RP0402

RP-SERIES YAGEO | Alldatasheet

Document overview

• PDF pages: 9

Technical content

0.1% TO 1%, TC25 TO TC50 sizes 0402/0603/0805/1206 RoHS compliant Product specification – July 25, 2022 V.0

Chip Resistor Surface Mount Product specification SERIES RP 0402 to 1206 Jul. 25, 2022 V.0 www.yageo.com ORDERING INFORMATION - GLOBAL PART NUMBER Part num ber is identified by the serie s name , size, tolerance, packaging type , temperature coefficient, t aping reel and resistance value. SCOPE This specification describes RP0402 to RP1206 high precision-high stability chip resistors made by thin film process.

APPLICATIONS

⚫ Automotive electronics ⚫ Industrial and medical equipment ⚫ Test and measuring equipment ⚫ Telecom munications

FEATURES

⚫ AEC-Q200 qualified ⚫ Total lead free without RoHS exemption ⚫ Halogen free epoxy ⚫ Superior resistance against sulfur containing atmosphere ⚫ Moisture sensitivity level: MSL 1 ⚫ Reducing environmentally hazardous wastes ⚫ High component and equip ment reliability ⚫ Non-forbidden materials used in products/production ORDERING EXAMPLE The order ing code of a RP0402 chip resistor, TC 25 value 56Ω with ± 0.5% tolerance, supplied in 7 -inch tape reel is: RP0402DRD0756RL. NOTE 1. All our Rchip products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process". 2. On customized label, "LFP" or specific symbol can be printed. GLOBAL PART NUMBER RP XXXX X X X XX XXXXX L (1) SIZE 0402 / 0603 / 0805 / 1206 (2) TOLERANCE B = ± 0.1% C = ± 0.25% D = ± 0.5% F = ± 1% (3) PACKAGING TYPE R = Paper taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE D = ± 25 ppm/°C E = ± 50 ppm/°C (5) TAPING REEL 07 = 7 inch dia. Reel (6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point Example: 100R = 100Ω 1K = 1,000Ω (7) DEFAULT CODE Letter L is the system default code for ordering only. (NOTE)

Chip Resistor Surface Mount Product specification SERIES RP 0402 to 1206 Jul. 25, 2022 V.0 www.yageo.com MARKING RP0402 No marking RP0603 E-96 series: including val ues 10/11/13/15/20/75 of E -24 series, 3 digits E-24 series: exception values 10/11/13/15/20/75 of E -24 series, one short bar under marking letter RP0805 / RP1206 Both E-24 and E -96 serie s: 4 digits First three digits for significant figure and 4th digit for number of zeros NOTE For further marking information, please see special data sheet “Chip resistors marking ”. Fig. 4 Value = 10 KΩ YNSC004 Fig. 1 ynsc007 CONSTRUCTION The resistors are constructed ou t of a high grade ceramic body. Internal metal electrodes are added at each end connected by a resistive layer. This resistive layer is trimmed to its nominal value and on both ends a contact is m ade which will guarantee optimum solderability. This is achi eved by ap plying several layers and for ease of soldering the outer layer consists of Ni/matte tin. Adding a special protective layer, passivation coating, on this seri es to enhance moisture r esis tanc e of the environment. protective coat marking layer resistive layer inner electrode termination (Ni /matte tin) ceramic substrate H YNSC064 W L Fig. 5 Chip resistor outl ines Fig. 2 Value = 12.4 Ω Fig. 3 Value = 56 KΩ ynsc003 563 OOUUTTLLIINNEESS

Chip Resistor Surface Mount Product specification SERIES RP 0402 to 1206 Jul. 25, 2022 V.0 www.yageo.com

ELECTRICAL CHARACTERISTICS

Max. Working Voltage Max. Overload Voltage Resistance Range (E-24/E-96 series)(Ω) & Tolerance(1) T.C.R. (ppm/°C)(2) ±0.1% (B) ±0.25% (C) ±0.5% (D) ±1% (F) RP0402 –55 °C to +155 °C 1/16W 50 V 100 V ± 50 (E) 10 ≤ R ≤ 240K ± 25 (D) 10 ≤ R ≤ 240K RP0603 1/10W 75V 150 V ± 50 (E) 10 ≤ R ≤ 910K ± 25 (D) 10 ≤ R ≤ 910K RP0805 1/8W 150 V 300 V ± 50 (E) 10 ≤ R ≤ 1M5 ± 25 (D) 10 ≤ R ≤ 1M5 RP1206 1/4W 200 V 400 V ± 50 (E) 10 ≤ R ≤ 1M5 ± 25 (D) 10 ≤ R ≤ 1M5 NOTE : 1. Global part number (code 7) 2. Global part number (code 9) TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) Table 1 DIMENSIONS

Chip Resistor Surface Mount Product specification SERIES RP 0402 to 1206 Jul. 25, 2022 V.0 www.yageo.com P handbook, halfpage MLB206_1 70 10055 50 Tamb( C)o (%P )rated 100 155 Fig. 6 Maximum dissipation (P max) in percentage of rated power as a fu nction of the operating ambient temperature (T amb) FUNCTIONAL DESCRIPTION OOPPEERRAATTIINNGG TTEEMMPPEERRAATTUURREE RRAANNGGEE Range: –55 °C to +155 °C PPOOWWEERR RRAATTIINNGG Each type rated power at 7 0 °C: RP0402=1/16 W RP0603=1/10 W RP0805=1/8 W RP1206=1/4 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V = )PxR( Or max. working voltage whichever is less Where V=Continuous rated DC or AC (rms) working voltage (v) P=Rated power R=Resistance value (Ω) FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors moun ting”. RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE PT040

