RMG35DTD0R1 TOKEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Single Screw Mounting to Heat Sink. - Molded Case for Protection and Easy to Mount. - 35 Watt at 25°C Case Temperature Heat Sink Mounted. - TO-220 Style Power Package, Isolated Case, Non Inductive. - Low Thermal Resistance to Heat Sink at Rth < 4.28°C/W. TOKEN
RMG35 Power TO-Style Resistors Dimensions (Unit: mm) Electrical Characteristics Specifications Power Derating Curve W H T B T1 T2 C D R G M N Type W H T T1 T2 B B1 C D D1 G R M N RMG35 9.91 10.41 14.50 15.00 4.06 4.82 0.55 0.70 2.05 2.52 12.70 14.70 4.00 4.83 5.33 0.70 0.86 1.17 1.37 2.85 3.05 3.55 3.75 5.85 6.35 1.20 1.40 Resistance Range Resistance Tolerance TCR(PPM/°C) ±200 ±5.00%; ±10.0% ±50 ±100 ±200 Note: Operating Voltage:350V Max. Dielectric Strength: 1800VAC. Insulation Resistance: 10GΩmin. Working Temperature Range:-65°C to +150°C . Resistance Value < 1Ω is Available Case Temperature (°C) Rated Power (%) 100 25 50 75 1501251000 175 Derating Curve TOKEN
RMG35 Power TO-Style Resistors Environmental Characteristics How to Order J PRMG D 10R Part Number Power Rating Resistance Code Resistance 0R1 0.1Ω 10R 10Ω 1K 1KΩ 10K 10KΩ Resistance Tolerance (%) Code Resistance Tolerance D ±0.5% F ±1% G ±2% J ±5% K ±10% Package Code Package T Tube P Bulk TCR (PPM/°C) Code TCR D ±50PPM/°C E ±100PPM/°C F ±200PPM/°C - No specified Back to 1st Page - TO-220 Power Resistors (RMG35) Test Item Specification Test Method Temperature Coefficient of Resistance 10Ω and above, ±50ppm/°C 1Ω and 10Ω, (±100ppm)/°C Referenced to 25°C, ΔR taken at +105°C Short Time Overload Δ R±0.3% 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds. Load Life Δ R±1.0% MIL-R-39009,2,000 hours at rated power. Humidity (Steady State) Δ R±0.5% MIL-STD-202F, Method 103B 40°C, 90~95%RH, RCWV 1.5hours ON, 0.5hours OFF. total 1000~1048 hours. Thermal Shock Δ R±0.3% MIL-STD-202, Method 107G. -65°C~150°C,100 cycle Terminal Strength Δ R±0.2% MIL-STD-202, Method 211, Cond.A(Pull Test) 2.4N. Vibration, High Frequency Δ R±0.2% MIL-STD-202, Method 204, Cond.D. Note:1.Lead Material: Tinned Copper. Maximum Torque: 0.9 Nm. 2.Without Heat Sink, When in Free Air at 25°C, the RMG35 is Rated for 2.50W. 3.The Case Temperature is to be used for the Definition of the Applied Power Limit. 4.The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. 5.Thermal Grease Should be Applied Properly. TOKEN