RL1632W-6-R001F

RL1632W-6-R001F DELTA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY O F Delta Electronics, Inc. type for use in electronic equipment. The “ R “ shall be used as a decimal point. Figure 1. Construction and Dimensions

TITLE : DOCUMENT NO. SMN60000NH PAGE REV. A 0 UNLESS OTHERWISE SPECIFIED TOLERANCES ON ﹕ X = ± X.X = ± X.XX = ± ANGLES ± HOLE DIA. ± SCALE ﹕ X UNIT ﹕ X APPROVED BY ﹕ DRAWN BY ﹕ connie 4/3/13 DESIGNED BY ﹕ CHECKED BY ﹕ THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY O F Delta Electronics, Inc. AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FO R THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION 台達電子工業股份有限公司台達電子工業股份有限公司台達電子工業股份有限公司台達電子工業股份有限公司 Delta Electronics, Inc . The Engineering Spec. For 1W 0612 Low Resistance Chip Resistor 4. Ratings 4-1 Specification Power Ratings * 1 W Resistance Value 1 ~10m Ω Resistance Tolerance ±1% 、±2% 、±5% Temperature Coefficient of Resistance ±150ppm/ ℃ (Reflow) Note * ： Power ratings is based on continuous full load operation at rated ambient temperature of 70 ℃. For resistors operated at ambient temperature in excess of 70 ℃, the maximum load shall be derated in accordance with the following curve. Figure 2. ：Power Temperature Derating Curve 4-2 Rated V oltage The rated voltage shall be determined by the following expression. RPV ×= Where V ：Rated voltage (V) R ：Nominal resistance value ( Ω ) P：Rated dissipation (W) 4-3 Operating and Storage Temperature Range -55 to +155℃ AMBIENT TEMPERATURE( )℃ 0 -55 RATED LOAD(%) 100 70 155

TITLE : DOCUMENT NO. SMN60000NH PAGE REV. A 0 UNLESS OTHERWISE SPECIFIED TOLERANCES ON ﹕ X = ± X.X = ± X.XX = ± ANGLES ± HOLE DIA. ± SCALE ﹕ X UNIT ﹕ X APPROVED BY ﹕ DRAWN BY ﹕ connie 4/3/13 DESIGNED BY ﹕ CHECKED BY ﹕ THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY O F Delta Electronics, Inc. AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FO R THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION 台達電子工業股份有限公司台達電子工業股份有限公司台達電子工業股份有限公司台達電子工業股份有限公司 Delta Electronics, Inc . The Engineering Spec. For 1W 0612 Low Resistance Chip Resistor 5. Life test Test Item Condition of Test Requirements Short Time Overload 2.5 * rated power for 5 seconds Refer to JIS C 5201-1 4.13 ΔR : ± 1.0% Thermal Shock -55 ~125 ℃ 100 cycles, 15 min at each extreme condition Refer to JIS C 5201-1 4.19 ΔR : ± 1.0% Low Temperature Storage Kept at -55 ℃, 1,000 hours Refer to JIS C 5201-1 4.23.4 ΔR : ± 2.0% Load Life Rated voltage for 1.5hours followed by a pause 0.5hour at 70 ± 3 ℃. Cycle repeated 1000 hours Refer to JIS C 5201-1 4.25 ΔR : ± 2.0% Damp Heat with Load 40 ± 2 ℃ with relative humidity 90% to 95%. Cycle repeated 1,000 hours Refer to JIS C 5201-1 4.24 ΔR : ± 2.0% High Temperature Exposure Kept at 170 ℃ for 1,000 hours Refer to JIS C 5201-1 4.23.2 ΔR : ± 2.0% Solderability Temperature of Solder : 245 ± 5℃ Immersion Duration : 3 ± 0.5 seconds Refer to JIS C 5201-1 4.17 Uniform coating of solder cover minimum of 95% surface being immersed Mechanical Shock 100 G’s for 6milliseconds. 5 pulse s Refer to JIS C 5201-1 4.21 ΔR : ± 1.0% Bending Test Glass-Epoxy board thickness : 1.6mm Bending width : 2mm Between the fulcrums : 90mm Refer to JIS C 5201-1 4.33 ΔR : ± 1.0%

