RM5-3C90

RM5-3C90-A63 FERROXCUBE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Supersedes data of September 2004 2008 Sep 01 FERROXCUBE RM5/I RM, RM/I, RM/ILP cores and accessories

2008 Sep 01 2

RM, RM/I, RM/ILP cores and accessories RM5/I CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.935 mm −1 Ve effective volume 574 mm 3 Ie effective length 23.2 mm Ae effective area 24.8 mm 2 Amin minimum area 18.1 mm 2 m mass of set ≈ 3.2 g handbook, halfpage MGC050 12.3 0 0.5 2.56.8 6.3 0.4 14.9 max 4.9 0 0.2O 10.4 0.1 10.2 0.4 0.4 O 9.1 0.25 Fig.1 RM5/I core set. Dimensions in mm. Core sets for general purpose Clamping force for AL measurements, 12 ±5N . GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C90 63 ±3% ≈ 47 ≈ 680 RM5/I-3C90-A63 100 ±3% ≈ 74 ≈ 380 RM5/I-3C90-A100 160 ±3% ≈ 119 ≈ 220 RM5/I-3C90-A160 250 ±3% ≈ 186 ≈ 130 RM5/I-3C90-A250 315 ±5% ≈ 234 ≈ 100 RM5/I-3C90-A315 2000 ±25% ≈ 1490 ≈ 0R M 5 / I - 3 C 9 0 3C94 63 ±3% ≈ 47 ≈ 680 RM5/I-3C94-A63 100 ±3% ≈ 74 ≈ 380 RM5/I-3C94-A100 160 ±3% ≈ 119 ≈ 220 RM5/I-3C94-A160 250 ±3% ≈ 186 ≈ 130 RM5/I-3C94-A250 315 ±5% ≈ 234 ≈ 100 RM5/I-3C94-A315 2000 ±25% ≈ 1490 ≈ 0R M 5 / I - 3 C 9 4 3C95 2350 ±25% ≈ 1750 ≈ 0R M 5 / I - 3 C 9 5 3C96 1800 ±25% ≈ 1340 ≈ 0R M 5 / I - 3 C 9 6 3F3 63 ±3% ≈ 47 ≈ 680 RM5/I-3F3-A63 100 ±3% ≈ 74 ≈ 380 RM5/I-3F3-A100 160 ±3% ≈ 119 ≈ 220 RM5/I-3F3-A160 250 ±3% ≈ 186 ≈ 130 RM5/I-3F3-A250 315 ±5% ≈ 234 ≈ 100 RM5/I-3F3-A315 1700 ±25% ≈ 1270 ≈ 0R M 5 / I - 3 F 3

2008 Sep 01 3

RM, RM/I, RM/ILP cores and accessories RM5/I Core sets of filter and high permeability grades Clamping force for AL measurements, 12 ±5N . Properties of core sets under power conditions Properties of core sets under power conditions (continued) 3F35 1300 ±25% ≈ 970 ≈ 0R M 5 / I - 3 F 3 5 3F4 100 ±3% ≈ 74 ≈ 360 RM5/I-3F4-A100 160 ±3% ≈ 119 ≈ 200 RM5/I-3F4-A160 250 ±3% ≈ 186 ≈ 110 RM5/I-3F4-A250 900 ±25% ≈ 670 ≈ 0R M 5 / I - 3 F 4 3F45 900 ±25% ≈ 670 ≈ 0R M 5 / I - 3 F 4 5 GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3B46 2800 ± 25% ≈ 2080 ≈ 0R M 5 / I - 3 B 4 6 3E27 4975 ± 25% ≈ 3700 ≈ 0R M 5 / I - 3 E 2 7 3E5 6700 +40/ −30% ≈ 4990 ≈ 0R M 5 / I - 3 E 5 3E6 8500 +40/ −30% ≈ 6330 ≈ 0R M 5 / I - 3 E 6 GRADE B( m T )a t C O R EL O S S( W )a t H=2 5 0A / m ; f = 25 kHz; T = 100 °C f = 25 kHz; =2 0 0m T ; T = 100 °C f = 100 kHz; = 100 mT; T = 100 °C f=1 0 0k H z ; = 200 mT; T=2 5 °C f = 100 kHz; = 200 mT; T=1 0 0 °C f = 400 kHz; =5 0m T ; T = 100 °C GRADE B (mT) at CORE LOSS (W) at H=2 5 0A / m ; f = 25 kHz; T = 100 °C f=5 0 0k H z ; =5 0m T ; T = 100 °C f = 500 kHz; = 100 mT; T = 100 °C f=1M H z ; =3 0m T ; T=1 0 0 °C f=1M H z ; =5 0m T ; T = 100 °C f=3M H z ; =10 mT; T=1 0 0 °C GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ Bˆ

