RMG100DTD0R1 TOKEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- TO-247 Style Power Package. - Single M3 Screw Mounting to Heat Sink. - Molded Case for Protection and Easy to Mount. - Non-Inductive Design, Electrically Isolated Case. - 100 Watts at 25°C Case Temperature Heat Sink Mounted. TOKEN
RMG100 TO-247 Power Resistors Dimensions (Unit: mm) Electrical Characteristics Specifications Power Derating Curve W H T B T1 T2 C D R G Type W H T T1 T2 B B1 C D D1 G R RMG100 15.49 16.01 20.44 20.96 4.69 5.21 0.55 1.07 2.15 2.67 13.21 15.75 2.03 3.55 9.90 10.42 1.42 1.62 3.45 3.81 5.07 5.59 3.53 3.73 Resistance Range Resistance Tolerance TCR(PPM/°C) 0.1Ω~1Ω ±5% ±10% - >1Ω~3Ω ±1% ±300 >3Ω~10Ω ±1% ±5% ±10% ±100 ±200 >10Ω~10KΩ ±1% ±5% ±10% ±50 ±100 ±200 Note: Operating Voltage: 350V Max. Dielectric Strength: 1800V AC. Insulation Resistance: 10GΩ min. Working Temperature Range: -65°C to +175°C. Rated Power (%) 100 25 50 75 1501251000 175 Derating Curve TOKEN
RMG100 TO-247 Power Resistors Environmental Characteristics How to Order 100 J PRMG D 10R Part Number Power Rating Resistance Code Resistance 0R1 0.1Ω 10R 10Ω 1K 1KΩ 10K 10KΩ Resistance Tolerance (%) Code Resistance Tolerance D ±0.5% F ±1% G ±2% J ±5% K ±10% Package Code Package T Tube P Bulk TCR (PPM/°C) Code TCR D ±50PPM/°C E ±100PPM/°C F ±200PPM/°C G ±300PPM/°C - No specified Back to 1st Page - TO-220 Power Resistors (RMG100) Test Item Specification Test Method Temperature Coefficient of Resistance As spec. Referenced to 25°C, ΔR taken at +105°C Short Time Overload ΔR±0.5% 1.5 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds. Dielectric strength ΔR±0.15% MIL-STD-202F Method 301(1800V AC, 60s) Load Life ΔR±1.0% MIL-PRF-39009D, 4.8.13 Rated power, 2,000 hours. Moisture resistance ΔR±0.5% -10°C~+65°C, RH>90%, cycle 240 hours. Thermal Shock ΔR±0.5% MIL-STD-202, Method 107G. -65°C~150°C,100 cycle Terminal Strength ΔR±0.2% MIL-STD-202F, Method 211, Cond. A (Pull Test) 2.4N Vibration, High Frequency ΔR±0.42% MIL-STD-202F, Method 204, Cond.D Solderability 90% min coverage MIL-STD-202F Method 208H Note:1.Lead Material: Tinned Copper. Thermal Grease Should be Applied Properly. 2.When in Free Air at 25°C, the RMG100 is Rated for 3.5W. 3.The Case Temperature is to be used for the Definition of the Applied Power Limit. 4.The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. TOKEN