RK1-12V NAIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1.5 GHz MICROWAVE RELAY

11.2 .441 9.7 .382 20.2 .795

  • Excellent high frequency characteristics Isolation: Min. 60dB (at 1.5 GHz) Insertion loss: Max. 0.3dB (at 900 MHz)
  • High sensitivity in small size Size: 20.2 11.2 9.7 mm .795 .441 .382 inch Nominal power consumption: 200 mW (single side stable type)
  • Sealed construction for automatic cleaning
  • Latching types are also available Arrangement Contact Coil (at 25°C, 68°F) Contact material Max. switching voltage Isolation Max. switching current Insertion loss

0.01 A 24 V DC

10 W 1.2 GHz 3·105 105 V.S.W.R. Min. 60 dB (at 1.5 GHz) Max. 0.3 dB (at 900 MHz) Max. 1.5 (at 900 MHz) 2 coil latching Single side stable 200 mW Nominal operating power 1 coil latching 400 mW 200 mW Initial contact resistance, max. (By HP4328A)

1 Form C

Impedance 50W ) Expected life (min. operations) 5·10 Electrical Mechanical Rating Max. switching power

30 V DC

0.5 A

0.01 A 24 V DC 10 W (at

1.2 GHz, Impedance 50W )

Initial insulation resistance*1 Operate time [Set time]*3 (at nominal voltage)Approx. 6 ms [Approx. 5ms] Max. 60°Cwith nominal coil voltage across coil and at nominal switching capacity Temperature rise Initial breakdown voltage* Between open contacts Between contact and coil Between contact and earth terminal

500 Vrms

1,000 Vrms Min. 100 MW at 500 V DC Shock resistance Vibration resistance Unit weight Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms, detection time: 10ms *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10ms Approx. 4.4 g .155 oz Min. 196 m/s2 {20 G} Min. 980 m/s2 {100 G} Functional*4 Destructive*5 Functional*6 Destructive 10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm Conditions for operation, transport and storage (Not freezing and condensing at low temperature) Ambient temp. Humidity –40°C to 60°C –40°F to 140°F 5 to 85% R.H. Release time (without diode) [Reset time]*3 (at nominal voltage) *2 Approx. 3 ms [Approx. 5ms] TYPICAL

APPLICATIONS

  • Audio visual equipment broadcast satellite tuners VCRs, CATVs, TVs
  • Communication equipment automobile telephones maritime telephones
  • Instrumentation test equipment measuring equipment

ORDERING INFORMATION

1Ex. RK L2 Contact arrangement 1: Standard type 1R: R type (See Schematic on next page.) Note: Standard packing; Carton: 50 pcs. Case 500 pcs. Nil: Single side stable L: 1 coil latching L2: 2 coil latching 24 V Operating function Coil voltage, DC 24V SPECIFICATIONS

Part No. RK1-3V 3 2.25 0.3 45 66.7 200 200 3.3 5 3.75 0.5 125 40 .7 200 5.5 6 4.5 0.6 180 33.3 200 6.6 9 6.75 0.9 405 22.2 200 9.9 12 9 1.2 720 16.7 200 13.2 RK1-5V RK1-6V RK1-9V RK1-12V 24 18 2.4 2,880 8.3 200 26.4RK1-24V RK1R-3V RK1R-5V RK1R-6V RK1R-9V RK1R-12V RK1R-24V Nominal voltage, V DC Pick-up voltage, max. V DC Drop-out voltage, min. V DC Coil resistance, W (–10%) Nominal operating current, mA Nominal operating power, mW Maximum. allowable voltage, V DC (at 60°C 140°F)

  • Single side stable type Part No. RK1-L-3V 3 2.25 2.25 45 66.7 200 3.3 5 3.75 3.75 125 40 200 5.5 6 4.5 4.5 180 33.3 200 6.6 9 6.75 6.75 405 22.2 200 9.9 12 9 9 720 16.7 200 13.2 RK1-L-5V RK1-L-6V RK1-L-9V RK1-L-12V 24 18 18 2.25 3.75 4.5 6.75 2,880 8.3 200 26.4RK1-L-24V RK1R-L-3V RK1R-L-5V RK1R-L-6V RK1R-L-9V RK1R-L-12V RK1R-L-24V Nominal voltage, V DC Set voltage, max. V DC Reset voltage, max. V DC Coil resistance, W (–10%) Nominal operating current, mA Nominal operating power, mW Maximum. allowable voltage, V DC (at 60°C 140°F)
  • 1 coil latching type Part No. RK1-L2-3V 3 2.25 22.5 133.3 400 3.3 5 3.75 62.5 80 400 5.5 6 4.5 90 66.7 400 6.6 9 6.75 202.5 44.4 400 9.9 12 9 360 33.3 400 13.2 RK1-L2-5V RK1-L2-6V RK1-L2-9V RK1-L2-12V 24 18 1,440 16.7 400 26.4RK1-L2-24V RK1R-L2-3V RK1R-L2-5V RK1R-L2-6V RK1R-L2-9V RK1R-L2-12V RK1R-L2-24V Nominal voltage, V DC Set voltage, max. V DC Reset voltage, max. V DC Coil resistance, W (–10%) Nominal operating current, mA Nominal operating power, mW Maximum. allowable voltage, V DC (at 60°C 140°F)
  • 2 coil latching type –1 +7 N.C. COM N.O. 13 12 11 10 9 8 Standard contact arrangement PC board pattern (Copper-side view) Schematic (Bottom view) mm inch RK1 Single side stable (Deenergized condition)7.62 .300 10-0.9 dia. 10-.035 dia. 2.54 .100 2.54 .100 (2 coil latching) Tolerance: –0.1 –.0033-0.6·0.3 3-.024·.012 4-0.6·0.25 4-.024·.010 3-0.45 3-.018 Stand-off (2 coil latching) General tolerance: –0.3 –.012 +–+ RESET COM SET 13 12 11 10 9 8 RK1-L2 2 coil latching (Reset condition) +–+ SET COM RESET 13 12 11 10 9 8 RK1R-L2 +1 –7 SET COM RESET 13 12 11 10 9 8 RK1R-L –1 +7 N.O. COM N.C. 13 12 11 10 9 8 R type contact arrangement RK1R 7.62 .300 9-0.9 dia. 9-.035 dia. 2.54 .100 2.54 .100 (Single side stable and 1 coil latching) 2-0.6·0.3 2-.024·.012 4-0.6·0.25 4-.024·.010 3-0.45 3-.018 Stand-off (Single side stable and 1 coil latching) +1 –7 RESET COM SET 13 12 11 10 9 8 RK1-L 1 coil latching (Reset condition) 9.1 .358 7.62 .300 3.5 .138 2.54 .100 0.6 .024 20.2 .795 11.2 .441 TYPES ANE COIL DATA (at 20°C 68°F) DIMENSIONS

