RL13FTNR020 ETC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Document No. TRL-130S032D Issued Date 2012/11/26 page 1 /9 TA-I TECHNOLOGY CO., LTD Ceramic Substrate 1. Scope : This specification applies for the RL13 (1210) of alloy film chip resistors made by TA-I. 2. Construction: 3. Type Designation: RL 13 F TN R020 Product Code Size Tolera nce Packaging Nominal RL : Chip Resistor Power Rating Resistance Over Coat Ni Plating Sn Plating Resistive Element 4 Digits e.g., (E24) R390=0.39Ω 3 Digits e.g., (E24) R39=0.39Ω TN-Lead Free &Paper Tape F - ±1% G- ±2% J - ±5% 13-1210(3226) 1/2W Conductor
Document No. TRL-130S032D Issued Date 2012/11/26 page 2 /9 TA-I TECHNOLOGY CO., LTD 4. Dimensions: UNIT: mm Type L W C d t 5.Ratings & Characteristics : Characteristics Feature Measurement Method RL13 Power Ratings (W) 1/2W JIS Code 3A / JIS Code 3D Resistance Value (m) 100~910 20 21-50 51-91 Refer to JIS C 5201-1 4.5 T.C.R (ppm/oC) ±200 ±800 ±600 ±400 Refer to JIS C 5201-1 4.8 Operation Temperature Range (oC) -55 ~+155 -55 ~+125 Resistance Tolerance (%) 1%, 2%, 5% JIS C 5201-1- 4.2.5 Insulation Resistance (M) Over 100 Refer to JIS C 5201-1 4.6 Maximum Working Voltage (V) ( P * R)1/2 R020
Document No. TRL-130S032D Issued Date 2012/11/26 page 3 /9 TA-I TECHNOLOGY CO., LTD
5.1 Derating Curve :
For resistors operated at ambient temperature over 70℃ , power rating shall be derated in accordance with figure 1. P max. Ambient Temp. ( C ) Figure 1
5.2 Rated Voltage:
The rated voltage is calculated by the following formula: E = P * R E=Rated Voltage(V) P=Rated Power(W) R=Resistance Value(Ω) Power ratio(%)
Document No. TRL-130S032D Issued Date 2012/11/26 page 4 /9 TA-I TECHNOLOGY CO., LTD 6. Reliability Tests: Test Items Reference standard Condition of Test Test Limits△R/R Temperature Coefficient of Resistance IEC60115-1-4.8 JIS-C5201-1-4.8 -55 ~ +125 ℃ Refer to paragraph 5 Short Time Overload IEC60115-1-4.13 JIS-C5201-1-4.13 2.5 X rated voltage, 5s 1%: (1%+0.005 ) Load Life IEC60115-1-4.25.1 JIS-C5201-1-4.25.1 1000 hours at rated power , 70℃ , 1.5hours “ON “, 0.5hour “OFF” 1%: (1%+0.001 ) Load Life with Humidity IEC60115-1-4.24 JIS-C5201-1-4.24 1000 hours at rated power , 40 2℃, 90~95% RH 1.5hours “ON “, 0.5hour “OFF” 1%: (1%+0.001 ) Rapid Change of Temperature IEC60115-1-4.19 Resistance to Soldering Heat IEC60115-1-4.18 JIS-C5201-1-4.18 270 5℃ solder , 10 1 sec dwell . 1%+0.005 Solderability IEC60115-1-4.17 JIS-C5201-1-4.17 245±5℃ solder, 2±0.5 sec dwell. Solder : Sn96.5 / Ag3.0 / Cu0.5 At least 95% of surface area of electrode shall be covered with new solder. Robustness of Termination (Bending Strength) IEC60115-1-4.33 JIS-C5201-1-4.33 3mm deflection 1%+0.005Ω Resistance to Dry Heat IEC60115-1-4.23.2 Note* :RCWV : Rated continuous working voltage 7. Marking
7.1.1 E96: 1%
Resistance value is expressed by 4 digits, the first “R” means decimal point and the other digits represent for the normal resistance inΩ. e.g., R100 =100 mΩ
7.1.2 E24: 2%,5%