100 MΩ TO 910 MΩ

100 mΩ to 910 mΩ ± 200 ppm/°C PT060 ± 200 ppm/°C PT080 ± 200 ppm/°C PT120 6 100 mΩ > 100 mΩ PT201 ± 100 ppm/°C ± 75 ppm/°C PT251 ± 100 ppm/°C ± 75 ppm/°C PRODUCT TYPE PATKING STYLE REEL DIMENSION QUANTITY PER REEL RP0402 Paper taping reel 7" (178 mm) 10,000 Units RP0603 Paper taping reel 7" (178 mm) 5,000 Units RP0805 Paper taping reel 7" (178 mm) 5,000 Units RP1206 Paper taping reel 7" (178 mm) 5,000 Units NOTE: for paper tape and reel specification/dimensions, please see the special data sheet “packing” document. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity

Chip Resistor Surface Mount Product specification SERIES RP 0402 to 1206 Jul. 25, 2022 V.0 www.yageo.com TEST TEST METHOD PROCEDURE REQUIREMENTS Short Time Overload IEC60115-1 4.13 2.5 times of rated voltage or maximum overload voltage, the less of the above, for 5 sec at room temperature ± (0.05%+0.05Ω) High Temperature Exposure AEC-Q200 Test 3 MIL-STD-202 Method 108 1,000 hours at Tamb = 155 °C, unpowered ± (0.3%+0.05Ω) Moisture Resistance AEC-Q200 Test 6 MIL-STD-202 Method 106 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d. with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts ± (0.1%+0.05Ω) Biased Humidity AEC-Q200 Test 7 MIL-STD-202 Method 103 1,000 hours; 85 °C / 85% RH 10% of operating power Measurement at 24± 4 hours after test conclusion ± (0.1%+0.05Ω) Life AEC-Q200 Test 8 MIL-STD-202 Method 108 1,000 hours at 70± 5 °C, RCWV applied for 1.5 hours on, 0.5 hour off, still air required ± (0.1%+0.05Ω) Resistance to Soldering Heat AEC-Q200 Test 15 MIL-STD-202 Method 210 Condition B, no pre-heat of samples Lead-free solder, 260± 5 °C, 10± 1 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol ± (0.05%+0.05Ω) Thermal Shock AEC-Q200 Test 16 MIL-STD-202 Method 107 -55/+125 °C Number of cycles is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air ± (0.1%+0.05Ω) No visible damage Solderability - Wetting AEC-Q200 Test 18 J-STD-002 Electrical Test not required Magnification 50X SMD conditions: (a) Method B, aging 4 hours at 155 °C dry heat, dipping at 235± 3 °C for 5± 0.5 seconds. (b) Method B, steam aging 8 hours, dipping at 215± 3 °C for 5± 0.5 seconds. (c) Method D, steam aging 8 hours, dipping at 260± 3 °C for 7± 0.5 seconds Well tinned (>95% covered) No visible damage Table 4 Test condition, procedure and requirements TESTS AND REQUIREMENTS

Chip Resistor Surface Mount Product specification SERIES RP 0402 to 1206 Jul. 25, 2022 V.0 www.yageo.com TEST TEST METHOD PROCEDURE REQUIREMENTS Board Flex / Bending AEC-Q200 Test 21 AEC-Q200-005 Chips mounted on a 90mm glass epoxy resin PCB (FR4) Bending for 0402: 5 mm 0603/0805: 3 mm 1206: 2mm Holding time: minimum 60 second ± (0.1%+0.05Ω) Temperature Coefficient of Resistance (T.C.R.) IEC 60115-1 4.8 At +25/–55 °C and +25/+125°C Formula: T.C.R= )1t2t −R1( R1-R2 × 106(ppm/°C) Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Refer to table 2 Flower of Sulfur ASTM-B-809-95* * Modified Sulfur 750 hours, 105°C, unpowered. ± (2.0%+0.05Ω)

Chip Resistor Surface Mount Product specification SERIES RP 0402 to 1206 Jul. 25, 2022 V.0 www.yageo.com

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 0 Jul. 25, 2022 - - First issue of this specification

Chip Resistor Surface Mount Product specification SERIES RP 0402 to 1206 Jul. 25, 2022 V.0 www.yageo.com LEGAL DISCLAIMER YAGEO , its distributors and agen ts (collectively, “ YAGEO ”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contain ed in any product related information, including but not limited to product specific ations, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notic e. YAGE O makes n o representation, warranty, and/or guar antee about the fitness of its produ cts for any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, YAGEO disclaims (i) any and all liabilit y arisin g out of the application or use of any YAGEO product, (ii) any and all liability, in cluding without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non-infr ingement and merchantability. YAGEO statements regarding the suitability of products for certain types of applications are based on YAGEO ’s knowledge of typical operating conditions for such types of applications in a generic nature. Suc h statem ents are neither binding statements of YAGEO nor intended to constitute any warranty concerning the suitability for a specific custom er application or use. They are intended for use only by customers with requisite knowledge and experience for dete rmining whether YAGEO products are the correct products for their application or use. In add ition, unpredicatable and isolated cases of produ ct failure may still occur, therefore, customer application or use of YAGEO products which requires higher degree o f reliab ility or safety, shall employ additional protect ive safeguard measures to ensure tha t product failure would not result in personal injury or property damage. YAGEO products are not designed for application or use in medical, life -saving, or life -sustaini ng device s or for any other application or use i n which the failure of YAGEO product s could result in personal injury or death. Custo mers using or selling YAGEO products not expressly indicated for above -mentioned purposes shall do so at their own risk and agree to fully indemnify YAGEO and hold YAGEO harmless. Information provided here is intend ed to indicate product specifications on ly. YAGEO reserves all the rights for revising this content without further notification, as long as products are u nchanged . Any pro duct change will be announced by PCN.