RH4565TR-2

1N4584 MICROSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

ed Zener 6.4 Volt Temperature Compensat Reference Diodes Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1Copyright  2003 10-27-2003 REV B WWW.Microsemi .COM SCOTTSD A L E DIVISION 1N4565 thru 1N4584A-1 DO-7 1N4565(A)(-1) thru 1N4584(A)(-1) DO-7 DESCRIPTION APPEARANCE The popular 1N4565 thru 1N4584A-1 series of Ze ro-TC Reference Diodes provides a selection of both 6.4 V nominal volta ges a nd te mperature coefficients to a s lo w a s 0.000 5%/oC for minimal voltage ch ange with temperature. Four different operating currents are available for selection at reference diodes are internal-metallurgical-bonded and are also available in JAN, JANTX, and JA NTXV military qua lifications. Microsemi al so offers numerous ot her Ze ner Reference Diode pro ducts for a variety of other voltages up to 200 V. DO-7 (DO-204AA) IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES APPLICATIONS / BENEFITS

• JEDEC registered 1N4565 thru 1N4584 series .
• Reference voltage diodes of nominal 6.4 V +/- 5% with tighter tolerance options available
• Temperature Coefficient range: 0.01%/oC to 0.0005%/oC.
• Zener Test Current selection range: 0.500 mA, 1.00 mA, 2.00 mA and 4.00 mA.
• Internal metallurgical bonded
• 1N4565 thru 1N4584 also have qualification to MIL- PRF-19500/452 by adding the JAN, JANTX, JANTXV, or JANS prefixes to part numbers a well as the “-1” suffix; e.g. JANTX1N4574A-1, etc.
• Military surface mount equivalents also available in DO-213AA by adding UR-1 suffix and the JAN, JANTX, and JANTXV prefix, e.g. JANTX1N4569AUR-1 (see separate data sheet)
• Also available in DO-35 package including military qualifications up to JANTXV (see separate data sheet)
• Provides minimal voltage change over a broad operating temperature range for instrumentation and other circuit designs requiring a voltage reference
• Temperature coefficient selections available from 0.01%/ºC to 0.0005%/ºC
• Tight reference voltage tolerances available with nominal value of 6.4 V by adding tolerance 1%, 2%, 3%, etc. after the part number for identification, e.g.
• Flexible axial-leaded mounting terminals
• Nonsensitive to ESD per MIL-STD-750 Method 1020 MAXIMUM RATINGS MECHANICAL AND PACKAGING
• Operating Temperatures: -65oC to +175oC
• Storage Temperatures: -65oC to +175oC
• DC Power Dissipation: 500 mW @ TL = 25oC with maximum current IZM 70 mA. NOTE: For optimum voltage-temperature stability, the operating test current (IZT) should be as specified in the Electrical Characteristics Table (power less than 30 mW)
• Solder Temperatures: 260oC for 10 s (max)
• CASE: Hermetically sealed glass case. DO-7 (DO- 204AA) package
• TERMINALS: Leads, tin-lead plated solderable per MIL-STD-750, Method 2026
• MARKING: Part number and cathode band
• POLARITY: Reference diode to be operated with the banded end positive with respect to the opposite end
• TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number)
• WEIGHT: 0.2 grams.
• See package dimensions on last page

