RMDVB1-25SS1L

MDB1-9PH001P ITT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

PCB ordering information - page 30 SERIES-INSULATOR STYLE-MATERIAL SERIES-INSULATOR STYLE-MATERIAL MDB - Screw mounting-Diallyl phthalate MDVB - Screw mounting-Polyester H - Insulated solid or stranded wire L - Uninsulated solid wire S - Solder pot to accept #26 AWG max. harness wire. No designator - No hardware - standard mounting .091 (2.31) hole diameter P - Jackpost K - Jackscrew-standard L - Jackscrew-low profile F - Float mount M - Military specification hardware, see page 13. 1 - .050 (1.27) centers 9-15-21-25-31-37-51. See page 9 P - Pin S - Socket CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION TYPE LOCKING HARDWARE (SCREW MOUNTING ONLY) TERMINATION CODE LOCKING HARDWARE MD P H 001 P (H) 001 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, Yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. TERMINATION CODE RoHS COMPLIANCE R See page 79 and 81 for additional codes www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Micro-D Plastic Shell - .050" Contact Spacing MD How to Order Microminiature Rectangular Connectors with MICRO-Pin Contacts on .050 (1.27) centers. MICRO-D microminiature rack/panel connec- tors are used in applications requiring highly reliable, extremely small, lightweight connec- tors. These connectors are available in 2 insu- lator materials, 2 mounting variations, 7 shell sizes accommodating from 9 to 51 contacts and a special arrangement of 5 micro contacts and 2 coaxials. The insulator materials listed give the MICRO-D connector wide versatility in most applications required by industry. ITT can also terminate a wide variety of stranded or solid wire directly to MICRO-D contacts, which is often desirable in high den- sity arrangements. MICRO-D connectors can also be custom har- nessed to meet any customer requirement of single or multiple connectors. Pigtail lead and harness description must be given by the cus- tomer. A typical description would be: .5" #25 AWG, gold plated copper leads or 18" of #26 yellow, Teflon-insulated, Type E wire. Shown below are various methods of termination. Consult customer service for any routine or complex harnessing of MICRO-D connectors.

• Glass-filled diallyl phthalate thermoset material used in high temperature applica- tions that is immune to cleaning solvents. It also has excellent dielectric properties. Temperature range: -65˚F to +300˚F (-55˚C to +149˚C).
• Glass-filled polyester thermoplastic that is not affected by cleaning solvents and exhibits excellent dielectric properties. Temperature range: -55˚F to +257˚F (-65˚C to +125˚C). Dimensions shown in inch (mm) Specifications and dimensions subject to change Specifications MATERIALS AND FINISHES Shell/Insulator (One Piece) MD/MDB: Glass-filled thermoset plastic MDV/MDVB: Thermoplastic ELECTRICAL DATA MECHANICAL FEATURES No of Contacts Size or Length Coupling Polarization Contact Spacing Centers Shell Styles Consult factory for availabilty. Coaxial Cable Wire Size Contact Termination - 9 to 51: (1 arrangement of 5 contacts and 2 coaxials - for screw mount only) - 7 sizes - Friction/jackscrews - Keystone-shaped shells -.050 (1.27mm) - Plug and receptacle - RG-178/U (Not available for MD clip mount) - #24 thru #32 AWG - Multi-indent crimp - Copper alloy, gold plate Contacts

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Standard Wire Termination Codes Cavity #1 black The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. #26 AWG per MIL-W-16878 Type E Teflon, stranded. Harness Type (H) Length 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) H020 H019 H026 H029 H028 H001 H038 H009 H010 H011 H013 H017 H042 H027 H016 H034 H025 H002 H003 H023 H004 H005 H006 H048 H046 H041 L61 L56 L57 L39 L58 L14 L16 L10 .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.52) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) All Yellow Color Coded* Termination Code Length #25 AWG Gold Plated Copper Solid Uninsulated Type (L) Micro-D Plastic Shell - .050" Contact Spacing MDB/MDVB With Screw Mounting Holes (Conforms to MIL-DTL-83513) MDB B B C C .304 (7.72) MAX. .204 (5.18) MAX. .185 (4.70) MAX. .100 (2.54) MAX. .285 (7.24) MAX. .375 (9.92) MAX. .100 (2.54) MAX. .110 (2.79) MAX. TWO MTG. HOLES .091 ± .003 (2.31 ± 0.08) .200 (5.08) MAX. .154 (3.91) MAX. .200 (5.08) MAX. D D F F A A E E .395 (10.03) MAX. Solder Pot Solder Pot Glass-filled Diallyl Phthalate Plastic Insulator MDVB Glass-filled Polyester Plastic Insulator R Part Number by Shell Size Add lead type and length, see Part Number Explanation. Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails. * A Max. B Max. C Max. D Max. E Max. F ±.005 Avg. Weight* ±5% (oz.) ±5% (gm.) MDB1-9P MDB1-9S MDB1-15P MDB1-15S MDB1-21P MDB1-21S MDB1-25P MDB1-25S MDB1-31P MDB1-31S MDB1-37P MDB1-37S MDB1-51P MDB1-51S MDVB1-9P MDVB1-9S MDVB1-15p MDVB1-15S MDVB1-21P MDVB1-21S MDVB1-25P MDVB1-25S MDVB1-31P MDVB1-31S MDVB1-37P MDVB1-37S MDVB1-51P MDVB1-51S .788 (20.02) .788 (20.02) .938 (23.82) .938 (23.82) 1.088 (27.64) 1.088 (27.64) 1.188 (30.18) 1.188 (30.18) 1.338 (33.98) 1.338 (33.98) 1.488 (37.80) 1.488 (37.80) 1.438 (36.52) 1.438 (36.52) .292 (7.42) .380 (9.65) .442 (11.23) .530 (13.46) .592 (15.04) .680 (17.27) .692 (17.58) .780 (19.81) .842 (21.39) .930 (23.62) .992 (25.20) 1.080 (27.43) .942 (23.93) 1.030 (26.16) .408 (10.36) .408 (10.36) .588 (14.17) .588 (14.17) .708 (17.98) .708 (17.98) .808 (20.56) .808 (20.56) .958 (24.33) .958 (24.33) 1.108 (28.14) 1.108 (28.14) 1.058 (26.87) 1.058 (26.87) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .220 (5.59) .220 (5.59) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .260 (6.60) .260 (6.60) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (38.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) .026 (0.73) .025 (0.70) .038 (1.10) .035 (1.00) .053 (1.50) .050 (1.40) .063 (1.80) .056 (1.60) .080 (2.30) .073 (2.10) .086 (2.45) .076 (2.15) .109 (3.10) .093 (2.64)

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Dimensions shown in inch (mm) Specifications and dimensions subject to change Micro-D Plastic Shell - .050" Contact Spacing MD*B-PCB MD*B-PCB connectors use standard MD*B all plastic shells and are designed for use with flex circuitry, printed circuit and multi-layer boards. They are easily mounted and soldered and provide high density/high reliability in board-to-board and board-to-cable applica- tions. While being similar to the MDM-PCB connectors, the MD*B-PCB connectors are all plastic, extremely small, and lightweight yet rugged enough for use in the most demanding applications. MD*B-PCB connectors are available in seven shell sizes with 9 to 51 contacts in the popular 90° narrow profile PCB termination, with a variety of tail lengths for varying board thickness. How to Order SERIES CONTACT ARRANGEMENT CONTACT TYPE C TERMINATION TYPE T HARDWARE H TERMINATION TAIL LENGTH T MODIFICATION CODES C (Consult Factory) M MD*B S CBR * * * * L39 RoHS COMPLIANCE R Jackpost mounting for use with locking hard- ware is also available. If the connectors shown in the catalog do not meet the requirements of your applica- tions, a special shape, size or layout using the basic all plastic shell can be made avail- able. For further technical and applications information, contact customer service. CONNECTOR SERIES MDVB, MDB CONNECTOR ARRANGEMENT 9, 15, 21, 25, 31, 51 CONTACT TYPE S = Socket P = Pin TERMINATION TYPE CBR = 90° Narrow Profile PCB Terminations HARDWARE P = Jackpost M7 = Jackposts, M635135-07 No Letter = Less Hardware TERMINATION TAIL LENGTH CODES NONE – .109 (2.77) ± 0.15 (0.38) Standard L61 – .125 (3.18) L66 – .150 (3.81) L57 – .190 (4.83) L39 – .250 (6.35) L58 – .375 (9.52)

