RMG20DTD0R1 TOKEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Molded Case for Protection and Easy to Mount. - 20 Watt at 25°C Case Temperature Heat Sink Mounted. - Isolated Case, Non Inductive, TO-220 Style Power Package.
Applications
- VHF Amplifiers, Snubber Circuits, V oltage Regulation, Load Resistor for Pulse Generators, High Speed Switching Power Supplies. TOKEN
RMG20 TO-220 Power Resistors Dimensions (Unit: mm) Electrical Characteristics Specifications W H T B C D Type W H T T1 T2 B B1 C D D1 Resistance Range Resistance Tolerance TCR(PPM/°C) 0.05Ω~1Ω ±5.00% ±10.0% - 2Ω~5Ω ±1.00% ±5.00% ±10.0% ±200 5Ω~10Ω ±1.00% ±5.00% ±10.0% ±100 ±200 11Ω~10KΩ ±0.50% ±1.00% ±5.00% ±10.0% ±50 ±100 ±200 Note: Operating Voltage:350V Max. Dielectric Strength: 1800VAC. Insulation Resistance: 10GΩmin. Working Temperature Range:-65°C to +150°C. Resistance Value < 1Ω is Available Power Derating Curve Case Temperature (°C) Rated Power (%) 100 20 50 75 1501251000 175 Derating Curve TOKEN
Environmental Characteristics Test Item Specification Test Method Temperature Coefficient of Resistance 10Ω and above, ±50ppm/°C 1Ω and 10Ω, (±100ppm)/°C Referenced to 25°C, ΔR taken at +105°C Short Time Overload Δ R±0.3% 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds. Load Life Δ R±1.0% MIL-R-39009,2,000 hours at rated power. Humidity (Steady State) Δ R±0.5% MIL-STD-202F, Method 103B 40°C, 90~95%RH, RCWV 1.5hours ON, 0.5hours OFF. total 1000~1048 hours. Thermal Shock Δ R±0.3% MIL-STD-202, Method 107G. -65°C~150°C,100 cycle Terminal Strength Δ R±0.2% MIL-STD-202, Method 211, Cond.A(Pull Test) 2.4N. Vibration, High Frequency Δ R±0.2% MIL-STD-202, Method 204, Cond.D. Note:1.Lead Material: Tinned Copper. 2.Without a Heat Sink, when in Free Air at 25°C, the RMG20 is Rated for 2.25W. 3.The Case Temperature is to be used for the Definition of the Applied Power Limit. 4.The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. 5.Thermal Grease Should be Applied Properly. How to Order J PRMG D 10R Part Number: TO-220 Power Resistors Power Rating Resistance Code Resistance 0R1 0.1Ω 10R 10Ω 1K 1KΩ 10K 10KΩ Resistance Tolerance Code Resistance Tolerance D ±0.5% F ±1% G ±2% J ±5% K ±10% Packaging Code Packaging T Tube P Bulk TCR Code TCR D ±50PPM/°C E ±100PPM/°C F ±200PPM/°C - No specified Back to 1st Page - TO-220 Power Resistors (RMG20) TOKEN