RLP-288 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Features

  • high rejection
  • sharp insertion loss roll off
  • excellent VSWR, 1.15:1 typ.@ passband
  • aqueous washable Typical Frequency Response Functional Schematic RLP-288+ GROUP DELAY 0 50 100 150 200 250 300 FREQUENCY (MHz) GROUP DELAY (nSec) RLP-288+ INSERTION LOSS 0 150 300 450 600 750 900 1050 1200 1350 1500 FREQUENCY (MHz) INSERTION LOSS (dB) RLP-288+ RETURN LOSS 0 150 300 450 600 750 900 1050 1200 1350 1500 FREQUENCY (MHz) RETURN LOSS (dB) Frequency Insertion Loss Return Loss Frequency Group Delay (MHz) (dB) (dB) (MHz) (nSec) x σ Low Pass Filter Electrical Specifications (TAMB= 25OC) PASSBAND fco, MHz STOPBAND VSWR (:1) (MHz) Nom. (MHz) Passband Stopband (Loss < 2dB) (Loss 3dB) (Loss > 20dB) (Loss > 40dB) Typ. Typ. DC - 288 310 390 - 455 455 - 1500 1.15 20 RF IN RF OUT 50Ω DC to 288 MHz Low Pass Filter Metal Shield CASE STYLE: GP731 40 dB 20 dB 3 dB 1 dB FREQUENCY / Fco ATTENUATION, dB DC 0.9 1 1.35 1.75 3 40 dB 20 dB 20 dB 40 dB DC 0.9 1 1.3 1.5 17 ATTENUATION, dB FREQUENCY / fCO Permanent damage may occur if any of these limits are exceeded.

Applications

  • wireless communications
  • receivers / transmitters Suggested Layout, Tolerance to be within ±.002 METALLIZATION SOLDER RESIST PCB Land Pattern RF IN 2 RF OUT 6 GROUND 1, 3, 4, 5, 7, 8 Pin Connections Outline Drawing Demo Board MCL P/N: TB-332 Suggested PCB Layout (PL-176) Outline Dimensions ( )inch mm A B C D E F G H J K L M N P Q R wt. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Available Tape and Reel at no extra cost Reel Size Devices/Reel 7” 10, 20, 50, 100, 200 13” 500,1000 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications