RP1-1.5V NAIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1Ex. RP H Contact arrangement 1:1 Form C Note: Standard packing; Carton: 50 pcs. Case 1,000 pcs. Nil: Standard PC board terminal H: Self-clinching terminal 1.5, 3, 4.5, 5, 6, 9, 12, 24 V Terminal shape Coil voltage (DC) Arrangement Contact material Movable Stationary Nominal switch- ing capacity Isolation Insertion loss V.S.W.R. Mechanical (at 180 cpm) Electrical (at 20 cpm) Initial contact resistance, max. (By voltage drop 6 V DC 0.1 A) Rating High frequency characteristics Impedance 50W ) Expected life (min. opera- tions) Contact Coil (at 25°C, 68°F) Voltage type 1.5 to 12 V DC

24 V DC

1 Form C

0.1 A 30 V DC

Contact switching power: 1 W (Max. 1.8 GHz); Contact carrying power: 3 W (Max. 1.2 GHz) 1 W (Max. 1.8 GHz) Min. 15 dB (at 1 GHz) Min. 10 dB (at 1.8 GHz) Max. 0.5 dB (at 1 GHz) Max. 1 dB (at 1.8 GHz) Max. 1.2 (at 1 GHz) Max. 1.3 (at 1.8 GHz) 5·10 105 (0.1 A 30 V DC) 105 (1 W at 1.8 GHz; Max. operating speed (at rated load) Initial breakdown voltage*2 Initial insulation resistance*1 Operate time*3 (at nominal voltage) Release time(without diode)*3 (at nominal voltage) Temperature rise Shock resistance Vibration resistance Unit weight Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms, detection time: 10ms *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10ms Approx. 1 g .04 oz Characteristics 20 cpm Min. 1,000 MW at 500 V DC 750 Vrms for 1 min. 1,500 Vrms for 1 min. Between open contacts Between contacts and coil Max. 3 ms (Approx. 1.5 ms) Max. 2 ms (Approx. 1 ms) Max. 50°Cwith nominal coil voltage across coil and at nominal switching capacity Min. 500 m/s 2 {50 G} Min. 1,000 m/s2 {100 G} Functional*4 Destructive*5 Functional*6 Destructive 10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm Conditions for operation, transport and storage (Not freezing and condensing at low temperature) Ambient temp. Humidity –40°C to 70°C –40°F to 158°F 5 to 85% R.H. .748 .157 10.6 .417 TYPICAL APPLICATIONS

  • Antenna switching of mobile phone
  • Switching signal of measuring equipment

ORDERING INFORMATION

  • High frequency relay with the low profile of 4 mm .157 inch
  • Excellent high frequency characteristics Isolation: Min. 10dB (at 1.8 GHz) Insertion loss: Max. 1.0dB (at 1.8 GHz)
  • High sensitivity in small size Size: 10.6 4 mm .417 .354 .157 inch Nominal operating power: 140 mW SPECIFICATIONS mm inch

5.08 .200 7.62 .300 6-1 dia. 6-.039 dia. 2.54 .100 10.6 .417 7.62 .300 .354 3.75 .148 .157 2.54 .100 0.5 .020 0.25 .010 2.54 .100 3.5 .138 (0.25) (.010) 10.6 .417 7.62 .300 .354 3.75 .148 .157 2.54 .100 0.5 .020 0.25 .010 2.54 .100 3.5 .138 (0.25) (.010) Deenergized conditionGeneral tolerance: –0.3 –.012 Self-clinching terminal Schematic (Bottom view) Standard PC board terminal PC board pattern (Copper-side view) mm inch Tolerance: –0.1 –.004 Direction indication 123 654 6–1.60 dia .063 dia 6–1.00 dia .039 dia 6–2.30 dia .090 dia 26–0.80 dia .031 dia 18.92 .7450.60 .024 1.94 .076 4.22 .166 5.08 .200 7.62 .300 18.00 .709 9.82 .387 Soldering SMA connector PC board