1.-(1) High frequency characteristics (Impedance 75 W Sample: RK1-12V Measuring method: Measured with HP network analyzer (HP8753C)

  • Insertion loss characteristics • Isolation characteristics • V.S.W.R. characteristics 0.8 1.0 0.2 0.6 0.4 300kHz 1.5GHz 3GHz COM-NC COM-NO Frequency Insertion loss, dB 100 300kHz 1.5GHz 3GHz COM-NC COM-NO Frequency Isolation, dB 1.2 1.0 2.0 1.8 1.4 1.6 300kHz 1.5GHz 3GHz COM-NO COM-NC Frequency V.S.W.R. 1.-(2) High frequency characteristics (Impedance 50 W Sample: RK1-5V Measuring method: Measured with HP network analyzer (HP8753C)
  • Insertion loss characteristics • Isolation characteristics • V.S.W.R. characteristics 0.8 1.0 0.2 0.6 0.4 300kHz 1.5GHz 3GHz COM-NC COM-NO Frequency Insertion loss, dB 100 300kHz 1.5GHz 3GHz COM-NC COM-NO Frequency Isolation, dB 1.2 1.0 2.0 1.8 1.4 1.6 300kHz 1.5GHz 3GHz COM-NO COM-NC Frequency V.S.W.R. 2. Coil temperature rise Sample: RK1-12V, RK1-L-12V, RK1-L2-12V No. of samples: n = 6 Carrying current: 10 mA Ambient temperature: 25°C 77°F 3.-(1) Operate/Release time (Single side stable) Sample: RK1-12V; No. of samples: n = 6 3.-(2) Set/Reset time (Latching) Sample: RK1-L-12V, RK1-L2-12V No. of samples: n = 12 100 80 100 130 150 RK1-L2-12V RK1-12V, RK1-L-12V Voltage applied to coil, %V Temperature rise, °C 80 100 120 150 Max. Min. Max. Min. Voltage applied to coil, %V Operate/Reset time, ms Operate time Release time 80 100 130 Max. Min. Max. Min. Set time Reset time Voltage applied to the coil (%V) Set/Reset time, ms

4.-(1) Mechanical life test (Single side stable) Sample: RK1-12V; No. of samples: n = 12 4.-(2) Mechanical life test (Latching) Sample: RK1-L2-12V No. of samples: n = 12 4.-(3) Mechanical life test Sample: RK1-12V No. of samples: n = 20 (20 2 contacts) 100 500 1,000 Min. Max. Min. Max. No. of operations, ·10 Pick-up/drop-out voltage, V Pick-up voltage Drop-out voltage 100 500 1,000 Min. Max. No. of operations, ·10 Set/Reset voltage, V 100 150 200 250 300 50 100 500 1,000 Min. Max. No. of operations, ·10 Contact resistance, mW 5. Electrical life test (0.01 A 24 V DC) Sample: RK1-12V; No. of samples: n = 6 6. Ambient temperature characteristics Sample: RK1-12V; No. of samples: n = 6 7. Contact resistance distribution (initial) Sample: RK1-12V No. of samples: n = 50 (50 2 contacts) 10 20 30 Min. Max. Min. Max. No. of operations, ·10 Pick-up/drop-out voltage, V Pick-up voltage Drop-out voltage –40 –40 –20 0 20 –20 –40 Rate of change, % Ambient temperature, °C °F 104 140 176 Pick-up voltage Drop-out voltage 10 20 30 40 50 Contact resistance, mW Quantity 8.-(1) Influence of adjacent mounting Sample: RK1-12V; No. of sample: n = 10 8.-(2) Influence of adjacent mounting Sample: RK1-12V; No. of samples: n = 10 –10 –10 .197 .394 ON ON OFF OFF OFF condition ON condition Inter-relay distance, (mm, inch) Rate of change, % Rate of change, % Pick-up voltage Drop-out voltage ON ON OFF OFF –10 –10 .197 .394 OFF condition Inter-relay distance, (mm, inch) Rate of change, % Rate of change, % ON condition Drop-out voltage Pick-up voltage NOTES 1. Soldering Perform soldering under the conditions below.

  • Within 10 s at 260°C 500°F
  • Within 3 s at 350°C 662°F 2. Latching relay In order to assure proper operating re- gardless of changes in the ambient usage temperature and usage conditions, nomi- nal operating voltage should be applied to the coil for more than 30 ms to set/reset the latching type relay. For Cautions for Use, see Relay Technical Information (Page 48 to 76). 9/1/2000 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. Go To Online Catalog