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Micro-D Plastic Shell - .050" Contact Spacing MD*B-PCB CBR Series (90˚ Mounting Narrow Profile) LAST CAV A C B D E .109 +_ .015 (3.77 +_ 0.38) CAV. JACKPOST 2-56 UNC-2B TYP. .186 (4.72) PLUG .199 (5.05) RECEPTACLE 9-15-21-25 VIEW * FOR 31: 1.085 (27.56) MAX. FOR 37: 1.185 (30.10) MAX. FOR 51: 1.225 (31.12) MAX. .096 +_ .005 (2.44 +_ 0.31) DIA. TYP G F H G F H PCB Termination Arrangements (Viewed from bottom of connector, on PCB solder side.) Indentification number shown for plug connector, use reverse order for socket connector. .083 (2.11) .020 (0.51) .158 (4.00) .020 (0.51) .020 (0.51) .183 (4.65) .108 (2.73) .050 (1.27) .108 (2.73) .100 (2.54) TYP. .050 (1.27) TYP. .020 (0.51) .083 (2.11) .020 (0.51) .083 (2.11) .020 (0.51)

9 Contacts

15 Contacts

21 Contacts

25 Contacts

51 Contacts

37 Contacts

31 Contacts

• For jackpost locking add letter "P" or "M7". NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped. Part Number By Shell Size MD*B-9PCBR* MD*B-9SCBR* MD*B-15PCBR* MD*B-15SCBR* MD*B-21PCBR* MD*B-21SCBR* MD*B-25PCBR* MD*B-25SCBR* MD*B-31PCBR* MD*B-31SCBR* MD*B-37PCBR* MD*B-37SCBR MD*B-51PCBR* MD*B-51SCBR .788 (20.01) .788 (20.01) .938 (23.82) .938 (23.82) 1.088 (27.63) 1.088 (27.63) 1.188 (30.17) 1.188 (30.17) 1.338 (33.98) 1.338 (33.98) 1.488 (37.79) 1.488 (37.79) 1.438 (36.52) 1.438 (36.52) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) .292 (7.42) .375 (9.52) .442 (11.23) .525 (13.34) .592 (15.04) .675 (17.14) .692 (17.58) .775 (19.68) .842 (21.39) .925 (23.50) .994 (25.25) 1.075 (27.30) .942 (23.93) 1.026 (26.06) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .258 (6.55) .258 (6.55) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .177 (4.50) .258 (6.55) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .520 (13.21) .520 (13.21) .550 (13.97) .550 (13.97) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) .230 (5.84) .230 (5.84) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .150 (3.81) .150 (3.81) A Max. B ± .005 (0.13) G ± .010 (0.25) H ± .010 (0.25) C Max. D Max. E Max. F Max.

