5 3 13 3.5g (Remarks) See page 5 for details on mounting hole dimensions and page 7 for details on dip post arrangement sizes. RP13A-12RB-13PA(71) Right-angle, dip type Dip post diameter (Center of the screw hole for mounting the connector) ̐ ̍ ̎̌̍ ̓ (Note) Panel thickness: 1.5mm max. 3.5 (Note) Ø15 mm or more Ø14.3 ̘ ̗ 4×R 1 Part No. HRS No. No. of contacts A B C ØD E F Weight (Remarks) See page 7 for details on dip post arrangement sizes. RP13A-12RC-20PB (Note) The mounting panel thickness should be 1.5mm or less. Mounting hole should be Ø15 mm or more. Jack (Minimum dimension) Ø16.9 Part No. HRS No. No. of contacts A B ØC Weight RP13A-12J-13PC(71) 113-0166-8 71 13 49.1 34.6 6.1 4.5g RP13A-12JD-15PC(71) 113-1005-4 71 15 54.1 39.6 RP13A-12JK-15PC(71) 113-0218-0 71 7.1 RP13A-12JG-20PC(71) 113-1004-1 71 20 52.6 37.4 7.4 (Note) Cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable is suitable for use with these connectors before usage and production. (Representative example.) RP13A-12J-13PC(71) RP13 Series●Plastic Push-Pull Lock Connectors
(Male contact) (Female contact) (Flange type) (Jam nut to be tightened) Type Part No. HRS No. Plating B C D E Applicable wire size Loose piece contacts RP13-PC-122 113-0179-0 Silver plating 1.2 1.35 13.9 1.4 24 to 28 AWG Reel contacts RP13-PC-221 113-0360-0 Partial gold plating RP13-PC-222 113-0141-7 Silver plating Type Part No. HRS No. Plating B C D E Applicable wire size Loose piece contacts RP13A-SC-121 113-0363-9 Partial gold plating 1.2 1.35 13.9 1.4 24 to 28 AWG RP13A-SC-122 113-0181-1 Silver plating Reel contacts RP13A-SC-221 113-0362-6 Partial gold plating RP13A-SC-222 113-0151-0 Silver plating Type Part No. HRS No. Plating B C D E Applicable wire size Loose piece contacts RP13-PC-112 113-0178-7 Silver plating 1.6 2.1 13.9 1.4 18 to 22 AWG Reel contacts RP13-PC-212 113-0140-4 Type Part No. HRS No. Plating B C D E Applicable wire size Loose piece contacts RP13A-SC-112 113-0180-9 Silver plating 1.6 2.1 13.9 1.4 18 to 22 AWG Reel contacts RP13A-SC-212 113-0150-8 Type Part No. HRS No. Plating B C D E Applicable wire size Loose piece contacts RP19-PC-122 113-0268-8 Silver plating 1.2 1.35 12 1.18 24 to 30 AWG Reel contacts RP19-PC-222 113-0264-7 Type Part No. HRS No. Plating B C D E Applicable wire size Loose piece contacts RP19-SC-122 113-0270-0 Silver plating 1.2 1.35 11 1.18 24 to 30 AWG Reel contacts RP19-SC-222 113-0266-2 ̖-̖ ̖-̖ For 13 and 15 contact positions For 13 and 15 contact positions 13 contact position for super-thick wires (available for contact position numbers 12 and 13 only) 13 contact position for super-thick wires (available for contact position numbers 12 and 13 only) For 20 contact positions For 20 contact positions (Representative example.) (The form shown above represents an example.) Panel mounting hole dimensions 3.1 ʴ0.05 7.5ʴ0.05 20±0.05 2×Ø2.8 ʴ0.2 Ø14.4 ʴ0.05 45°±30 7.1 ʴ0.1 Ø12.1 ʴ0.1 Ø13.8 ʴ0.1 ɹ (Note 1) Use connectors with gold-plated contacts if the connectors will be subjected to constant vibration. (Note 2) Loose piece contacts are available in 100 piece packs. Reel contacts are available as 10,000 piece reels. (Note 1) Above figures show the arrangement viewed from the panel surface. The mating guide of flange type is located on the top position. (Note 2) The applicable panel thickness for the flange type receptacle is 2.7mm max., since this type is mounted from the back surface of the panel. (Note 3) The applicable panel thickness for a hex nut fastening type is 5mm max. and 1mm min. Applicable connector Part No. HRS No. RP13A-12RA-13PC(71) 113-0183-7 71 RP13A-12RA-13PA(71) 113-0202-0 71 RP13A-12RA-15PC(71) 113-0207-3 71 RP13A-12RA-15PA(71) 113-1002-6 71 RP13A-12RA-20PC(71) 113-0215-1 71 Applicable connector Part No. HRS No. RP13A-12RB-13PA(71) 113-0203-2 71 RP13 Series●Plastic Push-Pull Lock Connectors
