RM8810 RECTRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Features

Applications

REV:O RM8810

Drain-Source Voltage VDS 20 V Drain Current - Continuous ID(Ta=25ć) 7.0 A Drain Current - Continuous ID(Ta=70ć) 5.7 Drain Current – Pulsed I DM 25 A Gate-Source Voltage V GS ±8.0 V Power Dissipation PD(Ta=25ć) 1.5 W Power Dissipation PD(Ta=70ć) 1.0 Junction-to-AmbientA t /g148 10s R/g537JA / Wć Junction-to-AmbientAD Steady-State 120 Junction-to-Lead Steady-State R /g537JL 70 / W ć Junction and Storage Temperature Range Tj, Tstg -55ν150 ȭ Parameter Symbol Test Conditions Min Typ Max Unit Drain-Source Breakdown Voltage BV DSS VGS=0V ID=250/g541A 20 V Drain-Source Leakage Current IDSS VDS=16V VGS=0V 1.0 /g541A Drain-Source Leakage Current VDS=16V VGS=0V Tj=85ć 10 /g541A Gate-Source Leakage Current I GSS V GS=±8V VDS=0V ±10 /g541A On state drain current I D(ON) V GS=4.5V VDS=5V 25 A Gate Threshold Voltage V GS(th) VDS=VGS ID=250/g541A 0.45 0.6 1.0 V Static Drain-Source On-Resistance R DS(on) VGS=4.5V ID=6.0A 16 20 m/g525 VGS=2.5V ID=6.0A 19 25 Forward Transconductance g FS VDS=5.0V ID=7.0A 50 S Forward On Voltage V SD V GS=0V IS=1.0A 1.3 V Maximum Body-Diode Continuous Current IS 2 A Input Capacitance C iss VDS=10V VGS=0V f=1.0MHz 1295 pF Output Capacitance C oss 160 Reverse Transfer Capacitance C rss 87 Absolute Maximum Ratings(T a=25Ȼ) Electrical Characteristics(T a=25Ȼ)

VDS=0V VGS=0V f=1.0MHz 1.8 K/g525 Total Gate Charge Q g VDS=10V VGS=4.5V ID=7.0A 10 14 nC Gate Source Charge Q gs 4.2 Gate Drain Charge Q gd 2.6 Turn-on Delay Time t d(on) VDS=10V VGS=4.5V RG=3.0/g525 RL=1.54/g525 280 ns Rise Time t r 328 ns Turn-off Delay Time t d(off) 3.76 /g541s Fall Time t f 2.24 /g541s Body Diode Reverse Recovery Time trr IF=7A dI/dt=100A/ms VGS=-9V 31 ns Body Diode Reverse Recovery Charge Qrr IF=7A dI/dt=100A/ms VGS=-9V 6.8 nC Notes: A. The value of R/g537JA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25°C.The value in any given application depends on the user's specific board design. B. The power dissipation P D is based on TJ(MAX)=150°C, using /g148 10s junction-to-ambient thermal resistance. C. Repetitive rating, pulse width limited by junction temperature T J(MAX)=150°C. Ratings are based on low frequency and duty cycles to keep initial TJ=25°C. D. The R/g537JA is the sum of the thermal impedence from junction to lead R/g537JL and lead to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300ms pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-ambient thermal impedence which is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, assuming a maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating. Electrical Characteristics(T a=25Ȼ)

RATING AND CHARACTERISTICS CURVES (RM8810)

RATING AND CHARACTERISTICS CURVES (RM8810)

Note: 8810: Product Type. **: 8810 ** Date code，change with manufacturing date.

:KSVKXGZ[XK6XULORKLUX/88KLRU]9URJKXOTM6H,XKK 1.Preheating:25~150 ȭ, Time:60~90sec. 2.Peak Temp.:245 r5ȭ, Duration:5r0.5sec. 3 . Cooling Speed: 2~10ȭ/sec. Resistance to Soldering Heat Test Conditions Temp:260±5 ć Time:10±1 sec Packaging SPEC. REEL Package Type Units Dimension (unit ġmm Units/Reel Reels/Inner Box Units/Inner Box Inner Boxes/Outer Box Units/Outer Box Reel Inner Box Outer Box SOT23-5/6 3,000 10 30,000 4 120,000 7ͳ×8 210×205×205 445×230×435 Notes:

Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE