RMG50DTD0R1 TOKEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Electrically Isolated Case. - TO-220 Style Power Package. - Low ohm value, non-inductance design - Molded Case for Protection and Easy to Mount. - 50 Watt at 25°C Case Temperature Heat Sink Mounted. TOKEN Version 2010
RMG50 To-Style Power Resistors Dimensions (Unit: mm) Electrical Characteristics Specifications Power Derating Curve W H T B T2 C D Type W H T T1 T2 B B1 C D D1 Resistance Range Resistance Tolerance TCR(PPM/°C) 0.05Ω~1Ω ±5.00% ±10.0% - 2Ω~5Ω ±1.00% ±5.00% ±10.0% ±200 5Ω~10Ω ±1.00% ±5.00% ±10.0% ±100 ±200 11Ω~10KΩ ±0.50% ±1.00% ±5.00% ±10.0% ±50 ±100 ±200 Note: Operating Voltage:350V Max. Dielectric Strength: 1800VAC Insulation Resistance: 10GΩmin. Working Temperature Range:-65°C to +150°C Resistance Value < 1Ω is Available Case Temperature (°C) Rated Power (%) 100 25 50 75 1501251000 175 Derating Curve TOKEN Version 2010
RMG50 To-Style Power Resistors Environmental Characteristics How to Order J PRMG D 10R Part Number Power Rating Resistance Code Resistance 0R1 0.1Ω 10R 10Ω 1K 1KΩ 10K 10KΩ Resistance Tolerance (%) Code Resistance Tolerance D ±0.5% F ±1% G ±2% J ±5% K ±10% Package Code Package T Tube P Bulk TCR (PPM/°C) Code TCR D ±50PPM/°C E ±100PPM/°C F ±200PPM/°C - No specified Back to 1st Page - TO-220 Power Resistors (RMG50) Test Item Specification Test Method Temperature Coefficient of Resistance 10Ω and above, ±50ppm/°C 1Ω and 10Ω, (±100ppm)/°C Referenced to 25°C, ΔR taken at +105°C Short Time Overload Δ R±0.3% 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds. Load Life Δ R±1.0% MIL-R-39009,2,000 hours at rated power. Humidity (Steady State) Δ R±0.5% MIL-STD-202F, Method 103B 40°C, 90~95%RH, RCWV 1.5hours ON, 0.5hours OFF. total 1000~1048 hours. Thermal Shock Δ R±0.3% MIL-STD-202, Method 107G. -65°C~150°C,100 cycle Terminal Strength Δ R±0.2% MIL-STD-202, Method 211, Cond.A(Pull Test) 2.4N. Vibration, High Frequency Δ R±0.2% MIL-STD-202, Method 204, Cond.D. Note: 1.Lead Material: Tinned Copper. Maximum Torque: 0.9 Nm. 2.Without a Heat Sink, When in Free Air at 25°C, the RMG50 is Rated for 3W. 3.The Case Temperature is to be used for the Definition of the Applied Power Limit. 4. The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. 5.Thermal Grease Should be Applied Properly. TOKEN Version 2010