RL058A RECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) RATINGS Peak One-Cycle Surge Current (Note 2) Off-state Capacitance (Note 1) SYMBOL ITSM CO UNITS 38 3585 Amps pF RL160ARL058A RL065A RL075A RL320ARL190A RL220A RL275A RL160ARL058A RL065A RL075A RL320ARL190A RL220A RL275A 2007-09 CHARACTERISTICS Peak Off-state Voltage @IDRM= 5uA SYMBOL VDRM Switching Voltage @IS= 800mA (Note 3) VS V320 400 160 220 190 260 220 300 275 350 VTMinimum On-state Voltage at 1.0A Volts4 V Holding Current I H 150 mA UNITS NOTES : 1. Off-state capacitance is measured at 10KHz @0.3V with a DC48V bias. 2. Surge rating test standard : 10/100uS. 3. Vs is measured at 100V/uS. 4. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
FEATURES
- Low switching noise * Low forward voltage drop * High current capability * High switching capability * High surge capabitity * High reliability MECHANICAL DATA * Case: Molded plastic * Epoxy: Device has UL flammability classification 94V-O * Lead: MIL-STD-202E method 208C guaranteed * Metallurgically bonded construction * Mounting position: Any * Weight: 0.38 gram Dimensions in inches and (millimeters) .300 (7.6) .230 (5.8) .034 (0.9) MIN. 1.0 (25.4) MIN. DIA. .140 (3.6) .104 (2.6) DIA. DO-15
t, TIME, (uS) TJ, JUNCTION TEMPERATURE, (OC) IPP, PEAK PULSE CURRENT, (% IPP) 0 tr td 100 -V VT VDRM VS IT IS IH IDRM -40 -20 0 60 100 120 14040-8 20 80 160 RATING AND CHARACTERISTICS CURVES ( RL058A THRU RL320A ) FIG.3 NORMALIZED VS CHANGE vs. JUNCTION TEMPERATURE FIG.1 V-I CHARACTERISTICS FIG.2 PULSE WAVE-FORM PERCENT OF VS CHANGE, (%) O C RATIO OF -40 -20 0 60 100 120 1404020 80 160 CASE TEMPERATURE, (OC) 1.0 0.8 IH IH (TC =25OC) 0.6 0.4 1.2 1.4 1.6 1.8 2.0 FIG.4 NORMALIZED DC HOLDING CURRENT vs. CASE TEMPERATURE O C
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE