RM6S-3H3-A160

RM6S-3D3-E63 FERROXCUBE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Supersedes data of September 2004 2008 Sep 01 FERROXCUBE RM6S RM, RM/I, RM/ILP cores and accessories

2008 Sep 01 1208

RM, RM/I, RM/ILP cores and accessories RM6S CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.863 mm −1 Ve effective volume 840 mm 3 Ie effective length 27.3 mm Ae effective area 31.0 mm 2 Amin minimum area 23.8 mm 2 m mass of set ≈ 5.1 g handbook, halfpage CBW296 2.8 12.4 ±0.1 10.35 ±0.2 2.3 M1.7 >8.4 8 +0.4 ∅3 +0.1 ∅12.4 +0.5 14.7 0 −0.6 8.2 0 −0.4 17.9 0 −0.7 ∅6.4 0 −0.2 Fig.1 RM6S core set. Dimensions in mm. Core sets for filter applications Clamping force for AL measurements, 40 ±20 N. GRADE AL (nH) µe TOTAL AIR GAP (µm) TYPE NUMBER (WITH NUT) TYPE NUMBER (WITHOUT NUT) 3D3 63 ±3% ≈ 44 ≈ 850 RM6S-3D3-E63/N RM6S-3D3-E63 100 ±3% ≈ 70 ≈ 460 RM6S-3D3-E100/N RM6S-3D3-E100 160 ±3% ≈ 112 ≈ 250 RM6S-3D3-A160/N RM6S-3D3-A160 950 ±25% ≈ 670 ≈ 0 − RM6S-3D3 3H3 160 ±3% ≈ 112 ≈ 280 RM6S-3H3-A160/N RM6S-3H3-A160 250 ±3% ≈ 175 ≈ 160 RM6S-3H3-A250/N RM6S-3H3-A250 315 ±3% ≈ 221 ≈ 120 RM6S-3H3-A315/N RM6S-3H3-A315 400 ±3% ≈ 280 ≈ 90 RM6S-3H3-A400/N RM6S-3H3-A400 2100 ±25% ≈ 1470 ≈ 0 − RM6S-3H3

2008 Sep 01 1209

RM, RM/I, RM/ILP cores and accessories RM6S INDUCTANCE ADJUSTERS General data PARAMETER SPECIFICATION Material of head and thread polypropylene (PP), glass fibre reinforced Maximum operating temperature 125 °C handbook, halfpage MGC079 9.5 3.4 M 1.7 3.13O 0.07 2.4 min 0.7 Fig.2 RM6S inductance adjuster. Dimensions in mm. Inductance adjuster selection chart (applies to all types) Note 1. Maximum adjustment range. GRADE AL (nH) TYPES FOR LOW ADJUSTMENT ∆L/L(1) TYPES FOR MEDIUM ADJUSTMENT ∆L/L(1) TYPES FOR HIGH ADJUSTMENT ∆L/L(1) 3H3 40 −− − − ADJ-RM6-GREEN 20 63 −− ADJ-RM6-GREEN 14 ADJ-RM6-RED 22

