RMCA0603DT1R00-UP

RMCA SEI | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

Rev Date: 5/17/2022 1 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RMCA Series Automotive Grade Anti-sulfur and AEC Compliant Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions Features:

• Small size and light weight
• Reliability and high quality
• “-HP” denotes high power
• “-UP” denotes ultra-high power
• Inner termination engineered to deter sulfur contamination
• AEC-Q200 qualified
• RoHS compliant and halogen free
• REACH compliant ± 400 ± 100 10 - 1M ± 200 - 10.2M - 30M 11M - 30M - Jumper: 1A - - - ± 800 0.1 - 0.324 0.1 - 0.33 ± 600 0.331 - 0.976 0.36 - 0.91 ± 400 ± 200 ± 100 10 - 1M 10 - 10M ± 200 - 10.2M - 30M 11M - 30M - Jumper: 1A - - - ± 1800 0.01 - 0.05 0.01 - 0.05 ± 800 0.051 - 0.1 0.051 - 0.1 ± 600 0.102 - 0.976 0.11 - 0.91 ± 400 ± 200 ± 100 10 - 1M 10 - 10M ± 200 - 10.2M - 30M 11M - 30M - Jumper: 1A - - - ± 1800 0.01 - 0.05 0.01 - 0.05 ± 800 0.051 - 0.1 0.051 - 0.1 ± 600 0.102 - 0.976 0.11 - 0.91 ± 400 ± 200 ± 100 10 - 1M 10 - 10M ± 200 - 10.2M - 30M 11M - 30M - Jumper: 1A - - - ± 1800 0.01 - 0.05 0.01 - 0.05 ± 800 0.051 - 0.1 0.051 - 0.1 ± 600 0.102 - 0.976 0.11 - 0.91 ± 400 ± 200 ± 100 10 - 1M 10 - 10M ± 200 - 10.2M - 30M 11M - 30M - Jumper: 2A - - - Ohmic Range (Ω) and Tolerance RMCA1210 0.5 200 400 1 - 9.76 - 10 - 10M RMCA1206 1.75 0.25 0.05 - 0.5 1.25 200 400 1 - 9.76 10 - 10M RMCA0402 RMCA0805 0.125 0.04 - 0.35 0.875 150 300 0.05 max. 10 - 10M 1 - 9.76 10 - 10M 0.05 max. 1 - 9.76 0.05 max. 0.1 10 - 10M TCR (ppm/ºC)Type/Code Power Rating (W) @ 70ºC Maximum Working Voltage (1) (V) Maximum Overload Voltage (V) 1 - 9.76 RMCA0603 0.07 - 0.7 0.05 max. 75 150 0.1 - 0.31 0.775 0.05 max. 0.063 50 100 Electrical Specifications

