877049 YAGEO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

5%, 2%, 1% sizes 0402/0603/0805/1206/ 1210/1218/2010/2512 RoHS compliant & Halogen Free Product specification – Mar 22, 2010 V.5

Chip Resistor Surface Mount www.yageo.com Mar 22, 2010 V.5 Product specification SERIESRL 0402 to 2512 ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. SCOPE This specification describes RL0402 to RL2512 low ohmic chip resistors with lead-free terminations made by thick film process.

APPLICATIONS

FEATURES

  • Products with lead free terminations meet RoHS requirements - Pb-glass contained in electrodes, resistor element and glass are exempted by RoHS z Reducing environmentally hazardous wastes z High component and equipment reliability z Saving of PCB space z None forbidden-materials used in products/production z Low resistances applied to current sensing O RDERING EXAMPLE The ordering code of a RL0603 chip resistor, value 0.56 X with ±1% tolerance, supplied in 7-inch tape reel is: RL0603FR-070R56L. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed Resistance rule of global part number Resistance code rule Example 0RXXX (1 to 976 mΩ) 0R1 = 0.1 Ω 0R12 = 0.12 Ω 0R105 = 0.105 Ω XRXX (1 to 9.76 Ω) 1R = 1 Ω 1R5 = 1.5 Ω 9R76 = 9.76 Ω XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω XXXR (100 to 976 Ω) 100R = 100 Ω XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XMXX (1 to 9.76 MΩ) 1M = 1,000,000 Ω 9M76= 9,760,000 Ω YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) RL XXXX X X X XX XXXX L (1) SIZE 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512 (2) TOLERANCE F = ±1% G = ±2% J = ±5% (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE – = Base on spec (5) TAPING REEL 07 = 7 inch dia. Reel 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel (6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of “Resistance rule of global part number”. (7) DEFAULT CODE Letter L is system default code for order only (Note) Letter H is Halogen / Lead free (special code on request)

Chip Resistor Surface Mount www.yageo.com Mar 22, 2010 V.5 Product specification SERIESRL 0402 to 2512 PPHHYYCCOOMMPP BBRRAANNDD oorrddeerriinngg ccooddeess Both GLOBAL PART NUMBER (preferred) and 12NC (t raditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBER an d ordering example, please refer to page 2. ORDERING EXAMPLE The ordering code of a RL0603 chip resistor, value 0.56 X with ±1% tolerance, supplied in tape of 5,000 units per reel is: 235051212567L or RL0603FR-070R56L. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed 12NC CODE 2350 / 2390 / 2322 XXX XX XXX L (1) (2) (3) (4) EMBOSSED (2) TAPE ON REEL PAPER/PE (2) TAPE ON REEL (units) SIZE TYPE START IN (1) TOL. (%) RESISTANCE RANGE 4,000 5,000 10,000 0402 LRC31 2350 ±5% 0.05 to 1 Ω - - 513 20xxx LRC32 2350 ±1% 0.05 to 1 Ω - - 513 22xxx 0603 LRC21 2350 ±5% 0.01 to 1 Ω - 512 10xxx - LRC22 2350 ±1% 0.01 to 1 Ω - 512 12xxx - 0805 LRC11 2350 ±5% 0.01 to 1 Ω - 511 10xxx - LRC12 2350 ±1% 0.01 to 1 Ω - 511 12xxx - 1206 LRC01 2350 ±5% 0.01 to 1 Ω - 510 10xxx - LRC02 2350 ±1% 0.01 to 1 Ω - 510 12xxx - 1210 LPRC101 2390 ±5% 0.01 to 0. 0976 Ω - 735 90xxx - LPRC101 2390 ±5% 0.1 to 1 Ω - 735 60xxx - LPRC102 2390 ±1% 0.01 to 1 Ω - 735 3xxxx - 1218 LPRC201 2322 ±5% 0.01 to 1 Ω 735 64xxx - - LPRC201 2322 ±1% 0.01 to 1 Ω 735 7xxxx - - 2010 LPRC111 2322 ±5% 0.01 to 0. 0976 Ω 760 90xxx - - LPRC111 2322 ±5% 0.1 to 1 Ω 760 60xxx - - LPRC111 2322 ±1% 0.01 to 0. 0976 Ω 761 90xxx - - LPRC111 2322 ±1% 0.1 to 1 Ω 761 6xxxx - - 2512 LPRC221 2322 ±5% 0.01 to 0. 0976 Ω 762 90xxx - - LPRC221 2322 ±5% 0.1 to 1 Ω 762 60xxx - - LPRC221 2322 ±1% 0.01 to 0. 0976 Ω 763 90xxx - - LPRC221 2322 ±1% 0.1 to 1 Ω 763 6xxxx - - Resistance decade (3) Last digit 0.01 to 0.0976 X 0 0.1 to 0.976 X 7 1 to 9.76 X 8 10 to 97.6 X 9 100 to 976 X 1 1 to 9.76 kX 2 10 to 97.6 kX 3 100 to 976 kX 4 1 to 9.76 MX 5 10 to 97.6 MX 6 Example: 0.02 X = 0200 or 200

