RFU620-10100 SICK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

A B C D E F H I J K L M N O P Q R S T RFU620-10100 | RFU62x RFID

Ordering information

Type Part no. RFU620-10100 1062599 Other models and accessories www.sick.com/RFU62x Detailed technical data

Features

Product category Write/read device with integrated antenna Radio approval Europe (ETSI EN 302 208-2 V1.4.1) South Africa (ETSI EN 302 208-2 V1.4.1) Frequency band UHF (860 MHz ... 960 MHz) Output power 0.25 W (ERP, 24 dBm) RFID standard EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C Modulation PR-ASK Connection type Ethernet MTBF 23 years Heating Yes Scanning range Max. 1 m 1) Antenna Integrated (circular polarized, axial ration typ. 2 dB, 100° field opening, front to back ratio > 7 dB) Service functions Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620 Further functions Cloning function (microSD memory card or system), diagnosis, updatable firmware, freely pro- grammable data output format, Heartbeat, triggering, SICK AppSpace functionalities can be enabled with the SD card accessory SDK6U-P00100 1) Depending on transponder used and ambient conditions. Interfaces Ethernet ✔, TCP/IP Function Host, AUX Data transmission rate 10/100 MBit/s

2 IDENTIFICATION SOLUTIONS | SICK Online data sheet | 2017-05-12 06:56:32

Subject to change without notice

RFU620-10100 | RFU62x RFID PROFINET ✔ Function PROFINET Single Port, PROFINET Dual Port (optional via external connection module CDF600-2) Data transmission rate 10/100 MBit/s EtherNet/IP™ ✔ Data transmission rate 10/100 MBit/s Serial ✔, RS-232, RS-422, RS-485 CAN ✔ Remark CSN (SICK CAN Sensor Network) Function Host PROFIBUS DP ✔ Type of fieldbus integration Optional over external fieldbus module CDF600-2 DeviceNet™ ✔ Type of fieldbus integration Optional available externally Switching inputs 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/ CDM420) Switching outputs 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/ CDM420) Optical indicators 11 LEDs (function configurable via SOPAS ET, alternatively controlling with sw commands, sta- tus displays) Configuration software SOPAS ET Mechanics/electronics Electrical connection 1 x M12, 17-pin male connector 1 x M12, 4-pin Ethernet female connector Operating voltage 10 V DC ... 30 V DC 1) Power consumption 8 W, with heating typ. 16 W Housing Aluminum die cast Plastic (PPS) Enclosure rating IP67 Protection class III Weight 780 g Dimensions (L x W x H) 137 mm x 131 mm x 56 mm 1) With heating 20 V DC ... 30 V DC. Ambient data Electromagnetic compatibility (EMC) EN 61000-6-3 (2007) + A1 (2011) / EN 61000-6-2 (2005) Vibration resistance EN 60068-2-6 (2008-02) Shock resistance EN 60068-2-27 (2009-05) Ambient operating temperature –40 °C ... +50 °C Storage temperature –40 °C ... +70 °C Permissible relative humidity 90 %, Non-condensing Classifications ECl@ss 5.0 27280401 2017-05-12 06:56:32 | Online data sheet Subject to change without notice IDENTIFICATION SOLUTIONS | SICK 3

A B C D E F H I J K L M N O P Q R S T RFU620-10100 | RFU62x RFID ECl@ss 5.1.4 27280401 ECl@ss 6.0 27280401 ECl@ss 6.2 27280401 ECl@ss 7.0 27280401 ECl@ss 8.0 27280401 ECl@ss 8.1 27280401 ECl@ss 9.0 27280401 ETIM 6.0 EC002998 UNSPSC 16.0901 52161523

4 IDENTIFICATION SOLUTIONS | SICK Online data sheet | 2017-05-12 06:56:32

Subject to change without notice

RFU620-10100 | RFU62x RFID Dimensional drawing (Dimensions in mm (inch)) RFU62x Ready Result RF Data CAN LNK/ACT Micro-SD Micro-SD Result RF Data CAN LNK/ACT Ready 100° 34.4 (1.35) 20.1 (0.79) 20.1 (0.79) 20.1 (0.79) 50 (1.97) (0.98) (0.98) 130.8 (5.15) 130.8 (5.15) 6 x 7.7 (0.30) 137.4 (5.41) 54 (2.13) 18.1 (0.71) 55.3 (2.18) 7 (0.28) (1.18) 25.5 (1.00) 71.9 (2.83) 76.7 (3.02) 71.9 (2.83) 71.9 (2.83) 76.9 (3.03) 69.7 (2.74) 1 2 ß à á â ã 113.9 (4.48) 103.3 (4.07) 116 (4.57) RFU620-101xx RFU620-105xx RFU620-104xx RFU620-101xx RFU620-105xx RFU620-104xx ① “Power/AUX/CAN/I/O” connection, 17-pin M12 male connector, A-coded ② “Ethernet” connection, 4-pin M12 female connector, D-coded ③ “Ethernet” connection, 8-pin M12 female connector, X-coded ④ “Power/HOST/AUX/CAN/I/O” connection, 15-pin D-Sub HD male connector, cable 0,9 m ⑤ 4 x LED multi-color (process feedback) ⑥ 7 x LED for status display ⑦ Cover with integrated antenna ⑧ Screw (Torx T8), captive (2 x), for side cover ⑨ Side cover opened ⑩ USB socket, type Micro-B ⑪ Slot for microSD memory card ⑫ Blind hole thread M5, 9 mm deep (4 x), for alternatively mounting ⑬ Pressure compensation valve (venitlation element) ⑭ M6 blind tapped holes, 7 mm deep (2 x), for mounting 2017-05-12 06:56:32 | Online data sheet Subject to change without notice IDENTIFICATION SOLUTIONS | SICK 5

A B C D E F H I J K L M N O P Q R S T RFU620-10100 | RFU62x RFID Radiation pattern –28 –25 –22 –19 –16 –13 –10 0° 15° 30° 45° 60° 75° 90° 105° 120° 135° 150° 165°180°–165° –150° –135° –120° –105° –90° –75° –60° –45° –30° –15° Measured antenna gain in dBic at 868.5 MHz, RHCP (right-hand circular polarized) Elevation plane (vertical) Azimuth plane (horizontal) Recommended accessories Other models and accessories www.sick.com/RFU62x Brief description Type Part no. Mounting brackets and plates Simple mounting bracket Mounting bracket 2071067 Modules Small connection module for one sensor, 4 cable glands, base for CMC600 CDB620-001 1042256 Fieldbus proxy/gateway for connecting identification sensors to PROFIBUS-DP networks (PROFIBUS interface: 2 x M12, male connector/female connector, 5-pin) CDF600-2100 1058965 Fieldbus proxy/gateway for connecting one identification sensor to PROFINET-IO net- works (interface 2 x M12, female connector/female connector, 4-pin) CDF600-2200 1062460 Plug connectors and cables Head A: female connector, M12, 17-pin, straight Head B: male connector, D-Sub-HD, 15-pin, straight Cable: Power, serial, CAN, digital I/Os, shielded, 2 m Connection cable (male connector - female connector) 2055419

6 IDENTIFICATION SOLUTIONS | SICK Online data sheet | 2017-05-12 06:56:32

Subject to change without notice

RFU620-10100 | RFU62x RFID Brief description Type Part no. Head A: male connector, M12, 4-pin, straight, D-coded Head B: male connector, RJ45, 8-pin, straight Cable: Ethernet, twisted pair, PUR, halogen-free, shielded, 2 m SSL-2J04-G02ME 6034414 Head A: male connector, USB-A Head B: male connector, Micro-B Cable: USB 2.0, unshielded, 2 m USB cable 6036106 Storage media Code for activating the SICK AppSpace functions. MicroSD memory card with 1 GB for industrial use. SDK6U-P00100 SICK AppSpace 1076012 RFID transponder UHF transponder, global, thermoplastic, 51.5 mm x 47.5 mm x 10 mm, Impinj Monza 4 QT On-metal transpon- der (52 mm x 48 mm x 10 mm) 6052346 2017-05-12 06:56:32 | Online data sheet Subject to change without notice IDENTIFICATION SOLUTIONS | SICK 7

SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com