100 ADJ-RM6-GREEN 10 ADJ-RM6-RED 16 −−

160 ADJ-RM6-GREEN 6 ADJ-RM6-RED 11 ADJ-RM6-WHITE 19

200 ADJ-RM6-RED 9 ADJ-RM6-WHITE 15 ADJ-RM6-VIOLET 19

250 ADJ-RM6-WHITE 12 ADJ-RM6-VIOLET 14 ADJ-RM6-BROWN 20

315 ADJ-RM6-WHITE 9 ADJ-RM6-BROWN 15 ADJ-RM6-BLACK 23

400 ADJ-RM6-VIOLET 8 ADJ-RM6-BLACK 16 ADJ-RM6-GREY 26

630 ADJ-RM6-BLACK 9 ADJ-RM6-GREY 15 −−

1000 ADJ-RM6-BLACK 5 ADJ-RM6-GREY 9 −−

1250 −− ADJ-RM6-GREY 5 −− 3D3 40 −− − − ADJ-RM6-GREEN 19 63 −− ADJ-RM6-GREEN 14 ADJ-RM6-RED 22

100 ADJ-RM6-GREEN 9 ADJ-RM6-RED 15 ADJ-RM6-WHITE 27

160 ADJ-RM6-RED 9 ADJ-RM6-WHITE 16 −−

2008 Sep 01 1210

RM, RM/I, RM/ILP cores and accessories RM6S COIL FORMERS General data Winding data and area product for 4-pins RM6S coil former PARAMETER SPECIFICATION Coil former material phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E167521(M) Pin material copper-tin alloy (CuSn), tin (Sn) plated Maximum operating temperature 180 °C, “IEC 60085” , class H Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 NUMBER OF SECTIONS NUMBER OF PINS PIN POSITIONS USED WINDING AREA (mm2) WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 4 all 15 6.4 30 465 CSV-RM6S/R-1S-4P 24 a l l 2 × 7.0 2 × 3.0 30 2 x 217 CSV-RM6S/R-2S-4P handbook, full pagewidth 2.54 0.75 (6.4 min. ) 0.4 5.2 0.4 7.62 1.6 12.7 8.6 5.7 max. 1.4 min. CBW612 ∅0.6 1.0 +0.15 6.5 +0.15 0 ∅12.3 0 −0.2 7.8 0 −0.15 0.8 0 −0.1 ∅7.45 0 −0.1 Fig.3 RM6S coil former; 4-pins. Dimensions in mm.

2008 Sep 01 1211

RM, RM/I, RM/ILP cores and accessories RM6S General data Winding data and area product for RM6S coil former Note 1. Also available with post-inserted pins. PARAMETER SPECIFICATION Coil former material unsaturated polyester (UP), gla ss-reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E61040 (M) Solder pad material copper-tin alloy CuSn), tin (Sn) plated Maximum operating temperature 180 °C, “IEC 60085”, class H Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 NUMBER OF SECTIONS NUMBER OF PINS PIN POSITIONS USED WINDING AREA (mm2) WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 6 all 15.0 6.3 30.0 465 CSV-RM6S-1S-6P-G (1) 1 5 1, 2, 3, 5, 6 15.0 6.3 30.0 465 CSV-RM6S-1S-5P-G (1) 1 4 2, 3, 5, 6 15.0 6.3 30.0 465 CSV-RM6S-1S-4P-G (1) 26 a l l 2 × 7.0 2 × 3 30.0 2 x 217 CSV-RM6S-2S-6P-G (1) handbook, full pagewidth ∅ 0.5 7.85 6.26 min. 0.52 0.87 0.8 0 −0.1 ∅12.3 −0.2 ∅ 7.45 ±0.2 0.45 12.7 7.62 6.5 +0.15 0.7 min. 8.5 1 +0.15 2.54 CBW516 3 4 Fig.4 Coil former for RM6S; 6-pins. Dimensions in mm.

2008 Sep 01 1212

RM, RM/I, RM/ILP cores and accessories RM6S General data Winding data and area product for RM6S coil former PARAMETER SPECIFICATION Coil former material unsaturated polyester (UP), gla ss-reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E61040 (M) Solder pad material copper-clad steel, tin (Sn) plated Maximum operating temperature 180 °C, “IEC 60085”, class H Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 NUMBER OF SECTIONS NUMBER OF PINS WINDING AREA (mm2) WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 8 14.5 6.26 30.7 450 CSV-RM6S-1S-8P handbook, full pagewidth CBW515 2.54 1 +0.15 ∅0.5 7.85 −0.1 6.26 min. 0.52 0.87 0.8 ∅12.3 −0.2 ∅7.45 −0.1 6.5 +0.05 8.4 min. 12.7 7.62 0.65 min. Fig.5 Coil former for RM6S; 8-pins. Dimensions in mm.

2008 Sep 01 1213

RM, RM/I, RM/ILP cores and accessories RM6S MOUNTING PARTS General data ITEM SPECIFICATION Clamping force ≈20 N Clip material steel Clip plating silver (Ag) Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 Type number CLI/P-RM6 handbook, halfpage MGC082 12 9.8 4.50.7 1.6 2.3 Fig.6 Mounting clip for RM6S. Dimensions in mm.

2008 Sep 01 1214

RM, RM/I, RM/ILP cores and accessories RM6S DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelimin ary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.