Resistance value is expressed by 3 digits, the first “R” means decimal point and the other digits represent for the normal resistance inΩ. e.g., R10 =100 mΩ
Document No. TRL-130S032D Issued Date 2012/11/26 page 5 /9 TA-I TECHNOLOGY CO., LTD 8. Taping & Reel
8.1 Taping Dimensions
8.1.1 4 mm pitch paper Packing Type A B W F E P1 P2 P0 D0 T Paper +0.1 ψ1.5 0.84 ±0.1 UNIT: mm Type Size Paper Tape 4 mm pitch 178mm/R RL 13 5000
8.2 Reel Specifications
UNIT: mm Series ψA ψB ψC W T
Document No. TRL-130S032D Issued Date 2012/11/26 page 6 /9 TA-I TECHNOLOGY CO., LTD
8.3 Peel – off force :
Peel - off force of paper and blister tape is in accordance with “JIS ” that is , 0.1 to 0.7 N at a peel - off speed of 300 mm / minute. pull top cover tape 300 mm/min 10 ~ 15° standard: 0.1 ~ 0.7 N carrier tape 9. Label
9.1 Manufacture Label :
Date Code Resistance Tolerance Type Lot No: Manufacture Label
9.2 Customer Label ( By customer request ):
Product Spec. Customer No: Date Year Month QTY: 5000 PCS R020 F 30870166K- 0308 RL13FT TA-I TECH LEAD FREE 1210 1%(T) 0.02Ω 105A702723 RL13FTNR020 07.07.02
Document No. TRL-130S032D Issued Date 2012/11/26 page 7 /9 TA-I TECHNOLOGY CO., LTD 10. Recommended land patterns Land pattern Type Size Dimension ( mm ) a b c 11. Recommend IR – Reflow profile : ( Lead-Free solder : Sn96.5 / Ag3 / Cu0.5 )
Document No. TRL-130S032D Issued Date 2012/11/26 page 8 /9 TA-I TECHNOLOGY CO., LTD Profile Feature Lead (Pb )-Free Assembly Average ramp-up rate (Tsmax to Tp) 3℃ / second max. Preheat - Temperature Min (Ts min) - Temperature Max (Tsmax) - Time (Tsmin to Ts max ) (ts) 150℃ 200℃ 60 -150 seconds Time maintained above : - Temperature (T L) - Time (TL) 217℃ 60-120 seconds Peak Temperature (Tp) 260℃ Time within ℃ of actual Peak Temperature (tp)2 10 seconds Ramp-down Rate 6℃/second max. Time 25℃ to Peak Temperature 8mimutes max. Alloyed Re-flow times : 3 times Remark : To avoid discoloration phenomena of chip on terminal electrodes, please use N2 Re-flow furnace . 12. Storage Conditions: Temperature: 5℃~35℃,Humidity:40%~75% 13. Shelf Life: 2 years from manufacturing date 14.ECN Engineering Change Notice: The customer will be informed with ECN if there is significant modification on the characteristics and materials described in Approval Sheet. 15. Manufacturing Country & City : (1) TA-I TECHNOLOGY CO., LTD. ( Taiwan– Tao Yuan ) Tel: (+886)3-3246169 Fax : (+886)3-3246167 (2) TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China – Su Zhou) Tel : (+86)512-63457879 Fax : (+86)512-63457869
Document No. TRL-130S032D Issued Date 2012/11/26 page 9 /9 TA-I TECHNOLOGY CO., LTD Associated companies : (1) FORTUNE TASK RESISTOR FACTORY ( China – Dongguan ) (2) TA-I TECHNOLOGY (DONGGUAN ) CO., LTD. ( China –Dongguan ) (3) TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia – Penang ) Tel : (+60)4- 3900480 Fax : (+60)4-3901481 (4) P.T.TAI ELECTRONICS Indonesia ( Indonesia – Jakarta ) Tel : (+62)21-89830123 Fax : (+62)21-89830703