RMF125 RIEDON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 Fax: (626) 284-1704 www.riedon.com Sales@Riedon.com DIMENSION (mm) TYPE POWER RATING TOL (±) L D H (min) d Max. Working Voltage Max. Overload Voltage 0.45 ±0.05 200V 400V 0.45 ±0.05 200V 400V 0.60 ±0.05 250V 500V 0.60 ±0.05 250V 500V 0.60 ±0.05 350V 700V RMFS100 1W 1%,5% 9.5 ±1 3.5 ±0.5 25 0.60 ±0.05 350V 700V RMF100 1W 1%,5% 12 ±1 4.5 ±0.5 25 0.80 ±0.05 500V 1000V RMFS200 2W 1%,5% 12 ±1 4.5 ±0.5 25 0.80 ±0.05 500V 1000V Features: Meet Performance Requirements of JSS Std. & MIL Std. Miniature Size available for space savings. Available ranges from 10 ohm to 1M ohm. Values below range available on request. Flameproof Coating Available on request. TCR available 25,50,100ppm/ °C.

Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 Fax: (626) 284-1704 www.riedon.com Sales@Riedon.com TEST PROCEDURE SPEC. Dielectric Withstanding Voltage V - Block Method, 3X Rated Voltage Duration: 1min. R = (0.25% + 0.05 ohm) Insulation Resistance V - Block Method, DC 500V Duration: 1min. > 10,000 M ohm Temp Cycling 5 cycles of -65°C, 25°C,155°C, 25°C R = (1% + 0.05 ohm) Short Time Overload 2.5 X Rated Voltage Duration: 5 seconds R = (0.25% + 0.05 ohm) Damp Heat Steady State 40°C 95% relative humidity, Duration: 56 Days R = (1% + 0.05 ohm) Load Life Rated Voltage at 70°C ambient Duration: 2000 hours R = (1% + 0.05 ohm) Robustness of Terminations Tensile: 10N Duration: 10 sec. Bending: 180°, > 3 bends Torsion: 3 rotation of 360° each Resistance to Soldering Heat Temp. 260°C ± 5°C Duration: 10 seconds R = (0.25% + 0.05 ohm) Shock (Medium Impact) 1 Km/S 2 R = (0.25% + 0.05 ohm) Vibration (High Frequency) 10 to 2000Hz: m/S 2 R = (0.25% + 0.05 ohm) Low Temp. Exposure at -65°C Duration: 2 Hrs R = (0.25% + 0.05 ohm) High Temp. Exposure at +155°C Duration: 16 Hrs. No Load Condition R = (1% + 0.05 ohm) Solderability Dip Method, Solder bath Temp. 230°C ± 5°C. Duration: 5 sec. 95% coverage Resistance to Solvent Solvent: Trichloroethylene Duration: 3 min. Marking should be legible