Rev Date: 5/17/2022 2 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RMCA Series Automotive Grade Anti-sulfur and AEC Compliant Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions Electrical Specifications (cont.) Electrical Specifications – High Power Electrical Specifications – High Power Low Ohm 1% and 5% ± 400 1 - 9.76 ± 100 10 - 10M ± 400 1 - 9.76 ± 100 10 - 10M ± 400 1 - 9.76 ± 100 10 - 10M ± 400 1 - 9.76 ± 100 10 - 10M ± 400 1 - 9.76 ± 100 10 - 10M ± 400 1 - 9.76 ± 100 10 - 10M ± 400 1 - 9.76 ± 100 10 - 10M Ohmic Range (Ω) and ToleranceType/Code Power Rating (W) @ 70ºC Maximum Working Voltage (1) (V) Maximum Overload Voltage (V) TCR (ppm/ºC) RMCA0402_-HP 0.1 50 100 RMCA0603_-HP 0.125 75 150 RMCA0805_-HP 0.25 150 300 RMCA1206_-HP 0.5 200 400 RMCA2010_-HP 1 RMCA2512_-HP 2 RMCA1210_-HP 0.66 1% and 5% ± 1000 0.22 - 0.442 ± 800 0.452 - 1 ± 1000 0.075 - 0.0976 ± 800 0.1 - 0.324 ± 600 0.33 - 1 ± 1800 0.01 - 0.049 ± 800 0.05 - 0.0976 ± 600 0.1 - 1 Ohmic Range (Ω) and ToleranceTCR (ppm/ºC) 0.1 - 0.35 0.879 RMCA0805_-HP 0.25 0.05 - 0.5 1.244 RMCA0402_-HP 0.1 0.15 - 0.31 0.786 Type/Code Power Rating (W) @ 70ºC Rated Voltage Range (V) Maximum Overload Voltage (V) RMCA0603_-HP 0.125 0.1% 1% 5% 10% ± 1800 0.01 - 0.05 0.01 - 0.05 ± 800 0.051 - 0.1 0.051 - 0.1 ± 600 0.102 - 0.976 0.11 - 0.91 ± 400 ± 200 ± 100 10 - 1M 10 - 10M ± 200 - 10.2M - 30M 11M - 30M - Jumper: 1A - - - ± 1800 0.01 - 0.05 0.01 - 0.05 ± 800 0.051 - 0.1 0.051 - 0.1 ± 600 0.102 - 0.976 0.11 - 0.91 ± 400 ± 200 ± 100 10 - 1M 10 - 10M ± 200 - 10.2M - 30M 11M - 30M - Jumper: 2A - - - 1 - 9.76 0.05 max. RMCA2512 1 0.1 - 0.99 2.475 200 400 - 10 - 10M Operating Temperature Range: -55°C ~ +155°C (1) Lesser of or maximum working voltage. - - RMCA2010 0.75 0.08 - 0.8 2.15 200 400 - 0.05 max. 1 - 9.76 10 - 10M Type/Code Power Rating (Watts) @ 70ºC Maximum Working Voltage (1) Maximum Overload Voltage Resistance Temperature Coefficient Ohmic Range (Ω) and Tolerance √ P*R

Rev Date: 5/17/2022 3 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RMCA Series Automotive Grade Anti-sulfur and AEC Compliant Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions 0.5% 1% and 5% ± 400 - 1 - 9.76 ± 100 10 - 1M 10 - 10M ± 400 - 1 - 9.76 ± 100 10 - 1M 10 - 10M ± 400 - 1 - 9.76 ± 100 10 - 1M 10 - 10M ± 400 - 1 - 9.76 ± 100 10 - 1M 10 - 10M ± 400 - 1 - 9.76 ± 100 10 - 1M 10 - 10M ± 400 - 1 - 9.76 ± 150 10 - 1M 10 - 10M ± 400 - 1 - 9.76 ± 150 10 - 1M 10 - 10M Ohmic Range (Ω) and Tolerance RMCA0402_-UP 0.2 150 200 TCR (ppm/ºC)Type/Code Power Rating (W) @ 70ºC Maximum Working Voltage (1) (V) Maximum Overload Voltage (V) 125 RMCA0805_-UP 0.5 200 300 RMCA0603_-UP 0.33 75 RMCA2512_-UP 3 200 400 250 500 RMCA1206_-UP 0.75 RMCA1210_-UP 1 RMCA2010_-UP 1.5 Electrical Specifications – High Power High Ohm Electrical Specifications – Ultra-high Power Electrical Specifications – High Power Low Ohm (cont.) 1% and 5% ± 1800 0.01 - 0.049 ± 800 0.05 - 0.0976 ± 600 0.1 - 1 ± 1800 0.01 - 0.049 ± 800 0.05 - 0.0976 ± 600 0.1 - 1 ± 1800 0.01 - 0.049 ± 800 0.05 - 0.0976 ± 600 0.1 - 1 ± 1800 0.01 - 0.049 ± 800 0.05 - 0.0976 ± 600 0.1 - 1 Ohmic Range (Ω) and Tolerance 0.14 - 1.41 Type/Code Power Rating (W) @ 70ºC Rated Voltage Range (V) Maximum Overload Voltage (V) TCR (ppm/ºC) 3.518RMCA2512_-HP 2 0.07 - 0.7 1.759 0.08 - 0.81 2.021 0.1 - 0.99 2.487 RMCA1206_-HP 0.5 RMCA1210_-HP 0.66 RMCA2010_-HP 1% and 5% Ohmic Range (Ω) and ToleranceTCR (ppm/ºC) RMCA0402_-HP 0.1 50 100 RMCA0805_-HP 0.25 150 300 Type/Code Power Rating (W) @ 70ºC Maximum Working Voltage (1) (V) Maximum Overload Voltage (V) RMCA2512_-HP 2 ± 200 10.1M - 30MRMCA1206_-HP 0.5 200 400 RMCA1210_-HP 0.66 RMCA2010_-HP 1 RMCA0603_-HP 0.125 75 150

