RL101FG DAESAN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- High reliability
- Low leakage current
- Low forward voltage drop
- High current capability
- Glass passivated junction
- High switching capagility Maximum Ratings And Electrical Characteristics
- Case : A-405 molded plastic body
- Terminals : Plated axial lead solderable per MIL-STD-750, method 2026
- Polarity : Color band denotes cathode end
- Mounting Position : Any
- Weight : 0.008 ounce, 0.22 gram (Ratings at 25¡É ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) CURRENT 1.0 Ampere VOLTAGE 50 to 1000 Volts Notes: (1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A. (2) Measured at 1MHz and applied reverse voltage of 4.0 Volts. Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Volts Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) VDC Maximum average forward rectified current 0.375"(9.5mm) lead length TA=55¡É Maximum instantaneous forward voltage at 1.0A VRRM Volts Symbols Units 1.3VF VRMS 1.0 AmpsIFSM TJ TSTG -65 to +150 ¡É Volts Amp Maximum DC reverse current at rated DC blocking voltage at TA=25¡É Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Operating junction and storage temperature range RL 101FG 5.0 250 Volts ¥ìA ns pF I(AV) IR Trr 15.0CJ 100 RL 102FG 100 200 RL 103FG 140 200 400 RL 104FG 280 400 600 RL 105FG 420 600 800 RL 106FG 560 800 1000 RL 107FG 700 1000 Maximum full load reverse current full cycle average. 0.375"(9.5mm) lead length at TA=125¡É 500150 30.0 100 Dimensions in inches and (millimeters) A-405 1.0(25.4) MIN. 1.0(25.4) MIN. 0.205(5.2) 0.166(4.2) 0.025(0.6) 0.021(0.5) DIA. 0.107(2.7) 0.080(2.0) DIA.
SET TIME BASE FOR 50/100 ns/cm -1.0A +0.5A -0.25A FIG.1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC OSCILLOSCOPE (NOTE1) NON IN- DUCTIVE 50W NON INDUCTIVE 10W NON INDUCTIVE D.U.T. 25Vdc (APPROX) ( + ) NOTES : 1.Rise Time=7ns max. input impedance=1 megohm 22pF 2.Rise Time=10ns max. source impedance =50 ohms PULSE GENERATOR (NOTE2) ( ) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 1250 25 1501007550 175 AVERAGE FORWARD CURRENT(A) AMBIENT TEMPERATURE ( ¡É) 0.25 0.50 0.75 1.25 1.00 1.50 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD FIG.4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT(AMPERES) INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 0.1 0.01 0.03 0.3 TJ=25¡É Pulse Width=300mS 1% Duty Cycle FIG.5-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE. (V) JUNCTION CAPACITANCE(pF) 100.1 0.2 4 200.4 21 40 100 TJ=25¡É 100 200 FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT(AMPERES) 8.3m SINGLE HALF SINE WAVE (JEDEC Method) 1 10020104 6040862 RATINGS AND CHARACTERISTIC CURVES RF101FG THRU RF107FG