RMV

RMV RFE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

RFE International, Inc. offers a wide range of chip resistors to meet your application requirements. They are made with metal glazed thick film on a high purity ceramic substrate which is overcoated for stability and protection. DIMENSIONS D H L C W Glass Passivation Page 1 of 4 PART NUMBER EXAMPLE RESISTANCE CODE ELECTRICAL CHARACTERISTICS & RESISTANCE RANGE

• Standard Series See RM Series
• Anti-Sulfur Thick Film see RMS Series
• High Power Thick Film see RMH Series
• Anti-Sulfur High Power see RMP Series
• Thin Film see RMT Series
• Fusible Resistors see RMF Series
• Thick Film Array Chip see RCN Series
• Metal Array Low-Resistance see LR Series RMV 10 R - 10K - J Q Size Code Series Taped & Reeled Tolerance Code Resistance Code SURFACE MOUNT RESISTOR RoHS RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com Ohms 1.0 100 1.5K 15K 1.0 Meg Code 1R0 100R 1K5 15K 1M0 RMV Series: Anti-Surge SMD Resistor 1 ~ 1MΩ SURGE PERFORMANCE CURVE L W H C D Size Code Max. Dimension (mm) RMV06 (0603) 0.10W 50V 100V ±200 1Ω ~ 9.9Ω RMV10 (0805) 0.25W 150V 300V ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ RMV12 (1206) 0.50W 200V 400V ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ RMV25 (1210) 0.50W 200V 400V ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ RMV1W (2010) 1.0W 200V 400V ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ RMV2W (2512) 2.0W 300V 600V ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ Resistance RangeT.C.R. (PPM/°C)Code Size Rated Power at 70°C Max. Working Voltage Max. Overload Voltage – – Size 2512 2010 1210 1206 0805 0603 1000 100 Peak Power (W) Surge Duration (Sec) C2SM01 2017.12.21 Blank = Standard Q = AEC-Q200

PERORMANCE CHARACTERISTICS Page 2 of 4 Power Derating Curve Power rating or current rating is in the case based on continuous full-load at ambient temperature of 70ºC. For operation at ambient temperature in excess of 70ºC, the load should be derated in accordance with figure of derating Curve. Voltage Rating or Current Rating Operation and Storage Temperature Soldering Profile 100 0-55 0 20 40 60 70 80 100 120 140 160 155°C Operating Temperature Range -55°C to +155°C Ambient Temperature (°) Power Ratio (%) Resistance Range: >1Ω Rated Voltage: The resistor shall have a DC continuous working voltage or a RMS AC continuous working voltage at commercial-line frequency and wave form corresponding to the power rating, as determined formula as follows: E = Rated Voltage (V) P = Power Rating (W) R = Nominal Resistance (Ω) E = √P x R 250 200 150 100 Peak: 250 ºC+5 230ºC or Higher Pre Heating Zone 180ºC 150ºC 90 ± 30 s 30 ± 10 s Soldering Zone Heating Time RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com SURFACE MOUNT RESISTOR RoHS RMV Series: Anti-Surge SMD Resistor 1 ~ 1MΩ CONTINUOUS PULSE POWER CURVE (TYPICAL) 10,000 1,000 100 0.0001 0.001 0.01 0.1 1 Pulse Power (Watts) Pulse Duration Time (Sec.) Type Min Max Operation Temperature -55°C 70°C Storage Temperature 20°C 30°C Storage Humidity 30% 70°C Size 2512 2010 1210 1206 0805 0603 The typical continuous load numbers were obtained by repetitive application of rectangular pulses. The pulse period was set to the rated power rating of the resistor 70°C. The acceptance level was 1% from initial value. C2SM01 2017.12.21

TEST PROCEDURES & REQUIREMENTS Page 3 of 4 250 200 150 100 Peak: 250 ºC+5 230ºC or Higher Pre Heating Zone 180ºC 150ºC 90 + 30 s 30 + 10 s Soldering Zone Heating Time Test Item Test Method Procedure Requirements JIS C 5201-1 Clause 4.8 -55°C ~ +155°C, 20°C is the reference temperature Refer to Ratings IR Reflow Sony SS-00254 Leaching Sony SS-00254-9 260 ±5°C for 30 seconds > 95% Coverage Soldering Heat Electric Iron Sony SS-00254-5 Max Overload Voltage for 1 min. ≥ 10G ±1: ±(1.0%+0.05Ω) ±5: ±(2.0%+0.1Ω) General: 2.5 times RCWV or Max. Overload voltage for 5 seconds High Power: 2.5 times RCWV or Max. Overload voltage for 2 seconds JIS C 5201-1 Clause 4.13 Temperature Coefficient of Resistance (T.C.R.) Short Time Overload ±1: ±(1.0%+0.05Ω) ±5: ±(2.0%+0.1Ω) 260 ±5°C for 10 seconds JIS C 5201-1 Clause 4.18 ±1: ±(0.5%+0.05Ω) ±5: ±(1.0%+0.05Ω) -55°C ~ +155°C, 5 cycles 0.1% 0.5% 1% ' ' ±(0.5%+0.05Ω) 2% 5% ' ±(1.0%+0.1Ω) JIS C 5201-1 Clause 4.19 Temperature Cycling Preheating termperature: 350 ± 5°C Electric Iron preheating time: 3 +1/-0 sec. ±1: ±(0.5%+0.05Ω) ±5: ±(1.0%+0.05Ω) 0.1% 0.5% 1% ' ' ±(0.5%+0.05Ω) 2% 5% ' ±( .0%+0.1Ω) 3 0.1% 0.5% 1% ' ' ±( %+0.05Ω)1.0 2% 5% ' ±( %+0.1Ω) 3.0 ±1: ±(0.5%+0.05Ω) ±5: ±(1.0%+0.05Ω) ±1: ±(1.0%+0.05Ω) ±5: ±(1.0%+0.05Ω) The tested resistor be immersed into isopropyl alcoho of 20~25°C for 60 seconds. Then the resistor is left in the room for 48 hours. JIS C 5201-1 Clause 4.29 Resistance to Solvent JIS C 5201-1 Clause 4.24 Load Life in Humidity 40 ± 2°C, 90~95% R.H. or Max. working voltage for 1000 hours with 1.5 hrs “ON” and 0.5hr “OFF”. 70 ± 2°C, or Max. working voltage for 1000 hours with 1.5 hrs “ON” and 0.5hr “OFF”. JIS C 5201-1 Clause 4.25 Load Life (Endurance) Bending once for 5 seconds D: RM Series 0402 ' 0603 ' 0805 = 5mm RM Series 1206 ' 1210 ' 1812 = 3mm RM Series 1218 ' 2010 ' 2512 ' 2030 = 2mm JIS C 5201-1 Clause 4.33 Terminal Bending Strength JIS C 5201-1 Clause 4.6 Insulation Resistance RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com SURFACE MOUNT RESISTOR RoHS RMV Series: Anti-Surge SMD Resistor 1 ~ 1MΩ C2SM01 2017.12.21

PACKAGE & DIMENSION (mm) Page 4 of 4 TAPING SPECIFICATION Paper Type (P= 2.0 ± 0.1) Embossed Type (P= 4.0 ± 0.1) (2W.P= 8.0 ± 0.2) RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com SURFACE MOUNT RESISTOR RoHS RMV Series: Anti-Surge SMD Resistor 1 ~ 1MΩ Size A ΦB ΦC ΦD W ΦM RMV1W (2010) RMV2W (2512) Package Qty Size A B W E F G H T ØD Size A B W E F G H T ØD ØD1 T1 C2SM01 2017.12.21