Rev Date: 5/17/2022 4 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RMCA Series Automotive Grade Anti-sulfur and AEC Compliant Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions Mechanical Specifications Performance Characteristics L Body Length W Body Width RMCA0402 RMCA0603 RMCA0805 RMCA1206 RMCA1210 RMCA2010 RMCA2512 RMCA2512_-HP RMCA2512_-UP Bottom Termination H Body Height Top Termination UnitType/Code Test Test Method Test Specification Test Condition RMCA: ±1: ±(1% + 0.05 Ω) RMCA_-HP ±5: ±(2% + 0.1 Ω) Value <1 Ω: ±(2% + 0.1 Ω) RMCA_-UP ±1: ±(1% + 0.05 Ω) ±5: ±(1% + 0.05 Ω) Individual leaching area ≤ 5% Total leaching area ≤ 10% ±5: ±(1% + 0.05 Ω) Value <1 Ω: ±(1% + 0.05 Ω) Values <1 Ω: ± (1% + 0.1 Ω) Temperature Coefficient of Resistance (TCR) JIS C-5201-1 4.8 IEC-60115-1 4.8 Refer to Electrical Specifications table At 25ºC/-55ºC and 25ºC/+155ºC, 25ºC is the reference temperature Soldering Heat 260ºC ± 5°C for 10 seconds IR Reflow Leaching JIS-C-5201-1 4.18 IEC-60068-2-58 8.2.1 260ºC ± 5°C for 30 seconds JIS-C-5201-1 4.18 IEC-60068-2-58 8.2.1 2.5 times RCWV or Max. Overload voltage, whichever is less for 5 seconds Short Time Overload JIS-C-5201-1 4.13 IEC-60115-1 4.13 2.5 times RCWV or Max. Overload voltage, whichever is less for 2 seconds 5 times Rated Power or Max. Overload voltage, whichever is less for 5 seconds Temperature Cycling -55°C to +155°C, 5 cycles

