RL101F DAESAN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Plastic package has Underwriters Laboratory Flammability Classification 94-0
  • Fast switching speed
  • Low forward voltage drop, high efficiency
  • High current capability
  • High reliability Maximum Ratings And Electrical Characteristics
  • Case : A-405 molded plastic body
  • Terminals : Plated axial lead solderable per MIL-STD-750, method 2026
  • Polarity : Color band denotes cathode end
  • Mounting Position : Any
  • Weight : 0.08 ounce, 0.22 gram (Ratings at 25¡É ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) CURRENT 1.0 Amper VOLTAGE 50 to 1000 Volts Notes: (1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A. (2) Measured at 1MHz and applied reverse voltage of 4.0 Volts. Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Volts Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) VDC Maximum average forward rectified current 0.375"(9.5mm) lead length TA=55¡É Maximum instantaneous forward voltage at 1.0A VRRM Volts Symbols Units 1.3VF VRMS 1.0 AmpsIFSM TJ TSTG -65 to +150 Volts Amp Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Operating junction and storage temperature range RL 101F 5.0 250 Volts ¥ìA ns pF I(AV) IR Trr 15.0CJ 100 RL 102F 100 200 RL 103F 140 200 400 RL 104F 280 400 600 RL 105F 420 600 800 RL 106F 560 800 1000 RL 107F 700 1000 Maximum full load reverse current full cycle average. 0.375"(9.5mm) lead length at TA=55¡É 500150 25.0 100.0 Dimensions in inches and (millimeters) A-405 1.0(25.4) MIN. 1.0(25.4) MIN. 0.205(5.2) 0.166(4.2) 0.025(0.6) 0.021(0.5) DIA. 0.107(2.7) 0.080(2.0) DIA.

FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 1250 25 1501007550 175 AVERAGE FORWARD CURRENT(A) AMBIENT TEMPERATURE ( ¡É) SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.2 0.4 0.6 1.0 0.8 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT(AMPERES) INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 0.1 0.01 0.03 0.3 TJ=25¡É Pulse Width=300mS 1% Duty Cycle FIG.5-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE. (V) JUNCTION CAPACITANCE(pF) 100.1 0.2 4 200.4 21 40 100 TJ=25¡É 100 200 FIG.6-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC OSCILLOSCOPE (NOTE1) NON IN- DUCTIVE 50W NON INDUCTIVE 10W NON INDUCTIVE D.U.T. 25Vdc (APPROX) ( + ) Trr 1cm SET TIME BASE FOR 50/100 ns/cm NOTES : 1.Rise Time=7ns max. input impedance=1 megohm 22pF 2.Rise Time=10ns max. source impedance =50 ohms -1.0A +0.5A -0.25A PULSE GENERATOR (NOTE2) FIG.4-TYPICAL REVERSE CHARACTERISTICS PERCENT OF RATED PEAK REVERSE VOLTAGE (%) INSTANTANEOUS REVERSE CURRENT ,(mA) 1000 20 120806040 140 TJ=25¡É 0.01 1.0 0.02 0.1 0.06 0.04 0.6 0.4 0.2 6.0 4.0 2.0 FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT(AMPERES) 8.3m SINGLE HALF SINE WAVE (JEDEC Method) 1 2 1006010864 4020 ( ) RATINGS AND CHARACTERISTIC CURVES RL101F THRU RL107F