6.4 Volt Temperature Compensated Zener

1N4565 thru 1N4584A-1 DO-7 WWW.Microsemi .COM 1N4565(A)(-1) thru 1N4584(A)(-1) DO-7 *ELECTRICAL CHARACTERISTICS @ 25oC, unless otherwise specified MAXIMUM VOLTAGE TEMPERATURE COEFFICIENT JEDEC TYPE Number (Notes 1, 4 & 5) ZENER TEST CURRENT (Note 3) IZT mA αVZ +/- %/oC +/- mV/oC Temp. Range MAXIMUM REVERSE CURRENT IR @ 3 V µA MAX. DYNAMIC IMPEDANCE (Note 2) ZZT @ IZT OHMS 1N4565 1N4565A .01 .01 .64 .64 0 to +75oC -55 to +100oC 2.0 2.0 200 200 1N4566 1N4566A .005 .005 .32 .32 0 to +75oC -55 to +100oC 2.0 2.0 200 200 1N4567 1N4567A .002 .002 .13 .13 0 to +75oC -55 to +100oC 2.0 2.0 200 200 1N4568 1N4568A .001 .001 .06 .06 0 to +75oC -55 to +100oC 2.0 2.0 200 200 1N4569 1N4569A .0005 .0005 .03 .03 0 to +75oC -55 to +100oC 2.0 2.0 200 200 1N4570 1N4570A .01 .01 .64 .64 0 to +75oC -55 to +100oC 2.0 2.0 100 100 1N4571 1N4571A 1.0 1.0 .005 .005 .32 .32 0 to +75oC -55 to +100oC 2.0 2.0 100 100 1N4572 1N4572A 1.0 1.0 .002 .002 .13 .13 0 to +75oC -55 to +100oC 2.0 2.0 100 100 1N4573 1N4573A 1.0 1.0 .001 .001 .06 .06 0 to +75oC -55 to +100oC 2.0 2.0 100 100 1N4574 1N4574A 1.0 1.0 .0005 .0005 .03 .03 0 to +75oC -55 to +100oC 2.0 2.0 100 100 1N4575 1N4575A 2.0 2.0 .01 .01 .64 .64 0 to +75oC -55 to +100oC 2.0 2.0 1N4576 1N4576A 2.0 2.0 .005 .005 .32 .32 0 to +75oC -55 to +100oC 2.0 2.0 1N4577 1N4577A 2.0 2.0 .002 .002 .13 .13 0 to +75oC -55 to +100oC 2.0 2.0 1N4578 1N4578A 2.0 2.0 .001 .001 .06 .06 0 to +75oC -55 to +100oC 2.0 2.0 1N4579 1N4579A 2.0 2.0 .0005 .0005 .03 .03 0 to +75oC -55 to +100oC 2.0 2.0 1N4580 1N4580A 4.0 4.0 .01 .01 .64 .64 0 to +75oC -55 to +100oC 2.0 2.0 1N4581 1N4581A 4.0 4.0 .005 .005 .32 .32 0 to +75oC -55 to +100oC 2.0 2.0 1N4582 1N4582A 4.0 4.0 .002 .002 .13 .13 0 to +75oC -55 to +100oC 2.0 2.0 1N4583 1N4583A 4.0 4.0 .001 .001 .06 .06 0 to +75oC -55 to +100oC 2.0 2.0 1N4584 1N4584A 4.0 4.0 .0005 .0005 .03 .03 0 to +75oC -55 to +100oC 2.0 2.0 *JEDEC Registered Data. NOTES: 1. When ordering devices with tighter tolerances than specified for the VZ voltage nominal of 6.40V, add a hyphened suffix to the part number for desired tolerance, e.g. 1N4569A-2%, 1N4574A-1-1%, 1N4579-1-2%, 1N4584A-1-3%, etc. 2. Zener impedance is measured by superimposing 0.75 mA ac rms on 7.5 mA dc @ 25 o 3. Voltage measurements to be performed 15 seconds after application of dc test current IZT. 4. 1N4565 thru 1N4584 also have qualification to MIL-PRF-19500/452 by adding the JAN, JANTX, JANTXV, or JANS prefixes to part numbers as well as the “-1” suffix; e.g. JANTX1N4569A-1, JANTXV1N4574A-1, etc. 5. Designate Radiation Hardened devices with “RH” prefix instead of “1N,” i.e., RH4584A. Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2Copyright  2003 10-27-2003 REV B

1N4565 thru 1N4584A-1 DO-7 WWW.Microsemi .COM 1N4565(A)(-1) thru 1N4584(A)(-1) DO-7 GRAPHS Typical change of Typical Change Temperature Coefficient in Zener Voltage with change in with change in Operating Current Operating Current ∆TC (mV/ºC) ∆TC (%/ºC ∆VZ (mV) I Z – Operating Current (mA) IZ – Operating Current (mA) 1N4565 – 1N4569A ∆TC (mV/ºC) ∆TC (%/ºC ∆VZ (mV) I Z – Operating Current (mA) IZ – Operating Current (mA) 1N4570 – 1N4574A ∆TC (mV/ºC) ∆TC (%/ºC ∆VZ (mV) I Z – Operating Current (mA) IZ – Operating Current (mA) 1N4575 – 1N4579A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3Copyright  2003 10-27-2003 REV B

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4Copyright  2003 10-27-2003 REV B WWW.Microsemi .COM SCOTTSD A L E DIVISION 1N4565 thru 1N4584A-1 DO-7 1N4565(A)(-1) thru 1N4584(A)(-1) DO-7 ∆TC (mV/ºC) ∆TC (%/ºC ∆VZ (mV) I Z – Operating Current (mA) IZ – Operating Current (mA) 1N4580 – 1N4584A PACKAGE DIMENSIONS All dimensions in INCH mm