www.ittcannon.com Dimensions shown in inch (mm) Micro-D Plastic Shell - .050" Contact Spacing MDB Coaxial MDB Coaxial Series with Screw Mounting Holes MDB connectors with two coaxial and five MICRO- PINTM /MICROSOCKETTM contacts. Crimp-type coaxial contacts accommodate RG-178/U cables. A plastic insertion/extraction tool is supplied with each connec- tor assembly having removable coaxial assembly. How to Order - MDB Coaxial SERIES MDB * * S H K SERIES Micro-D Coaxial No Letter - Coaxial assembly installed and nonremovable RO - coaxial assembly ordered serparately RA - Coaxial shipped assembled but uninstalled See Standard Wire Termination Consult customer service No letter - No hardware * Not available with removalbe coax cable type connectors RO and RA. standard mounting. 091 (2.31) hole diameter F - Float K - Jackscrew (standard) L - Jackscrew (low profile) P - Jackpost Code on page 29. Coaxial cable will be RG-178U unless otherwise specified; length will be same as wire modification. P - Pin S - Socket L - Uninsulated, solid wire H - Insulated, solid or stranded S -Solder pot* 1 - .050 (1.27) centers SIGNAL CONTACT SPACING TOTAL CONTACT CAVITIES NUMBER OF COAXIALS SIGNAL CONTACT SPACING TOTAL CONTACT CAVITIES NUMBER OF COAXIALS COAXIAL TYPE COAXIAL TYPE SIGNAL CONTACT TYPE SIGNAL CONTACT TYPE SIGNAL CONTACT LEAD TYPE SIGNAL CONTACT LEAD TYPE SIGNAL CONTACT LEAD LENGTH SIGNAL CONTACT LEAD LENGTH MODIFICATION HARDWARE MODIFICATION HARDWARE RoHS COMPLIANCE R How to Order - Coaxial Cable Assemblies SERIES MD CC S * * * COAXIAL CABLE CONTACT TYPE CONTACT TYPE COAXIAL CABLE TYPE COAXIAL CABLE TYPE COAXIAL CABLE LENGTH COAXIAL CABLE LENGTH SERIES MD P - Pin (used with socket side connection) S - Socket (used with pin type connection) See Standard Wire Termination Codes on page 29. Coaxial cable will be RG-178U unless otherwise specified; length will be the same as wire modfication. 1 - RG178/U COAXIAL CABLE CC RoHS COMPLIANCE R

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Micro-D Plastic Shell - .050" Contact Spacing MDB Coaxial Dimension - MDB Coaxial Series Plug Receptacle (See page 9 for layouts) Part Number by Shell Size MDB1-7C2P* MDB1-7C2S* .510 (12.95) .602 (15.29) * Add lead type and length, see Part Number Explanation. Weight given is with 7 inch (177.80) insulated leads, #26 AWG silver plated copper pigtails and RG178/U coaxials. .204 (5.18) .185 (4.70) .298 (7.57) .279 (7.09) .782 (19.86) .782 (19.86) .395 (10.03) .375 (9.52) .510 (12.95) .540 (13.72) .290 (8.30) .273 (7.80) A Max. B Max. C Max. E Max. Max. D +_ .005 (0.13) Avg. Weight .190 (4.83) Max. .190 (4.83) Max. TWO MTG. HOLES TWO MTG. HOLES D .250 (6.35) MAX. A EXTENSION FOR RO AND RA COAXES EXTENSION FOR RO AND RA COAXES .625 (15.88) MAX. C B E A .625 (15.88) MAX. C B E .250 (6.35) MAX. 1.000 (25.40) MAX. D 1.000 (25.40) MAX.

Micro-D Plastic Shell - .050" Contact Spacing MD Mounting Hardware Views (Sizes 9-51) .178 ± .005 (4.52 ± 0.13) This hardware supplied unassembled. Screw Lock Assembly 90˚ Angle Mounting Bracket