Rev Date: 5/17/2022 5 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RMCA Series Automotive Grade Anti-sulfur and AEC Compliant Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions Test Test Method Test Specification Test Condition ±1: ±(1% + 0.05 Ω) Preheating temperature: 350ºC ± 10°C ±5: ±(1% + 0.05 Ω) Electric iron preheating time: 3 + 1/-0 seconds Values <1 Ω: ±(1% + 0.05 Ω) Values <1 Ω: ±(1% + 0.05 Ω) Values <1 Ω: ± (2% + 0.05 Ω) Values <1 Ω: ± (3% + 0.1 Ω) JIS C-5201-1 clause 4.6 Bending once for 5 seconds JIS C-5201-1 ±1: ±(1% + 0.05 Ω) D: 0402, 0603, 0805 = 5mm clause 4.33 ±5: ±(1% + 0.05 Ω) 1206, 1210 = 3mm 2010, 2512 = 2mm ±1% ± 0.05Ω Standard and high power products 60 ± 2°C, no power rating for 1000 hours 2% ± 0.05Ω Ultra high power products 105 ± 2°C, no power rating for 1000 hours Terminal Bending Strength Resistance to Solvent The tested resistor shall be immersed into isopropyl alcohol at 20ºC~25°C for 60 seconds. Then the resistor is left in the room for 48 hours. 40ºC ± 2°C, 90~95% R.H. RCWV or Max. Working Voltage, whichever is less for 1000 hours, with 1.5 hours "ON" and 0.5 hour "OFF". Load Life and Moisture Insulation Resistance ≥ 10G Ω 100V for 1 minute Load Life (Endurance) 70ºC ± 2°C, RCWV or Max. Working Voltage, whichever is less for 1000 hours, with 1.5 hours "ON" and 0.5 hour "OFF". Operating temperature range is -55ºC to +155ºC Electric Iron ATSM B809-95 ANSI/EIA-977Sulfur Test (FoS) AEC-Q200 Test Performance Characteristics (cont.) Test Test Method Test Specification Test Condition Method JA-104 2%, 5%: ±(1% + 0.1 Ω) Measurement at 24 ± 4 hours after test conclusion. 1000 hours 85°C/85% R.H. Method 2009 Inspect device construction, marking and workmanship. 5g for 20 minutes 12 cycles each of 3 orientations. Note: Test from 10-2000 hours Human body model 0402 / 0603: 1 KV 0805 and above: 2 KV ±1: ±(0.5% + 0.05 Ω) (1) 4 hours 155°C, dry heat Pressurizing force for 60 seconds 0402 / 0603: 8 N 0805 and above: 17.7 N ±1: ±(1% + 0.05 Ω) Bending once for 60 seconds. ±5: ±(1% + 0.05 Ω) 2010, 2512 sizes: 2 mm; other sizes: 3 mmAEC Q200-005Board Flex ±1: ±(1% + 0.05 Ω) ±5: ±(2% + 0.1 Ω) MIL-STD-202 Method 204 Terminal Strength (SMD) AEC Q200-006 Temperature Cycling Add aqueous wash chemical - OKEM clean or equivalentResistance to Solvent Biased Humidity High Temperature Exposure (Storage) 1000 hours. T=155ºC Unpowered. Measurement at 24 ± 4 hours after test conclusion 10% of operation power. Measurement at 24 ± 4 hours after test conclusion MIL-STD-202 Method 103 Operational Life No breakage ESD ±(3% + 0.05 Ω) AEC-Q200-002 or ISO/DIS 10605 MIL-STD-202 Method 108 Vibration Condition D steady state TA = 125ºC at derated power. Measurement at 24 ± 4 hours after test Solderability J-STD-002 Mechanical Shock MIL-STD-202 Method 213 ±1: ±(1% + 0.05 Ω) ±5: ±(2% + 0.1 Ω Wafe Form: Tolerance for half sine shock pulse. Peak value is 100g. Normal duration is 6 minutes External Visual -

Rev Date: 5/17/2022 6 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RMCA Series Automotive Grade Anti-sulfur and AEC Compliant Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions Power Derating Curve: Recommended Pad Layout Type / Code A B C Unit 0.024 0.063 0.028 inches 0.60 1.60 0.70 mm 0.031 0.094 0.039 inches 0.80 2.40 1.00 mm 0.051 0.114 0.055 inches 1.30 2.90 1.40 mm 0.087 0.165 0.067 inches 2.20 4.20 1.70 mm 0.079 0.173 0.106 inches 2.00 4.40 2.70 mm 0.150 0.260 0.106 inches 3.80 6.60 2.70 mm 0.193 0.319 0.134 inches 4.90 8.10 3.40 mm RMCA2010 RMCA2512 RMCA0402 RMCA0603 RMCA0805 RMCA1206 RMCA1210

Rev Date: 5/17/2022 7 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RMCA Series Automotive Grade Anti-sulfur and AEC Compliant Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions Rework temperature (hot air equipment): 350ºC, 3 – 5 seconds Recommended reflow methods: - IR, vapor phase oven, hot air oven. If reflow temperature exceed the recommended profile, devices may not meet the performance requirements. Packaging (EIA Standard RS-481) Packaging Specifications Recommended Soldering Profile Size Unit 0.453 ± 0.079 inches 11.50 ± 2.00 mm 0.630 ± 0.079 inches 16.00 ± 2.00 mmRMCA2010 RMCA2512 7" 4K RMCA0603 RMCA0805 RMCA1206 RMCA1210 7" 5K W M RMCA0402 A B C DSize 7" 10K

