RL0402 YAGEO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 9
Technical content
5%, 2%, 1% sizes 0402/0603/0805/1206/ 1210/1218/2010/2512 RoHS compliant & Halogen Free Product specification – June 01, 2017 V.2
Chip Resistor Surface Mount www.yageo.com Jun. 01, 2017 V.2 Product specification SERIES RL 0402 to 2512 ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC Both part number s are identified by the series, size, tolerance, packing type , temperature coefficient, t aping reel and resistance value. SCOPE This specification describes RL0402 to RL2512 low ohmic chip resistors with lead-free terminations made by thick film process.
APPLICATIONS
Converters Printer equipment Server board Teleco m Consumer Car electronics
FEATURES
AEC-Q200 qualified Halogen Free Epoxy RoHS compliant Hazardous wastes High component and equipment reliability Saving of PCB space Non-forbidden materials used in products /production Low resistances applied to current sensing MSL Class: MSL 1 ORDERING EXAMPLE The ordering code of a R L0603 chip resistor, value 0.56Ω with ±1% tolerance, supplied in 7-inch tape reel is: RL0603FR-070R56L. NOTE 1. All our R-Chip products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) RL XXXX X X X XX XXXX L (1) SIZE 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512 (2) TOLERANCE F = ± 1% G = ± 2% J = ± 5% "-" = Jumper ordering (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE – = Based on spec (5) TAPING REEL 07 = 7 inch dia. Reel and standard power 10 = 10 inch dia. Reel and standard power 13 = 13 inch dia. Reel and standard power 7W = 7 inch dia. Reel and 2 x standard power (0805 and 1206) (6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point. Detailed coding rules of resistance are shown in the table of “Resistance rule of global part number”. (7) DEFAULT CODE Letter L is system default code for order only (Note) Resistance rule of global part number Resistance code rule Example 0RXXX (1 to 976 mΩ) 0R1 = 0.1 Ω 0R12 = 0.12 Ω 0R105 = 0.105 Ω XRXX (1 to 9.76 Ω) 1R = 1 Ω 1R5 = 1.5 Ω 9R76 = 9.76 Ω XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω XXXR (100 to 976 Ω) 100R = 100 Ω XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XMXX (1 to 9.76 MΩ) 1M = 1,000,000 Ω 9M76= 9,760,000 Ω
Chip Resistor Surface Mount www.yageo.com Jun. 01, 2017 V.2 Product specification SERIES RL 0402 to 2512 PPHHYYCCOOMMPP BBRRAANNDD oorrddeerriinngg ccooddeess Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products . GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBE R and ordering example, please refer to page 2. ORDERING EXAMPLE The ordering code of a RL0603 chip resistor, value 0.56 Ω with ±1% tolerance, supplied in tape of 5,000 units per reel is: 235051212567L or RL0603FR-070R56L. NOTE 1. All our R-Chip products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed 12NC CODE 2350 / 2390 / 2322 XXX XXXXX L (1) (2) (3) (4) SIZE TYPE START IN (1) TOL. (%) RESISTANCE RANGE EMBOSSED (2) TAPE ON REEL PAPER/PE (2) TAPE ON REEL (units) 4,000 5,000 10,000 0402 LRC31 2350 ± 5% 0.05 to 1 Ω - - 513 20xxx LRC32 2350 ± 1% 0.05 to 1 Ω - - 513 22xxx 0603 LRC21 2350 ± 5% 0.01 to 1 Ω - 512 10xxx - LRC22 2350 ± 1% 0.01 to 1 Ω - 512 12xxx - 0805 LRC11 2350 ± 5% 0.01 to 1 Ω - 511 10xxx - LRC12 2350 ± 1% 0.01 to 1 Ω - 511 12xxx - LRC11P 2350 ± 1% 0.01 to 1 Ω - 511 15xxx - LRC12P 2350 ± 5% 0.01 to 1 Ω - 511 17xxx - 1206 LRC01 2350 ± 5% 0.01 to 1 Ω - 510 10xxx - LRC02 2350 ± 1% 0.01 to 1 Ω - 510 12xxx - LRC01P 2350 ± 1% 0.01 to 1 Ω - 519 01xxx - LRC02P 2350 ± 5% 0.01 to 1 Ω - 519 1xxxx - 1210 LPRC101 2390 ± 5% 0.01 to 0.0976 Ω - 735 90xxx - LPRC101 2390 ± 5% 0.1 to 1 Ω - 735 60xxx - LPRC102 2390 ± 1% 0.01 to 1 Ω - 735 3xxxx - 1218 LPRC201 2322 ± 5% 0.01 to 1 Ω 735 