RMD01 GULFSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev.A1 www.gulfsemi.com RMD01 SINGLE PHASE GLASS PASSIVATED FAST RECOVERY SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE: 100V CURRENT:0.8A FEATURE MDF For surface mount application Reliable low cost construction utilizing molded plastic Technique Surge overload rating: 30A peak MECHANICAL DATA Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25 °C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL RMD01 Units Maximum Recurrent Peak Reverse Voltage Vrrm 100 V Maximum RMS Voltage Vrms 70 V Maximum DC blocking Voltage VDC 100 V Maximum Average Forward Rectified Current at Ta =40 °C If(av) 0.8 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Ifsm 30.0 A Maximum Instantaneous Forward Voltage at forward current 0.4A Vf 1.3 V Maximum Reverse Recovery Time (Note 1) Trr 150 nS Maximum DC Reverse Current Ta =25 °C at rated DC blocking voltage Ta =125 °C Ir 5.0 500.0 µA uA Typical Junction Capacitance (Note 2) Cj 15.0 pF Storage and Operating Junction Temperature Tj, Tstg -55 to +1 50 °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied voltage of 4.0 volt
Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES RMD01