RMTJ40BD SCHNEIDER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Harmony Analog, Converter for thermocouples, Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 141.00 USD Main Range of product Harmony Analog Product or component type Converter for thermocouples Analogue output type Current 0...20 mA <= 500 Ohm Current 4...20 mA <= 500 Ohm Voltage 0...10 V >= 100 kOhm Complementary Protection type Overvoltage protection on output (+/- 30 V) Reverse polarity protection on output Short-circuit protection on output Abnormal analogue output voltage -15...-11 V no input or input wire broken 11...15 V no input or input wire broken Abnormal analogue output current -30…0 mA no input or input wire broken [Us] rated supply voltage 24 V DC +/- 20 %, non isolated Current consumption <= 60 mA current output Local signalling for power ON LED (green) Measurement error +/- 10 % of full scale 20 °C electromagnetic interference of 10 V/m) +/- 1 % of full scale 20 °C Repeat accuracy +/- 0.25 % full scale 20 °C +/- 0.8 % full scale 60 °C Temperature coefficient 200 ppm/°C Cold junction compensation Built-in between 0 and 60 °C Clamping connection capacity 2 x 1.5 mm² 1 x 2.5 mm² Marking CE Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications * Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price. Jul 19, 2021

Surge withstand 0.5 kV 1.2/50 µs IEC 61000-4-5 [Ui] rated insulation voltage 2 kV Fixing mode By screws mounting plate) Clip-on 35 mm symmetrical DIN rail) Safety reliability data B10d = 45447 MTTFd = 49.2 years Net Weight 0.26 lb(US) (0.12 kg) Environment Standards IEC 60947-1 IEC 60584-1 Product certifications CSA GL UL IP degree of protection IP20 terminal block) IP50 housing) Fire resistance 1562 °F (850 °C) IEC 60695-2-1 1562 °F (850 °C) UL Shock resistance 50 gn 11 ms IEC 60068-2-27 Vibration resistance 5 gn 10…100 Hz)IEC 60068-2-6 Resistance to electrostatic discharge 6 kV in contact)IEC 61000-4-2 level 3 8 kV in air)IEC 61000-4-2 level 3 Resistance to fast transients 1 kV IEC 61000-4-4 on input-output) 2 kV IEC 61000-4-4 on power supply) Disturbance radiated/conducted CISPR 11 CISPR 22 group 1 - class B Ambient air temperature for storage -40…185 °F (-40…85 °C) Ambient air temperature for operation 32…122 °F (0…50 °C) mounting side by side 32…140 °F (0…60 °C) 2 cm spacing Pollution degree 2 conforming to IEC 60664-1 Ordering and shipping details Category 22375 - INTERFACE MODULE(ABA,R,S) Discount Schedule CP2 GTIN 03389110109023 Nbr. of units in pkg. 1 Package weight(Lbs) 3.56 oz (101 g) Returnability No Country of origin ID Packing Units Unit Type of Package 1 PCE Package 1 Height 1.06 in (2.7 cm) Package 1 width 3.23 in (8.2 cm) Package 1 Length 3.35 in (8.5 cm) Offer Sustainability Sustainable offer status Green Premium product California proposition 65 WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov REACh Regulation REACh Declaration EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Mercury free Yes

RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information WEEE The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty 18 months

Analog Interface (Converter) Dimensions (1) Terminal block AB1TP435U or AB1RRNTP435U2

Mounting on Rails AM1••••• Panel Mounting

The input, output and power supply lines must be kept away from the power cables to avoid effects due to induced interference. The input and output cables must be shielded as indicated in the diagram and must be kept away from each other.