TITLE : DOCUMENT NO. SMN60000NH PAGE REV. A 0 UNLESS OTHERWISE SPECIFIED TOLERANCES ON ﹕ X = ± X.X = ± X.XX = ± ANGLES ± HOLE DIA. ± SCALE ﹕ X UNIT ﹕ X APPROVED BY ﹕ DRAWN BY ﹕ connie 4/3/13 DESIGNED BY ﹕ CHECKED BY ﹕ THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY O F Delta Electronics, Inc. AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FO R THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION 台達電子工業股份有限公司台達電子工業股份有限公司台達電子工業股份有限公司台達電子工業股份有限公司 Delta Electronics, Inc . The Engineering Spec. For 1W 0612 Low Resistance Chip Resistor 6. Recommend Land Pattern W L D 1632W 3.3 2.8 1.1 Unit : mm Note : We recommend there is no circuit design Sensing Trace Cu Trace D W

TITLE : DOCUMENT NO. SMN60000NH PAGE REV. A 0 UNLESS OTHERWISE SPECIFIED TOLERANCES ON ﹕ X = ± X.X = ± X.XX = ± ANGLES ± HOLE DIA. ± SCALE ﹕ X UNIT ﹕ X APPROVED BY ﹕ DRAWN BY ﹕ connie 4/3/13 DESIGNED BY ﹕ CHECKED BY ﹕ THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY O F Delta Electronics, Inc. AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FO R THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION 台達電子工業股份有限公司台達電子工業股份有限公司台達電子工業股份有限公司台達電子工業股份有限公司 Delta Electronics, Inc . The Engineering Spec. For 1W 0612 Low Resistance Chip Resistor 7. Packaging 7-1 Dimensions 7-1-1 Tape packaging dimensions 7-1-2 Reel dimensions 2.0 ± 0.5 11.4 ± 1.0 Unit : mm Label 9.0 ± 0.3 22 min. 13.0 ± 0.2 178 ± 2.0 60 ± 1.0 56 ± 2.0 4.0±0.1 1.55±0.05 Carrier cavity Pulling direction B 8.0 ± 0.3 A = 2.0 ± 0.2 B = 3.5 ± 0.1 1.5 max. A 4.0 ± 0.1 Unit : mm 0.3 max. Sprocket hold 2.0 ± 0.1 3.5 ± 0.05 1.75 ± 0.1 1.05 ± 0.05

TITLE : DOCUMENT NO. SMN60000NH PAGE REV. A 0 UNLESS OTHERWISE SPECIFIED TOLERANCES ON ﹕ X = ± X.X = ± X.XX = ± ANGLES ± HOLE DIA. ± SCALE ﹕ X UNIT ﹕ X APPROVED BY ﹕ DRAWN BY ﹕ connie 4/3/13 DESIGNED BY ﹕ CHECKED BY ﹕ THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY O F Delta Electronics, Inc. AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FO R THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION 台達電子工業股份有限公司台達電子工業股份有限公司台達電子工業股份有限公司台達電子工業股份有限公司 Delta Electronics, Inc . The Engineering Spec. For 1W 0612 Low Resistance Chip Resistor 7-2 Peel Strength of Top Cover Tape The peel speed shall be about 300mm/minute The peel force of top cover tape shall between 0.1 to 0.7N 7-3 Number of Taping 4,000 pieces / reel 7-4 Label marking The following items shall be marked on the reel. (1) Type designation (2) Quantity (3) Manufacturing date code (4) Manufacturer’s name (5) The country of origin 165 ~ 180 ° Carrier tape 0.1 ~ 0.7N Top Cover Tape