64xxx - - LPRC201 2322 ± 1% 0.01 to 1 Ω 735 7xxxx - - 2010 LPRC111 2322 ± 5% 0.01 to 0.0976 Ω 760 90xxx - - LPRC111 2322 ± 5% 0.1 to 1 Ω 760 60xxx - - LPRC111 2322 ± 1% 0.01 to 0.0976 Ω 761 90xxx - - LPRC111 2322 ± 1% 0.1 to 1 Ω 761 6xxxx - - 2512 LPRC221 2322 ± 5% 0.01 to 0.0976 Ω 762 90xxx - - LPRC221 2322 ± 5% 0.1 to 1 Ω 762 60xxx - - LPRC221 2322 ± 1% 0.01 to 0.0976 Ω 763 90xxx - - LPRC221 2322 ± 1% 0.1 to 1 Ω 763 6xxxx - - Resistance decade (3) Last digit 0.01 to 0.0976Ω 0 0.1 to 0.976Ω 7 1 to 9.76Ω 8 10 to 97.6Ω 9 100 to 976Ω 1 1 to 9.76 kΩ 2 10 to 97.6 kΩ 3 100 to 976 kΩ 4 1 to 9.76 MΩ 5 10 to 97.6 MΩ 6 Example: 0.02Ω = 0200 or 200 0.3Ω = 3007 or 307 1Ω = 1008 or 108 33 kΩ = 3303 or 333
10 MΩ = 1006 or 106
(1) The resistors have a 12 -digit ordering code starting with 2350/2390/2322. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (In 12NC code, only 07'' tape reel code is supplied. Supply of 10''/13'' tape reel is requested in Global part number ordering code.) (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of “Last digit of 12NC”. (4) Letter L is system default code for order only (Note)
Chip Resistor Surface Mount www.yageo.com Jun. 01, 2017 V.2 Product specification SERIES RL 0402 to 2512 MARKING RL0402 / RL0603: R<100 mΩ EXCEPT 10/20/30/40/50/60 mΩ No marking RL0603: R≥100 mΩ, R = 10/20/30/40/50/60 mΩ E-24 series / Non -E series (R= 25/40/50/60/250/400/500 m Ω):3 digits The “R” is used as a decimal point ; the other 2 digits are significant. RL0805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512 E-24 series / Non-E series (R= 25/40/50/60/250/400/500 m Ω): 4 digits The “R” is used as a decimal point ; the other 3 digits are significant. For further marking information, please see special data sheet “Chip resistors marking ”. Fig. 2 Value = 220 mΩ Fig. 1 Fig. 4 Chip resistor outlines OOUUTTLLIINNEESS For dimension see Table 1 CONSTRUCTION The resistors are constructed out of a high-grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive paste. The composition of the paste is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 4. DIMENSIONS TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) Table 1 For outlines see fig. 4 Fig. 3 Value = 20 mΩ
Chip Resistor Surface Mount www.yageo.com Jun. 01, 2017 V.2 Product specification SERIES RL 0402 to 2512 Type Power P70 Operating Temp. range Resistance range & tolerance T. C. R. ( ppm/°C) Jumper criteria RL0402 1/16W -55°C to +155°C 50mΩ ≤ R < 1Ω See following table “T.C.R.- RL series” Max. resistance 20mΩ Rated current 1.5A RL0603 1/10W 10mΩ ≤ R < 1Ω Max. resistance 20mΩ Rated current 2A RL0805 1/8W 10mΩ ≤ R < 1Ω Max. resistance 20mΩ Rated current 2.5A RL1206 1/4W -55°C to +155°C 10mΩ ≤ R < 1Ω Max. resistance 20mΩ Rated current 3.5A RL1210 1/2W -55°C to +155°C RL1218 1W 10mΩ ≤ R < 1Ω -- -- RL2010 3/4W 10mΩ ≤ R < 1Ω -- -- RL2512 1W 10mΩ ≤ R < 1Ω -- --
ELECTRICAL CHARACTERISTICS
FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting ”. TYPE / RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE RL0402 50mΩ≤R<1Ω 50mΩ≤R<100mΩ 100mΩ≤R<500mΩ 500mΩ≤R<1Ω ± 1000 ppm/°C ± 800 ppm/°C ± 300 ppm/°C RL0603 10mΩ≤R<1Ω 10mΩ≤R≤36mΩ 36mΩ<R≤91mΩ 91mΩ<R≤500mΩ 500mΩ<R<1Ω ± 1,500 ppm/°C ± 1,200 ppm/°C ± 800 ppm/°C ± 300 ppm/°C RL0805 10mΩ≤R<1Ω 10mΩ≤R≤18mΩ 18mΩ<R≤47mΩ 47mΩ<R≤91mΩ 91mΩ<R≤360mΩ 360mΩ<R<500mΩ 500mΩ≤R<1Ω ± 1,500 ppm/°C ± 1,200 ppm/°C ± 1,000 ppm/°C ± 600 ppm/°C ± 300 ppm/°C ± 200 ppm/°C 10mΩ≤R≤18mΩ 18mΩ<R≤47mΩ 47mΩ<R≤91mΩ 91mΩ<R≤360mΩ 360mΩ<R≤500mΩ 500mΩ<R<1Ω RL1206 ± 1,500 ppm/°C ± 1,200 ppm/°C ± 1,000 ppm/°C ± 600 ppm/°C ± 300 ppm/°C ± 200 ppm/°C RL1210 ± 1,500 ppm/°C ± 1,000 ppm/°C ± 800 ppm/°C ± 600 ppm/°C ± 300 ppm/°C ± 200 ppm/°C RL2010 ± 1,500 ppm/°C ± 1,200 ppm/°C ± 1,000 ppm/°C ± 600 ppm/°C ± 300 ppm/°C ± 200 ppm/°C RL2512 ± 1,500 ppm/°C ± 1,200 ppm/°C ± 800 ppm/°C ± 600 ppm/°C ± 300 ppm/°C ± 200 ppm/°C RL1218 10mΩ≤R<1Ω 10mΩ≤R≤30mΩ 30mΩ<R≤56mΩ 56mΩ<R≤180mΩ 180mΩ<R<1Ω ± 2,000 ppm/°C ± 1,000 ppm/°C ± 700 ppm/°C ± 250 ppm/°C