2008 Sep 01 4

RM, RM/I, RM/ILP cores and accessories RM5/I COIL FORMERS General data SMD coil former Winding data and area product for RM5/I coil former (SMD) PARAMETER SPECIFICATION Coil former material phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E41429 (M) Solder pad material copper-clad steel, tin (Sn) plated Maximum operating temperature 155 °C, “IEC 60085”, class F Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 NUMBER OF SECTIONS NUMBER OF SOLDER PADS WINDING AREA (mm WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 8 9.5 4.7 24.9 236 CSVS-RM5-1S-8P handbook, full pagewidth ∅ 5.9 0 −0.1 6.1 0 −0.1 ∅ 10.1 0 −0.15 ∅ 5 +0.1 8.65 max. 0.3 0.9 3.75 11.25 14.15 max. 1.8 14.9 max. 0.454.7 min. 11.2 2.8 3.75 CBW512 Fig.2 SMD coil former for RM5/I. Dimensions in mm.

2008 Sep 01 5

RM, RM/I, RM/ILP cores and accessories RM5/I Additional coil formers are those of “RM5”, but “area product” is different. Winding data and area product (for RM5/I) for 4-pins RM5 coil former Winding data and area product (for RM5/I) for 6-pins RM5 coil former Note Also available with post-inserted pins. NUMBER OF SECTIONS NUMBER OF PINS PIN POSITIONS USED WINDING AREA (mm2) WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 4 all 9.5 4.8 25 236 CSV-RM5-1S-4P 24 a l l 2 × 4.35 2 × 2.2 25 2 x 108 CSV-RM5-2S-4P NUMBER OF SECTIONS NUMBER OF PINS PIN POSITIONS USED WINDING AREA (mm2) WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 6 all 9.2 4.68 24.9 228 CSV-RM5-1S-6P-G () 1 5 1, 2, 3, 5, 6 9.2 4.68 24.9 228 CSV-RM5-1S-5P-G () 1 4 2, 3, 5, 6 9.2 4.68 24.9 228 CSV-RM5-1S-4P-G () 26 a l l 2 × 4.15 2 × 2.06 24.9 2 x 103 CSV-RM5-2S-6P-G () 2 5 1, 2, 3, 5, 6 2 × 4.15 2 × 2.06 24.9 2 x 103 CSV-RM5-2S-5P-G ()

2008 Sep 01 6

RM, RM/I, RM/ILP cores and accessories RM5/I MOUNTING PARTS General data mounting clip with earth pin ITEM SPECIFICATION Clamping force ≈6N Clip material stainless steel (CrNi) Clip plating tin (Sn) Solderability ‘‘IEC 60068-2-20’’, Part 2, Test Ta, method 1 Type number CLI/P-RM4/5/I Fig.3 Mounting clip with earth pin for RM5/I. Dimensions in mm. handbook, halfpage CBW361 9.8 8.2 4.3 R22 0.7 2.1 General data mounting clip without earth pin ITEM SPECIFICATION Clamping force ≈5N Clip material stainless steel (CrNi) Type number CLI-RM4/5/I handbook, halfpage CBW124 9.8 8.2 2.1 R22 Fig.4 Mounting clip without earth pin for RM5/I. Dimensions in mm.

2008 Sep 01 7

RM, RM/I, RM/ILP cores and accessories RM5/I DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelimin ary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.