Description

.100 (2.54) .122 (3.10) .257 (6.53) .215 (5.46) 015-9516-000 Mounting Bracket, 90˚ Angle- MD*1 for 9 thru 37 Shell Sizes MD*1 for 51 Shell Size NOTES: Screw lock assembly (322-9500-000) can be used for front front mounting. Jackpost kit (320-9505-000) consists of 2 assemblies, shipped unassembled. Part Number A ± .005 (0.13) B Max. Screw Lock Assembly* *NOTE: Torque value is 4.0 in/lbs max. Jackpost - (P) 90˚ Angle Mounting Bracket .052 (1.32) TYP. .260 (6.60) MAX. #2-56 UNC-2B THD B .096 ± .005 (2.44 ± 0.13)DIA. .093 (2.36) RECOMMENDED PANEL THICKNESS BUSHING .182 (4.62) MAX. .688 (17.48) MAX. .408 (10.36) MAX. RETAINING CLIP LOCK SCREW MATING FACE CONNECTOR SHOWN FOR REF. ONLY #2-56 UNC-2B .185 (4.70) MAX. .500 (12.7) MAX. PANEL REF. .232 (5.89) MAX. #2-56 UNC-2A .170 (4.32) MAX. A .014 +_ .004 (0.36 +_ 0.10) ALLOWABLE DIAMETRAL FLOAT .020 (0.51) MAX. ALLOWABLE AXIAL FLOAT .150 +_ .003 (3.81 +_ .076) .185 (4.70) MAX .093 (2.36) REF. .090 +_ .0015 (2.29 +_ 0.038)DIA .031 +_ .003 (0.79 +_ 0.08) MATING FACE MATING FACE #2-56 UNC-2A .490 (12.45) MAX MATING FACE CONNECTOR SHOWN FOR REF ONLY HEX HEAD - .050 (1.27) ACROSS FLATS .050 (1.27) DEEP (REF) .155 (3.94) MAX. PART HAS A .040 (1.02) MAX. AXIAL FLOAT #2-56 UNC-2A Jackscrew - (L) Low Profile Jackscrew - (K) Standard Float Mount - (F) PART HAS A .040 (1.02) MAX AXIAL FLOAT CONNECTOR SHOWN FOR REF. ONLY This hardware is factory installed. Shown here is a cutaway view of the float mount for the MD connector. The basic shell dimensions are the same for the float mount and the screw mounting hole configurations. View shown is for standard float mount front panel mounting. Reverse mounting is available on request. * NOTE: Torque values are as follows: Low Profile Jackscrew (L)-2.5 in/lbs Standard Jackscrew (K)-2.5 in/lbs www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

Micro-D Plastic Shell - .050" Contact Spacing MD Mounting Hardware to Military Specification (Sizes 9 - 51) PER MIL-DTL-83513/5 This hardware supplied unassembled. #2-56 UNC-2A THREAD TYP. .361 (9.17) MAX. PLUG (REF. WITH .092 (2.34) DIA. MOUNTING HOLES POTTING WELL (REF.) .010 (0.25) TH'K (REF.) Jackscrew - (L) Low profile * .062 (1.57) HEX. (REF.) .010 (0.25) TH'K (REF.) #2-56 UNC-2A THREAD TYP. PLUG (REF.) WITH .092 (2.34) DIA. MOUNTING HOLES POTTING WELL (REF.) Allen head Optional Head Configuration Plug and Receptacle Low and High Profile Jackscrew - (K) High Profile Slotted Head Jackpost Assembly Slotted Head Jackscrew Assy Low Profile Slotted Head Jackscrew Assy High Profile Allen Head Jackscrew Assy Low Profile Allen Head Jackscrew Assy High Profile Jackpost Assy -05 -06 -02 -03 -07 320-9508-025 320-9508-027 320-9508-026 320-9508-028 320-9505-033 M83513/5 Mode Code Part Number .125 (3.18) HEX #2-56 UNC-2B Thread .190 (4.83) +_ .185 (4.70) .062 (1.57) ± .010 (0.25) .475 (12.06) ± 0.25 (0.64) LOCK WASHER RETAINING NUT .154 (3.91) HEX. # 2-56 UNC-2A Thread Jackpost Bushing (For Rear Panel Mounting) #2-56 UNC 2A THD #2-56 UNC 2B THD MATING FACE .126 (3.20) .125 (3.18) DIA.TYP. 27˚/26˚TYP C .075 (1.91) + .005 (0.13) - .000 (0.00) R TYP. A B .170 (4.32) .185 (4.70) .500 (12.7) .480 (12.19) A HEX IS .135 (3.431/.115 (2.92) ACROSS FLATS 3/32 (2.4) 1/16 (1.6) 3/64 (1.2) 1/32 (0.8) 320-9505-007 320-9505-006 320-9505-005 320-9505-004 .379 ( 9.63) .529 (13.44) .679 (17.25) .779 (19.79) .929 (23.60) 1.079 (27.41) 1.029 (26.14) .219 (5.56) .219 (5.56) .219 (5.56) .219 (5.56) .219 (5.56) .219 (5.56) .261 (6.63) .565 (14.35) .715 (18.16) .865 (21.97) .965 (24.51) 1.115 (28.32) 1.265 (32.13) 1.215 (30.86) *2 Jackposts, 2 nuts, 2 washers. Panel Thickness A Dim. Jackpost Kit Number* A +.004 (0.10) -.000 (0.00) Shell Size Plug and Receptacle Dimensions B +.004 (0.10) -.000 (0.00) C +_.005 (0.13) NOTE: Torque value for jackpost 2.5 in/lbs Panel Mounting Dimensions .200 ±.005 (5.08 ±0.13) Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted Plug Front Mounted Receptacle Rear Mounted .395 ±.005 (10.03 ±0.13) .300 ±.005 (7.62 ±0.13) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