  • Double-sided through hole
  • Material: Glass-epoxy resin
  • t= 1.0mm .039 inch
  • Copper plated thickness: 35 mm mm inch 100 0.80 0.4 1.0 Frequency, GHz Isolation, dB Frequency, GHz Insertion loss, dBN.O. (Terminal Nos. 5-6) N.C. (Terminal Nos. 4-5) Frequency, GHz Return loss, dB N.C. (Terminal Nos. 4-5) N.O. (Terminal Nos. 5-6) 100 Frequency, GHz V.S.W.R. N.C. N.O. 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 Part No. RP1-1.5V RP1-H-1.5V RP1-3V RP1-H-3V RP1-4.5V RP1-H-4.5V RP1-5V RP1-H-5V RP1-6V RP1-H-6V RP1-9V RP1-H-9V RP1-12V RP1-H-12V RP1-24V RP1-H-24V 1.5 4.5 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 64.3 145 178 257 579 1,028 2,133 93.8 46.7 31.1 23.3 15.6 11.7 11.3 2.25 4.5 6.75 7.5 13.5 28.8 140 140 140 140 140 140 140 270 1.125 2.25 3.375 3.75 4.5 6.75 Nominal voltage, V DC Standard PC board terminal Self-clinching terminal Pick-up voltage, max. V DC Drop-out voltage, min. V DC Coil resistance, W (–10%) Nominal operating current, mA (–10%) Nominal operating power, mW Maximum. allowable voltage, V DC TYPES ANE COIL DATA (at 20°C 68°F) DIMENSIONS REFERENCE DATA Sample: RP1-6V Measuring method: Impedance 50 W Measuring tool: 1. High frequency characteristics
  • Isolation
  • Insertion loss • Return loss • V.S.W.R

Coil applied voltage, %V Temperature rise, °C 70 80 100 120 150 Max. Max. Min. Min. Coil applied voltage, %V Time, ms Operate time Release time 70 80 100 120 150 Max. Min. Max. Min. Coil applied voltage, %V Time, ms Operate time Release time 100 1,000 50050 Max. Max. Min. Min. No. of operations, ·10 Pick-up/drop-out voltage, VPick-up voltage Drop-out voltage 3020100 Max. Max. Min. Min. No. of operations, ·10 Pick-up/drop-out voltage, V Pick-up voltage Drop-out voltage 100 120 3020100 Max. Min. No. of operations, ·10 Contact resistance, mW –40 –40 –20 02 0 40 60 80 Rate of change, % Drop-out voltage Pick-up voltage Ambient temperature, °C–20 2824 30 0 383634322622 40 Contact resistance, mW Quantity .394 .197 OFF OFF OFF ON ON ON Inter-relay distance, (mm, inch) Rate of change, % Rate of change, % Pick-up voltage Drop-out voltage OFF OFF OFF ON ON ON–5 .394 .197 Inter-relay distance, (mm, inch) Rate of change, % Rate of change, % Pick-up voltage Drop-out voltage OFF ON .394 .197 Inter-relay distance, (mm, inch) Rate of change, % Rate of change, % Pick-up voltage Drop-out voltage 2. Coil temperature rise Sample: RP1-6V; No. of samples: n = 5 Carrying current: 0.1 A Ambient temperature: 25°C 77°F 3. Operate/release time Sample: RP1-9V; No. of samples: n = 50

  • With diode • Without diode 4. Mechanical life Sample: RP1-5V; No. of samples: n = 8
  • Change of pick-up, drop-out voltage 5. Electrical life (0.1 A 30 V DC) Sample: RP1-6V; No. of samples: n = 6
  • Change of pick-up/drop-out voltage • Change of contact resistance 6. Ambient temperature characteristics Sample: RP1-6V; No. of samples: n = 5 7. Contact resistance distribution (initial) Sample: RP1-6V; No. of samples: n = 25 8.-(1) Influence of adjacent mounting Sample: RP1-12V; No. of samples: n = 6 8.-(2) Influence of adjacent mounting Sample: RP1-12V; No. of samples: n = 6 8.-(3) Influence of adjacent mounting Sample: RP1-12V; No. of samples: n = 6

0.2s 0.2s 1.5s 1.5s OFF Trans- mission Dummy load (50W ) WD-2351 Transmission: RF Tranceiver IC-1201 (ICOH) ON RP relay Orientation (indicates PIN No. 1) stripe Stopper (green) A CB

  • Direction A • Direction B • Direction C mm inch 546 .118 .236 11 2 3 (4) (5) (6) 9. High frequency switching test (1.2 GHz, 1 W) Sample: RP1-6V; No. of samples: n = 6 Ambient temperature: 20°C 68°F • Change of pick-up/drop-out voltage • Change of contact resistance 151050 Max. Max. Min. Min. No. of operations, ·10 Pick-up/drop-out voltage, V Pick-up voltage Drop-out voltage 100 120 151050 Max. Min. No. of operations, ·10 Contact resistance, mW 1. Packing direction Relays are packed in a tube with the ori- entation stripe (PIN NO. 1) toward the green stopper. 2. Automatic mounting To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure* in the direction A:

4.9 N {500 gf} or less

Chucking pressure* in the direction B:

9.8 N {1 kgf} or less

Chucking pressure* in the direction C: Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoid- ed. 3. Soldering Preheat according to the following condi- tions. Soldering should be done at 250°C 482°F within 5 s. Temperature 100°C 212°F or less Time Within 1 minute *Value of chucking pressure is shown by the value of weight pressed on the portion (4 mm .157 inch dia.). For Cautions for Use, see Relay Technical Information (Page 48 to 76). 9/1/2000 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. Go To Online Catalog