RLR20C2611FS-SLT

RLR20C2611FS-SLT TTELEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Established Reliability Mil-Qualified Metal Glaze™ Resistor RLR Series 1/2 watt TCR of ±100 ppm/°C 1% and 2% tolerance 4.3 ohms to 3.01M ohms MIL-R-39017 approved to “S” level General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc• 4222 South Staples Street • Corpus Christi Texas 78411 USAWire and Film Technologies Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com RLR Series

• 1/8 watt to 1/2 watt
• TCR of ±100 ppm/°C
• 1% and 2% tolerance
• 4.3 ohms to 3.01M ohms
• MIL-R-39017 approved to "S" level Established Reliability Mil-Qualified Metal Glaze™ Resistor Electrical Data MIL Type Marking Tolerance (±%) T.C. (ppm/°C) Power Rating (watts) Resistance Range (ohms) Nominal Size Max Voltage Rating RLR20/S Stamp 1, 2 100 1/2 @ 70°C 4.3 to 3.01M 1/2W 350 Test Conditions MIL-R-22684 Test Limits Allowed Max. %∆R (±3σ) Temperature Coefficient (ppm/°C) ±100 ±100 Low Temperature Operation ±0.25% ±0.05% Thermal Shock ±0.25% ±0.15% Moisture Resistance ±1.00% ±0.50% Short Time Overload ±0.50% ±0.15% Load Life (70°C, Rated Power) 1000 hour ±4.00% ±0.50% Terminal Strength ±0.25% ±0.05% Effect of Soldering ±0.25% ±0.10% Shock ±0.50% ±0.05% Vibration ±0.50% ±0.05% High Temperature Exposure (150°C No Load) ±2.00% ±0.50% Environmental Data Dielectric Strength ±0.25% ±0.05% ESTABLISHED RELIABILITY MIL SPECIFICATIONS: RLR products listed above are qualified to the appropriate established reliability MIL Specification. In general, Metal Glaze units such as these are specified for all RLR requirements. Tough molded jacket Metal Glaze thick film element fired at 1000°C to solid ceramic core Tin-lead electroplated copper leads Spiraled or laser helixed to resistance value, toleranceHigh temperature soldered termination-lead assembly Digital marking per MIL-R-39017 RLR Series Issue November 2008 Sheet 1 of 3 Tough molded jacket Metal Glaze thick film element fired at 1000˚C to solid ceramic core Tin-lead electroplated copper leads Spiraled or laser helixed to resistance value, toleranceHigh temperature soldered termination-lead assembly Digital marking per MIL-R-39017 Resistors Make Possible 10.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2) OBSOLETE

Established Reliability Mil-Qualified Metal Glaze™ Resistor RLR Series

• 4222 South Staples Street • Corpus Christi Texas 78411 USAWire and Film Technologies Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com Dimensions (Inches and (mm)) Nominal Size Body Length BL Body Diameter BD Lead Length LL Lead Diameter LD Clean Lead 1/2 watt 0.390 ±0.010 (9.9 ±0.3) 0.140 ±0.008 (3.6 ±0.2) 1.50 ±0.125 (38.1 ±3.2) 0.032 ±0.002 (0.81 ±0.05) 0.450 (11.4) Physical Data LL LD BL BD Established Reliability Mil-Qualified Metal Glaze™ Resistor RLR Series Issue November 2008 Sheet 2 of 3 Make Possible 10.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com

Established Reliability Mil-Qualified Metal Glaze™ Resistor RLR Series

• 4222 South Staples Street • Corpus Christi Texas 78411 USAWire and Film Technologies Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com Sample Part No. MIL Style RL = Fixed Film Resistor. Established reliability. Power Rating 20 = 1/2 watt Lead Material C = Solderable/weldable leads Resistance First three digits represent significant figures; fourth digit is number of zeros. Tolerance F = ±1%, G = ±2% Failure Rate S = 0.001% for 1000 hours (60% confidence) Ordering Data RLR 20 C 1001 F S Established Reliability Mil-Qualified Metal Glaze™ Resistor 100 70 125 150 175 Ambient Temperature (°C) RLR 165 MIL Spec. Power Derating Chart % Of MIL Spec. Rated Power RLR Series Issue November 2008 Sheet 3 of 3 Make Possible 10.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com