0.3 X = 3007 or 307

1 X = 1008 or 108

33 k X = 3303 or 333

10 M X = 1006 or 106

(1) The resistors have a 12-digit ordering code starting with 2350/2390/2322. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (In 12NC code, only 07'' tape reel code is supplied. Supply of 10''/13'' tape reel is requested in Global part number ordering code.) (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of “Last digit of 12NC”. (4) Letter L is system default code for order only (Note) . Letter H is Halogen / Lead free (special code on request).

Chip Resistor Surface Mount www.yageo.com Mar 22, 2010 V.5 Product specification SERIESRL 0402 to 2512 MARKING RL0805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512 E-24 series / Non-series (R= 25/40/50/60/250/400/500 m Ω): 4 digits The “R” is used as a decimal point; the other 3 digits are significant. RL0603: R≥100 mX IN E-24 SERIES, R = 10/20/30/40/50/60 mΩ 3 digits The “R” is used as a decimal point; the other 2 digits are significant. RL0402 / RL0603: R<100 mX EXCEPT 10/20/30/40/50/60 mΩ No marking For further marking information, please see special data sheet “Chip resistors marking”. Fig. 1 Value = 20 mΩ YNSC005 020 Fig. 2 Value = 22 m Ω YNSC006 Fig. 3 ynsc007 protective coat marking layer resistive layer inner electrode termination (Ni / matte tin) ceramic substrate H YNSC064 W L Fig. 4 Chip resistor outlines OOUUTTLLIINNEESS For dimension see Table 1 CONSTRUCTION The resistors are constructed out of a high-grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive paste. The composition of the paste is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 4. DIMENSIONS TYPE L (mm) W (mm) H (mm) I 1 (mm) I 2 (mm) Table 1 For outlines see fig. 4

Chip Resistor Surface Mount www.yageo.com Mar 22, 2010 V.5 Product specification SERIESRL 0402 to 2512 TYPE / RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE 100mX≤R<500mX 500mX≤R<1X RL0402 100mΩ≤R<1Ω ±800 ppm/°C ±300 ppm/°C 10mX≤R≤36mX 36mX<R≤91mX 91mX<R≤500mX 500mX<R<1X RL0603 10mΩ≤R<1Ω ±1,500 ppm/°C ±1,200 ppm/°C ±800 ppm/°C ±300 ppm/°C 10mX≤R≤18mX 18mX<R≤47mX 47mX<R≤91mX 91mX<R≤360mX 360mX<R≤500mX 500mX<R<1X RL0805 ±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/° C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C RL1206 ±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/° C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C RL1210 ±1,500 ppm/°C ±1,000 ppm/°C ±800 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C RL2010 ±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/° C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C RL2512 10mΩ≤R<1Ω ±1,500 ppm/°C ±1,200 ppm/°C ±800 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C 10mX≤R≤30mX 30mX<R≤56mX 56mX<R≤180mX 180mX<R<1X RL1218 10mΩ≤R<1Ω ±2,000 ppm/°C ±1,000 ppm/°C ±700 ppm/°C ±250 ppm/°C

ELECTRICAL CHARACTERISTICS

FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”. PACKING STYLE REEL DIMENSI ON RL0402 RL0603 RL0805 RL1206 RL1210 RL1218 RL2010 RL2512 Paper taping reel (R) 7" (178 mm) 10,000 5,000 5,000 5,000 5,000 --- --- --- Embossed taping reel (K) 7" (178 mm) --- --- --- --- --- 4,000 4,000 4,000 NOTE 1. For paper/embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity

Chip Resistor Surface Mount www.yageo.com Mar 22, 2010 V.5 Product specification SERIESRL 0402 to 2512 P handbook, halfpage MLB206_1 70 10055 50 Tamb( C)o (%P ) rated 100 125 Fig. 5 Maximum dissipation (P max) in percentage of rated power as a function of the operating ambient temperature (T amb) FUNCTIONAL DESCRIPTION OOPPEERRAATTIINNGGTTEEMMPPEERRAATTUURREE RRAANNGGEE Range: –55 °C to +125 °C PPOOWWEERR RRAATTIINNGG Each type rated power at 70 °C: RL0402=1/16 W; RL0603=1/10 W; RL0805=1/8 W; RL1206=1/4 W; RL1210=1/2 W; RL1218=1 W; RL2010=3/4 W; RL2512=1 W. R ATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V = √(P X R ) Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value (X)

Chip Resistor Surface Mount www.yageo.com Mar 22, 2010 V.5 Product specification SERIESRL 0402 to 2512 TESTS AND REQUIREMENTS TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Endurance IEC 60115-1 4.25.1 1,000 hours at 70±5 °C applied RCWV 1.5 hours on, 0.5 hour off, still air required ±2% High Temperature Exposure/ Endurance at upper category temperature IEC 60068-2-2 1,000 hours at maximum operating temperature depending on specification, unpowered No direct impingement of forced air to the parts Tolerances: 125±5 °C ±1% Moisture Resistance MIL-STD-202G Method-106G Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24±2 hours after test conclusion ±2% Thermal Shock MIL-STD-202G Method-107G -55/+125 °C Note: Number of cycles required is 300. Devices unmounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air ±1% Short time overload IEC60115-1 4.13 2.5 times RCWV or maximum overload voltage whichever is less for 5 sec at room temperature ±2% No visible damage Board Flex/ Bending IEC 60068-2-21 Device mounted on PCB test board as described, only 1 board bending required 3 mm bending Bending time: 60±5 seconds Ohmic value checked during bending ±1% No visible damage Table 4 Test condition, procedure and requirements

Chip Resistor Surface Mount www.yageo.com Mar 22, 2010 V.5 Product specification SERIESRL 0402 to 2512 TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting IPC/JEDECJ-STD-002B test B Electrical Test not required Magnification 50X SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245±3 °C Dipping time: 3±0.5 seconds Well tinned (≥95% covered) No visible damage - Leaching IPC/JEDECJ-STD-002B test D Leadfree solder, 260 °C, 30 seconds immersion time No visible damage - Resistance to Soldering Heat IEC 60068-2-58 Condition B, no pre-heat of samples. Leadfree solder, 260 °C, 10 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol ±1% No visible damage

Chip Resistor Surface Mount www.yageo.com Mar 22, 2010 V.5 Product specification SERIESRL 0402 to 2512

REVISION HISTORY

“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 5 Mar 22, 2010 - - The statement of "Halogen Free" on the cover added - Test methods updated Version 4 Dec 11, 2008 - - Halogen Free Epoxy - Update global part number definition Version 3 Aug 07, 2008 - - Change to dual bran d datasheet that describe RL0402 to RL2512 with RoHS compliant - Define global part number Version 2 Jul 15, 2005 - - Ordering example revised Version 1 Apr 15, 2005 - - Size 1218 extended - Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape) Version 0 Nov. 10, 2003 - - First issue of this specification