RMB11F CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 100 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 VOLTS VOLTS VOLTS SYMBOLS UNITS Amp Amps Volts VRRM VRMS VDC I(AV) IFSM VF 1.0 30.0 1.3 Operating junction and storage temperature range Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375”(9.5mm) lead length at TA=50 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=125 C IR 5.0 50.0 RθJA CJ TJ,TSTG 85.0 18.0 -55 to +150 pF C Aµ Typical thermal resistance (NOTE 3) C/W Typical junction capacitance (NOTE 1) Maximum reverse recovery time (NOTE 2) trr 150 250 500 ns RMB 11F RMB 12F RMB 13F RMB 14F RMB 16F RMB 18F RMB 110F Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. MDD Catalog Number Dimensions in inches and (millimeters) MBF
FEATURES
Glass passivated die construction Fast reverse recovery time Designed for surface mount application Plastic material-UL flammability 94V-0 Case: MBF,molded plastic Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on case Mounting Position: Any RθJL 30.0 Note: 1. Measured at 1MHz and applied reverse voltage of 4 V D.C. 2）Measured with IF = 0.5 A, IR = 1 A, Irr = 0.25 A . Mounted on glass epoxy PC board with 4×(5×5mm ）copper pad.
RATINGS AND CHARACTERISTIC CURVES RMB11F THRU RMB110F The cruve g ra p h is for reference onl y , can't be the basis for j ud g ment 曲线图仅供参考 Fig.3 Typical Instaneous Forward Characteristics Instaneous Forward Current (A) 0.01 0.1 1.0 Instaneous Forward Voltage (V) T =25J °C pulse with 300μs 1% duty cycle Fig.2 Typical Reverse Characteristics 0.1 1.0 100 20 40 60 80 100 12000 140 percent of Rated Peak Voltage (%)Reverse Instaneous Current（ A）Reverse μ T =125J °C T =25J °C Fig.4 Typical Junction Capacitance Junction Capacitance ( pF) 1.0 10 1000.1 100 Reverse Voltage (V) T =25J °C 10 1001 Fig.5 Maximum Non-Repetitive Peak Forward Surage Current Peak A)Forward Surage Current ( Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method) 0.2 0.4 0.6 0.8 1.0 0.0 25 50 75 100 125 150 175 Fig.1 Derating Curve Average Rectified Output Current Average Rectified Output Current (A) Ambient Temperature (°C) Glass Epoxy PC Board Resistive or Inductive Load 1.2 100LFM