(Minimum dimension) Ø6.1 Ø 16.9 47.2 Part No. HRS No. No. of contacts Weight RP13A-12PA-13PC(71) 113-4003-5 71 13 6.0g (Note) Cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable is suitable for use with these connectors before usage and production. (Representative example.) RP13A-12PA-13PC(71) RP13A anti-static type Receptacle (flange type) Press-fitted metal flange 2×Ø2.8 (hole) (metal flange) П14.3 П19 45° Part No. HRS No. No. of contacts Weight RP13A-12R-13SC(71) 113-4002-2 71 13 4.0g (Remarks) See page 7 for details on mounting hole dimensions. (Representative example.) RP13A-12R-13SC(71) (Crimp type) Contact (Male contact) (Female contact) Type Part No. HRS No. BCDE Applicable wire size Loose piece contacts RP19-PC-122 113-0268-8 1.2 1.35 12 1.18 24 to 30 AWG Reel contacts RP19-PC-222 113-0264-7 Type Part No. HRS No. BCDE Applicable wire size Loose piece contacts RP19-SC-122 113-0270-0 1.2 1.35 11 1.18 24 to 30 AWG Reel contacts RP19-SC-212 113-0265-0 1.6 2.1 18 to 22 AWG RP19-SC-222 113-0266-2 1.2 1.35 24 to 30 AWG ̖-̖ ̖-̖ (Note 1) Loose piece contacts are available in 100 piece packs. Reel contacts are available as 10,000 piece reels. Only contact positions 12 and 13 can be used with 18 to 20 AWG wire. Other contact positions numbers cannot be used with this wire gauge. (Note 2) When crimping wires gauge 18 to 22 AWG, make sure that the outer insulation diameter is Ø1.79mm or less. For wires gauges 24 to 30 AWG, use an outer insulation diameter of Ø1.15 or less. RP13 Series●Plastic Push-Pull Lock Connectors
(Flange type) Panel mounting hole dimensions (for anti-static type) 3.1 +0.1 7.5 +0.1 20±0.1 2× П2.8 ʴ0.2 Ø14.4 +0.1 0 45°±30˄ (Note 1) Above fi gures show the arrangement viewed from the panel surface. The mating guide of fl ange type is located on top the position. (Note 2) The applicable panel thickness for a fl ange type receptacle is maximum 4.7mm, as this type is mounted from the back surface of the panel. Dip post arrangement sizes for receptacles Straight dip type Right-angle, dip type 13 contacts 15 contacts ̍̏̍̎ ̍̎ ̏ ̐ ̓ ̔ 11 Ø0.6 (13 positions) (15 positions) 15 13 34 2 1 912 Ø0.6 2.3 2.3 3.45 3.45 1.15 1.15 1.4 1.4 0.61.35 3.75 2.55 0.95 1.25 3.15 2.3 1.15 1.15 2.3 3.45 3.45 2.75 0.9 2.9 3.35 1.05 (Screw hole for mounting the connector) Use a tapping screw for JIS B 1122 M3. ̍̎̍̏ ̍̍ ̔ Use a tapping screw for JIS B 1122 M3. (Screw hole for mounting the connector) ̍̔̍̍ C.L C.L 1.15 1.15 2.3 2.3 1.4 1.4 3.45 3.45 5222 0.8 0.8 2.42.4 4 4 2222222 (20 positions) Ø0.85 (13 positions) Ø0.9 (Remarks) 1. The fi gures shown above for 13 and 15 contact positions are viewed from the receptacle mating end. 2. A machining tolerance of ±0.05 is recommended for the PCB layout dimensions. (Remarks) 1. The fi gures shown above are viewed from the contact insertion end. 2. A machining tolerance of ±0.05mm is recommended for the PCB layout dimensions. 13 contacts 20 contacts RP13 Series●Plastic Push-Pull Lock Connectors
Type Items Part No. HRS No. Applicable contact Applicable wire size and applicable cable diameter Manual Manual crimping tool RP13-TC-11 150-0024-3 RP13-PC-112 18 to 22 AWG RP13-TC-12 150-0025-6 RP13-PC-121, 122 24 to 28 AWG RP13A-TC-11 150-0026-9 RP13A-SC-112 18 to 22 AWG RP13A-TC-12 150-0027-1 RP13A-SC-121, 122 24 to 28 AWG RP19-TC-11 150-0048-1 RP19-PC-112 RP19-SC-112 18 to 22 AWG RP19-TC-12 RP19-PC-122 RP19-SC-122 24 to 28 AWG Auto Automatic crimping Applicator AP105-RP13-2 901-2024-0 RP13-PC-221, 222 RP13A-SC-221, 222 24 to 28 AWG AP105-RP19-1 901-2013-3 RP19-SC-212 18 to 22 AWG AP105-RP19-2 901-2014-6 RP19-PC-222 RP19-SC-222 24 to 28 AWG Cable crimping tool Ø7~Ø7.5 Extraction tool RP6-SC-TP 150-0039-0 Male/female contact for Automatic crimping press (Type CM-105C) RP6-SC-TP Extraction tools RP13A-SC-TPRP13-PC-TP RP13A-TC-02 Cable crimping tool (handle shape is shown as an example.) RP13-TC-11 Manual crimping tool RP13 Series●Plastic Push-Pull Lock Connectors