Rev Date: 5/17/2022 8 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RMCA Series Automotive Grade Anti-sulfur and AEC Compliant Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions Paper Tape Specifications Embossed Tape Specifications Size Unit 0.028 ± 0.004 0.047 ± 0.004 inches 0.70 ± 0.10 1.20 ± 0.10 mm 0.041 ± 0.008 0.071 ± 0.008 inches 1.05 ± 0.20 1.80 ± 0.20 mm 0.075 ± 0.008 0.138 ± 0.008 inches 1.90 ± 0.20 3.50 ± 0.20 mm 0.112 ± 0.008 0.138 ± 0.008 inches 2.85 ± 0.20 3.50 ± 0.20 mm Size Unit 0.018 ± 0.004 0.079 ± 0.004 inches 0.45 ± 0.10 2.00 ± 0.10 mm 0.024 ± 0.004 0.157 ± 0.004 inches 0.60 ± 0.10 4.00 ± 0.10 mm 0.030 ± 0.004 0.157 ± 0.004 inches 0.75 ± 0.10 4.00 ± 0.10 mm 0.030 ± 0.004 0.157 ± 0.004 inches 0.75 ± 0.10 4.00 ± 0.10 mm RMCA1206 RMCA1210 RMCA0603 RMCA0805 +0.004/-0 +0.1/-0 H T D P RMCA0402 G RMCA1206 RMCA1210 RMCA0805 RMCA0402 RMCA0603 A B W E F Size Unit 0.110 ± 0.008 0.220 ± 0.008 inches 3.40 ± 0.20 6.70 ± 0.20 mm Size Unit 0.033 ± 0.006 inches 0.85 ± 0.15 mm 0.037 ± 0.006 inches 0.95 ± 0.15 mm RMCA2010 RMCA2010 H T D RMCA2512 (-HP and -UP) F G P A B W E D1 T1 RMCA2512_-HP RMCA2512_-UP RMCA2512 +0.004/-0 +0.10/-0

Rev Date: 5/17/2022 9 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RMCA Series Automotive Grade Anti-sulfur and AEC Compliant Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions Top Adhesive Peel-off Strength: 10g~70g. RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictions on Hazardous Substances” (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. “Conflict Metals” Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined i n the “conflict region” of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to “REACH” We certify that all passive components supplied by Stackpole Ele ctronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, “The Registration, Evaluation, Authorization and Restriction of Chemicals”, otherwise referred to as REACH. Contact us for com plete list of REACH Substance Candidate List. Peel-Off Strength Specifications RoHS Compliance Status RMCA Automotive Grade Thick Film Chip Resistor SMD YES(1) 100% Matte Sn over Ni Always Always Note (1): RoHS Compliant by means of exemption 7c-I. Lead-Free Effective Date Code (YY/WW) Standard Product Series

Description

Mfg. Effective Date (Std Product Series)

Rev Date: 5/17/2022 10 www.seielect.com This specification may be changed at any time without prior notice . marketing@seielect.com Please confirm technical specifications before you order and/or use. RMCA Series Automotive Grade Anti-sulfur and AEC Compliant Thick Film Chip Resistor Stackpole Electronics, Inc. Resistive Product Solutions How to Order Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 R M C A 0 4 0 2 F T 1 R 0 0 - H P Resistance Value Code Description Code Std W -HP W -UP W Code Tol Code Description Size Quantity Code Description 0402 0.063 0.1 0.2 B 0.1% 0402 10000 blank Standard 0603 0.1 0.125 0.33 D 0.5% -HP High Power 0805 0.125 0.25 0.5 F 1% 1206 0.25 0.5 0.75 J 5% 3.9 ohm = 3R90 1210 0.5 0.66 1 K 10% 10 Kohm = 10K0 2010 0.75 1 1.5 Z Jumper 1.1 Mohm = 1M10 2512 1 2 3 Zero ohm jumper = 0R00 SpecialSize and Wattage 0603, 0805 1206, 1210 7" Reel Paper TapeT 7" Reel Plastic Tape 2010, 2512 4000 Ultra-high Power-UP Product Series Tolerance Four characters with the multiplier used as the decimal holder. Packaging RMCA Automotive Grade Thick Film Chip Resistors 5000