Chip Resistor Surface Mount www.yageo.com Jun. 01, 2017 V.2 Product specification SERIES RL 0402 to 2512 Fig. 5 Maximum dissipation (P max) in percentage of rated power as a function of the operating ambient temperature (T amb) FUNCTIONAL DESCRIPTION OOPPEERRAATTIINNGGTTEEMMPPEERRAATTUURREE RRAANNGGEE Normal Power: Range: –55 °C to +155 °C (Fig. 5) Double Power: Range: –55 °C to +125 °C (Fig. 6) PPOOWWEERR RRAATTIINNGG Each type rated power at 7 0 °C: RL0402=1/16 W; RL0603 =1/10 W; RL0805 =1/8 W, 1/4W; RL12 06=1/4 W, 1/2W; RL1210 =1/2 W; RL1218 =1 W; RL2010 =3/4 W; RL2512 =1 W. RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V = )PxR( Where V = Continuous rat ed DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value (Ω ) Fig. 6 Maximum dissipation (P max) in percentage of rated power as a function of the operating ambient temperature (T amb) PACKING STYLE REEL DIMENSION RL0402 RL0603 RL0805 RL1206 RL1210 RL1218 RL2010 RL2512 Paper taping reel (R) 7" (178 mm) 10,000 5,000 5,000 5,000 5,000 --- --- --- Embossed taping reel (K) 7" (178 mm) --- --- --- --- --- 4,000 4,000 4,000 NOTE 1. For paper/embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity
Chip Resistor Surface Mount www.yageo.com Jun. 01, 2017 V.2 Product specification SERIES RL 0402 to 2512 TESTS AND REQUIREMENTS TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Endurance IEC 60115-1 4.25.1 MIL-STD-202 Method 108A 1,000 hours at 70± 2°C applied RCWV 1.5 hours on, 0.5 hour off, still air required ± (2% +0.5mΩ ) High Temperature Exposure IEC 60068-2-2 1,000 hours at maximum operating temperature depending on specification, unpowered No direct impingement of forced air to the parts Normal power : Tolerances: 155± 5℃ Double power : Tolerances: 125± 5℃ ± (1% +0.5mΩ ) Moisture Resistance MIL-STD-202 Method 106G Each temperature / humidity cycle is defined at 8 hours, 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts ± (2% +0.5mΩ ) Thermal Shock MIL-STD-202 Method 107G -55/+125 °C Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. ± (1% +0.5mΩ ) Short time overload IEC60115-1 4.13 RL standard power: 2.5 times rated voltage for 5 sec at room temperature RL high power: 5 times rated power for 5 sec at room temperature ± (2% +0.5mΩ ) No visible damage Board Flex/ Bending IEC 60115-1 4.33 Device mounted on PCB test board as described, only 1 board bending required 3 mm bending Bending time: 60± 5 seconds Ohmic value checked during bending ± (1% +0.5mΩ ) No visible damage Table 4 Test condition, procedure and requirements
Chip Resistor Surface Mount www.yageo.com Jun. 01, 2017 V.2 Product specification SERIES RL 0402 to 2512 TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting J-STD-002 test B Electrical Test not required Magnification 50X SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245± 3 °C Dipping time: 3± 0.5 seconds Well tinned (≥95% covered) No visible damage - Leaching J-STD-002 test D Leadfree solder, 260 °C, 30 seconds immersion time No visible damage - Resistance to Soldering Heat IEC 60115-1 4.18 Condition B, no pre-heat of samples. Leadfree solder, 260 °C, 10 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol ±( 1% +0.5mΩ ) No visible damage
Chip Resistor Surface Mount www.yageo.com Jun. 01, 2017 V.2 Product specification SERIES RL 0402 to 2512
REVISION HISTORY
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 2 May 31, 2017 - - Add 10" packing Version 1 Dec. 16, 2015 - - Extend 0805 T.C.R. range Version 0 Nov. 11, 2014 - - First issue of this specification