Termination/assembly procedure Plug Contact Arrangement (Standard type) (Anti-static type) Assembly procedure 1. First, pass the terminated cable through the cord tube in the following order: spring, connection sleeve, and cord bushing, and then crimp and terminate the contacts. 2. Assemble the crimped and terminated contacts to the contact holes of the P-insulation P case. At this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the P-insulation P case by lightly pulling the cable. 3. Attach the metal fitting by clamping to it the cord bushing and assemble these into the P-insulation P case. Then crimp the metal fitting by clamping it with the applicable tool. 4. Next, attach in the following order to the P-insulation P case: connection sleeve, spring, and cord. Then align the screw hole of the cord tube and that of the metal fitting for clamping, and tighten the round flat screw to the specified torque of 0.2 N•m (2 kg•cm). 5. After the assembly procedure described above has been completed, test the parts to make sure that the locking collar moves correctly. Contact arrangement No. of contacts 13 15 20 Contact arrangement No. of contacts 13 11̔ ̍̎ ̍̏ 1312 11̔ ̍ ̏ 12 11 10 15 13 34 2 1 ̍̒̍ ̍ ̍̌ ̑ ̎̌̍ ̓ (Remarks) 1. The fi gures shown above are viewed from the receptacle and jack mating end (plug connection end). Cable Cord tube Spring Round, fl at head screw Arrow view ALocking collar Metal fi tting for clamping P-insulation P case Cord bushing A 27.3 ʴ3 3.3±0.2 PSNPSF RP13 Series●Plastic Push-Pull Lock Connectors
This product series uses silver plated contacts. Silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. ɹɾDusty environments ɹɾArea with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. Example; In close proximity to factory exhaust, automotive emissions, etc. ɹɾClose to heaters, or in other areas marked by extreme temperature differences or high humidity. ɹɾClose to rubber products includes rubber adhesives. The Electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. Storage Packing state; Packed in original packing or equivalent container Temperature -10 to +60ç Humidity 85% Max (It is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) Please use this products within 6 months of delivery. (After 6 month, please check the solderbility before use) “Storage” means long-term storage of the unused products in sealed packaging, prior to assembly to PCB. RP13 Series●Plastic Push-Pull Lock Connectors
MEMO : RP13 Series●Plastic Push-Pull Lock Connectors
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 07/2018. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE
2841 Junction Ave, Suite 200
San Jose, CA. 95134 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE
300 Brickstone Square Suite 201,
Andover, MA 01810 Phone : +1-978-662-5255 USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE
2300 Warrenville Road, Suite 150,
Downers Grove, IL 60515 Phone : +1-630-282-6700 http://www.hirose.com/us/ CHINA: HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/ KOREA: HIROSE KOREA CO.,LTD. 143, Gongdan 1-daero, Siheung-si, Gyeonggi-do, 15084, Korea Phone : +82-31-496-7000 Fax : +82-31-496-7100 http://www.hirose.co.kr/ GERMANY: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Schoenbergstr. 20, 73760 ostfildern Phone : +49-711-456002-1 Fax : +49-711-456002-299 http://www.hirose.com/eu/ FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
130 Avenue Joseph Kessel, Bat E, 78960
Voisins le Bretonneux, France Phone : +33-1-85764886 Fax : +33-1-85764823 http://www.hirose.com/eu/ THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/ UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/ CHINA: HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS) 18, Enterprise Center Tower 2, 209# Gong He Road, Jing’an District, Shanghai, CHINA 200070 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/ TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7355 http://www.hirose.com/tw/ HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/ INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE Office NO.552, Regus-Green Bo ulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Phone : +91-12-660-8018 Fax : +91-120-4804949 http://www.hirose.com/sg/ SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 03, Anson Road, #20-01, Springleaf Tower, Singapore 079909 Phone : +65-6324-6113 Fax : +65-6324-6123 http://www.hirose.com/sg/ INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ MALAYSIA: PENANG REPRESENTATIVE OFFICE 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Lepas Penang, 11950, Malaysia Phone : +604-648-5536 http://www.hirose.com/sg/ THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/ RP13 Series●Plastic Push-Pull Lock Connectors Powered by TCPDF (www.tcpdf.org)