RM123 RECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
N-Channel Enhancement Mode Power MOSFET General Features V DS = 100V,I D = 0.17A R DS(ON) GS R DS(ON) < 5.0Ω @ V GS =10V Lead free product is acquired Surface mount package Application Direct logic-level interface: TTL/CMOS Drivers: relays, solenoids, lamps, hammers , display, memories, transistors, etc. Battery operated systems Solid-state relays Schematic diagram Marking and pin assignment SOT-23 top view Package Marking and Ordering Information Device Marking Device Device Package Reel Size Tape width Quantity SA RM123 -23 Ø180mm 8 mm 3000 units Absolute Maximum Ratings (T A =25 unless otherwise noted) Parameter Symbol Limit Unit Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ±20 V Drain Current-Continuous I D 0.17 A Drain Current-Pulsed (Note 1) I DM 0.68 A Maximum Power Dissipation P D 0.225 W Operating Junction and Storage Temperature Range T J STG -55 To 150 Thermal Characteristic Thermal Resistance,Junction-to-Ambient (Note 2) R θJA 556 /W Electrical Characteristics (T A =25 unless otherwise noted) Parameter Symbol Condition Min Typ Max Unit Off Characteristics Drain-Source Breakdown Voltage BV DSS V GS =0V I D Zero Gate Voltage Drain Current I DSS V DS =100V,V GS =0V SA Halogen-free P/N suffix V means AEC-Q101 qualified, e.g:RM123V 4.5V=4.5V=4.5V RM123 SOT < 6.0Ω @ V A=250/g541 100 - V- - - 15 A μ 2020-03/74 REV:O
Gate-Body Leakage Current I GSS V GS =±20V,V DS On Characteristics (Note 3) Gate Threshold Voltage V GS(th) V DS GS ,I =1.0m D A 0.8 V GS =4.5V, I D 3.5 /g525 Drain-Source On-State Resistance R DS(ON) V GS =10V, I D /g525 Forward Transconductance g FS V DS =25V,I D =0.1A Dynamic Characteristics (Note4) Input Capacitance C lss Output Capacitance C oss Reverse Transfer Capacitance C rss V DS =25V,V GS =0V, F=1.0MHz Switching Characteristics (Note 4) Turn-on Delay Time t d(on) Turn-on Rise Time t r Turn-Off Delay Time t d(off) Turn-Off Fall Time t f V DD =30V,I c =0.28A V GS =10V,R GEN =50 Drain-Source Diode Characteristics Diode Forward Voltage (Note 3) V SD V GS =0V,I S =0.34A - Notes: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on FR4 Board, t /g148 10 sec. 3. Pulse Test: Pulse Width /g148 300/g541s, Duty Cycle /g148 2%. 4. Guaranteed by design, not subject to production 2.0 V =0.17A =0.17A 6.0 3.2 5.0 =0V - - 50 nA 80 - - mS 20- - PF 9.0- - PF 4.0- - PF 20- - nS -- - nS 40- - nS - - nS /g525 - 1.3 V
- All dimensions are in millimeters. 2. Tolerance ±0.10mm (4 mil) unless otherwise specified 3. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 5 mils. 4. Dimension L is measured in gauge plane. 5. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact. Dimensions in Millimeters Symbol MIN. MAX. A 0.900 1.150 A1 0.000 0.100 A2 0.900 1.050 b 0.300 0.500 c 0.080 0.150 D 2.800 3.000 E 1.200 1.400 E1 2.250 2.550 e 0.950TYP e1 1.800 2.000 L 0.550REF L1 0.300 0.500 /g537 0° 8°
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE