RMP10

RMP RFE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

The RMP Series is a higher power (high wattage) version of the standard RM Series Thick Film SMD Resistor. The RMP Series SMD Resistor is made with a specially formulated substrate and with an advanced process used to deposit the film. As a result, power ratings surpass standard series, and they are ANTI- SULFUR. These resistors are AEC-Q200 qualified and are suitable for all applications (automotive, lighting, power, etc). C2BB07 2014.01.13 DIMENSIONS D H L C W Glass Passivation PART NUMBER EXAMPLE RMP 10 R - 10K - J Size Code Series Taped & Reeled Tolerance Code Resistance Code RESISTANCE CODE SIZE CODE & RESISTANCE RANGE Page 1 of 4 RoHS Ohms 0.0 100 1.5K 15K 1.5 Meg Code 0R0 100R 1K5 15K 1M5 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com RMP06 (0603) RMP10 (0805) RMP12 (1206) RMP25 (1210) RMP50 (2010) RMP50S (1812) RMP2W (2512) RMP2WS (1218) L W H C DSize Code Max. Dimension (mm) 1.60±0.20 2.00±0.20 3.05±0.10 3.05±0.10 4.50±0.10 5.00±0.20 3.10±0.10 4.60±0.10 3.00±0.10 2.50±0.20 2.50±0.20 1.60±0.20 1.25±0.15 0.50±0.15 0.55±0.15 0.55±0.15 0.55±0.10 0.55±0.05 0.55±0.10 0.60±0.200.60±0.20 0.50±0.20 0.50±0.20 0.50±0.20 0.40±0.20 RMP06 RMP10 RMP12 RMP25 RMP50 RMP50S RMP2W RMP2WS (0603) (0805) (1206) (1210) (2010) (1812) (2512) (1218) Resistance Range Code Size Rated Power at 70°C Max. Working Voltage Max. Overload Voltage T.C.R. (PPM/°C) B (±0.1%) 0.125W 0.25W 0.50W 0.66W 1.0W 2.0W 2.0W 1.0W 50V 100V 300V150V 400V 400V 200V 200V 200V 200V 400V 400V 500V 500V 250V 250V ±200 ±400 ±100 ±200 ±400 ±100 ±200 ±400 ±100 ±200 ±400 ±100 ±200 ±400 ±100 ±200 ±400 ±100 ±200 ±400 ±100 ±200 ±400 ±100 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 1MΩ 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ 1Ω ~ 9.9Ω 10Ω ~ 10MΩ

• Basic Thick Film Resistors see RM Series
• High Power Thick Film see RMH Series
• Anti-Sulfur Thick Film Resistors see RMS Series
• Thin Film Resistor see RMT series
• Fusible Resistors see RMF Series
• Thick Film Array Chip see RCN Series
• Metal Array Low-Resistance see LR Series SMD RESISTOR ** ANTI-SULFUR RMP Series: Higher Power, Thick Film

RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com RoHS PERORMANCE CHARACTERISTICS Power Derating Curve Power rating or current rating is in the case based on continuous full-load at ambient temperature of 70ºC. For operation at ambient temperature in excess of 70ºC, the load should be derated in accordance with figure of derating Curve. Voltage Rating or Current Rating Operation and Storage Temperature Operation temperature MIN MAX Storage temperature Storage humidity -55ºC 20ºC 30% 30ºC 70ºC 70ºC Soldering Profile 100 0-55 0 20 40 60 70 80 100 120 140 160 155°C Operating Temperature Range -55°C to +155°C Ambient Temperature (°) Power Ratio (%) Resistance Range: >1Ω Rated Voltage: The resistor shall have a DC continuous working voltage or a RMS AC continuous working voltage at commercial-line frequency and wave form corresponding to the power rating, as determined formula as follows: E = Rated Voltage (V) P = Power Rating (W) R = Nominal Resistance (Ω) E = √P x R 250 200 150 100 Peak: 250 ºC+5 230ºC or Higher Pre Heating Zone 180ºC 150ºC 90 ± 30 s 30 ± 10 s Soldering Zone Heating Time SMD RESISTOR ** ANTI-SULFUR RMP Series: Higher Power, Thick Film C2BB07 2012.12.20

RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com TEST PROCEDURES & REQUIREMENTS 250 200 150 100 Peak: 250 ºC+5 230ºC or Higher Pre Heating Zone 180ºC 150ºC 90 + 30 s 30 + 10 s Soldering Zone Heating Time Test Item Test Method Procedure Requirements JIS C 5201-1 Clause 4.8 -55°C ~ +155°C, 20°C is the reference temperature Refer to Ratings IR Reflow Sony SS-00254 Leaching Sony SS-00254-9 260 ±5°C for 30 seconds > 95% Coverage Soldering Heat Electric Iron Sony SS-00254-5 Max Overload Voltage for 1 min. ≥ 10G ±1: ±(1.0%+0.05Ω) ±5: ±(2.0%+0.1Ω) General: 2.5 times RCWV or Max. Overload voltage for 5 seconds High Power: 2.5 times RCWV or Max. Overload voltage for 2 seconds JIS C 5201-1 Clause 4.13 Temperature Coefficient of Resistance (T.C.R.) Short Time Overload ±1: ±(1.0%+0.05Ω) ±5: ±(2.0%+0.1Ω) 260 ±5°C for 10 seconds JIS C 5201-1 Clause 4.18 ±1: ±(0.5%+0.05Ω) ±5: ±(1.0%+0.05Ω) -55°C ~ +155°C, 5 cycles 0.1% 0.5% 1% ' ' ±(0.5%+0.05Ω) 2% 5% ' ±(1.0%+0.1Ω) JIS C 5201-1 Clause 4.19 Temperature Cycling Preheating termperature: 350 ± 5°C Electric Iron preheating time: 3 +1/-0 sec. ±1: ±(0.5%+0.05Ω) ±5: ±(1.0%+0.05Ω) 0.1% 0.5% 1% ' ' ±(0.5%+0.05Ω) 2% 5% ' ±( .0%+0.1Ω) 3 0.1% 0.5% 1% ' ' ±( %+0.05Ω)1.0 2% 5% ' ±( %+0.1Ω) 3.0 ±1: ±(0.5%+0.05Ω) ±5: ±(1.0%+0.05Ω) ±1: ±(1.0%+0.05Ω) ±5: ±(1.0%+0.05Ω) The tested resistor be immersed into isopropyl alcoho of 20~25°C for 60 seconds. Then the resistor is left in the room for 48 hours. JIS C 5201-1 Clause 4.29 Resistance to Solvent JIS C 5201-1 Clause 4.24 Load Life in Humidity 40 ± 2°C, 90~95% R.H. or Max. working voltage for 1000 hours with 1.5 hrs “ON” and 0.5hr “OFF”. 70 ± 2°C, or Max. working voltage for 1000 hours with 1.5 hrs “ON” and 0.5hr “OFF”. JIS C 5201-1 Clause 4.25 Load Life (Endurance) Bending once for 5 seconds D: RMP Series 0402 ' 0603 ' 0805 = 5mm RMP Series 1206 ' 1210 ' 1812 = 3mm RMP Series 1218 ' 2010 ' 2512 ' 2030 = 2mm JIS C 5201-1 Clause 4.33 Terminal Bending Strength JIS C 5201-1 Clause 4.6 Insulation Resistance SMD RESISTOR ** ANTI-SULFUR RMP Series: Higher Power, Thick Film C2BB07 2014.01.13

SMD RESISTOR ** ANTI-SULFUR RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com PACKAGE & DIMENSION (mm) TAPING SPECIFICATION Unit:mm Unit:mm Unit: mm Paper Type (P= 2.0 ± 0.1) Embossed Type (P= 4.0 ± 0.1) Type A ΦB ΦC ΦD W ΦM RMP50 (2010) RMP50S (1812) RMP2W (2512) RMP2WS (1218) Size Type A B W E F G H T ΦD Type A B W E F G H T ΦD ΦD1 T1 RMP Series: Higher Power, Thick Film C2BB07 2014.01.13