MD Glass-filled Diallyl Phthalate Plastic Insulator MDV Glass-filled Polyester Plastic Insulator Solder Pot Solder Pot Receptacle .022 (0.56) MAX. .022 (0.56) MAX. .093 ± .005 (2.36 ± 0.13) .093 ± .005 (2.36 ± 0.13) A A E E .130 (3.30) MAX. .210 (5.33) .204 (5.18) MAX. .185 (4.69) MAX. .375 (9.52) MAX. .356 (9.04) MAX. .065 (1.65) MAX. .065 (1.65) MAX. .170 (4.32) .170 (4.32) MAX. D D B B C C PCB ordering information - page 30 SERIES-INSULATOR STYLE-MATERIAL SERIES-INSULATOR STYLE-MATERIAL MD - Clip mounting -Diallyl phthalate MDV - Clip mounting-Polyester H - Insulated solid or stranded wire L - Uninsulated solid wire S - Solder pot to accept #26 AWG max. harness wire. No designator - No hardware - standard mounting .091 (2.31) hole diameter Not available in clip mounting. See page 79 and 81for additional codes. (H) 001 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, Yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. 1 - .050 (1.27) centers 9-15-21-25-31*-37-51. See page 7 P - Pin S - Socket CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION TYPE TERMINATION CODE TERMINATION CODE LOCKING HARDWARE MD P H 001 P RoHS COMPLIANCE R www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Micro-D Plastic Shell - .050" Contact Spacing MD/MDV Part Number by Shell Size MD1-9P MD1-9S MD1-15P MD1-15S MD1-21P MD1-21S MD1-25P MD1-25S MD1-37P MD1-37S MD1-51P MD1-51S MDV1-9-P MDV1-9S MDV1-15P MDV1-15S MDV1-21P MDV1-21S MDV1-25P MDV1-25S MDV1-37P MDV1-37S MDV1-51P MDV1-51S A Max. B Max. C Max. D Max. E Max. Avg. Weight* .512 (13.00) .512 (13.00) .662 (16.81) .662 (16.81) .812 (20.62) .812 (20.62) .912 (23.16) .912 (23.16) 1.212 (30.78) 1.212 (30.78) 1.162 (29.51) 1.162 (29.51) Add lead type and length, see Part Number Explanation. Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails. *** .292 (7.42) .376 (9.55) .442 (11.23) .526 (13.36) .592 (15.04) .676 (17.17) .692 (17.58) .776 (19.71) .992 (25.20) 1.076 (27.33) .942 (23.93) 1.026 (26.06) .405 (10.29) .405 (10.29) .555 (14.10) .555 (14.10) .705 (17.91) .705 (17.91) .805 (20.45) .805 (20.45) 1.105 (28.07) 1.105 (28.07) 1.055 (26.80) 1.055 (26.80) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .213 (5.41) .213 (5.41) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .258 (6.55) .258 (6.55) .026 (0.73) .026 (0.73) .038 (1.10) .035 (1.00) .053 (1.50) .050 (1.40) .063 (1.80) .056 (1.60) .086 (2.45) .076 (2.15) .109 (3.10) .093 (2.65) How to Order With Clip Mounting Slots