RFTIP2012090T88Q1C WALSIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Page 1 of 8 ASC_RFTIP2012090T88Q1C_V01 Dec. 2015 RFTIP Series – 2012(0805)- RoHS Compliance MULTILAYER CERAMIC TRIPLEXER Halogens Free Product GPS/ ISM/ 5GHz Band RF Application P/N: RFTIP2012090T88Q1C *Contents in this sheet are subject to change without prior notice.
Page 2 of 8 ASC_RFTIP2012090T88Q1C_V01 Dec. 2015
FEATURES
- Miniature footprint: 2.0 X 1.2X 0.9 mm3 2. Low Insertion Loss 3. LTCC process
APPLICATIONS
- GPS band 1.575GHz/ISM band 2.4GHz/ 5GHz working frequency 2. Wireless LAN CONSTRUCTION Top view DIMENSIONS Figure Symbol Dimension (mm) L 2.00 ± 0.15 W 1.25 ± 0.15 T 0.90 ± 0.10 A 0.20 ± 0.15 B 0.30 ± 0.15 C 0.35 ± 0.15 D 0.65 ± 0.15 E 0.20 ± 0.15 F 0.20 ± 0.15 G 0.30 ± 0.15 PIN Connection PIN Connection
1 GND 5 GND
2 ANT Port 6 High Band
3 GND 7 GND
4 Low Band 8 Middle Band
Page 3 of 8 ASC_RFTIP2012090T88Q1C_V01 Dec. 2015
ELECTRICAL CHARACTERISTICS
Frequency range 1560~1606 MHz 2400~2500 MHz 4900-5950 MHz Attenuation 15 dB min. @ 2400~2500 MHz 15 dB min. @ 4800~6000 MHz 10 dB min. @ 860~960 MHz 15 dB min. @ 1545~1605 MHz 10 dB min. @ 3600~3750 MHz 20 dB min. @ 4800~5000 MHz 10 dB min. @ 7200~7500 MHz 10 dB min. @ 9600~10000 MHz 25 dB min. @ 860~960 MHz 25 dB min. @ 1545~1605 MHz 25 dB min. @ 1710~1990 MHz 30 dB min. @ 2170 MHz 10 dB min. @ 8100~8800 MHz 15 dB min. @ 8820~9800 MHz 25 dB min. @ 9800~11900 MHz Isolation - - 20 dB min. @ 1559~1606 MHz 25 dB min. @ 4800~5000 MHz 25 dB min. @ 1559~1606 MHz VSWR 2.0 max. Impedance 50 Ω Operation Temperature Range -40C ~ +85C Moisture sensitivity levels : MSL is “LEVEL 1”. (Refer to : IPC/JEDEC J-STD-020) Electro Static Discharge(ESD) : Max. 1KV on all pins TYPICAL ELECTRICAL PERFORMANCE S-Parameter Low band Middle band High band
Page 4 of 8 ASC_RFTIP2012090T88Q1C_V01 Dec. 2015 SOLDER LAND PATTERN Figure Unit : mm Line width to be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.
Page 5 of 8 ASC_RFTIP2012090T88Q1C_V01 Dec. 2015 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235 5C *Immersion time：2 0.5 sec Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260 5C *Leaching immersion time：30 0.5 sec Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150℃, 1 minute. *Solder temperature：2705C *Immersion time：101 sec Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 Customer’s specification. *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units；2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： *Test time：10±1 sec No remarkable damage or removal of the termination. Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 51 sec. Measurement to be made after keeping at room temperature for 242 hours No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C.
Page 6 of 8 ASC_RFTIP2012090T88Q1C_V01 Dec. 2015 Temperature cycle JIS C 0025 1. 303 minutes at -40C3C, 2. 10~15 minutes at room temperature, 3. 303 minutes at +85C3C, 4. 10~15 minutes at room temperature, Total 100 continuous cycles Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. High temperature JIS C 0021 *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Humidity (steady conditions) JIS C 0022 *Humidity：90% to 95% R.H. *Temperature：402C *Time：1000+24/-0 hrs. Measurement to be made after keeping at room temperature for 242 hrs ※ 500hrs measuring the first data then 1000hrs data No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Low temperature JIS C 0020 *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C.
Page 7 of 8 ASC_RFTIP2012090T88Q1C_V01 Dec. 2015 SOLDERING CONDITION Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2, Fig 2. Infrared soldering profile ORDERING CODE RF TIP 201209 0 T 88Q1C Walsin RF device Product Code TIP : TRIPLEXER Dimension code Per 2 digits of Length, Width, Thickness : e.g. : 201209 = Length 20, Width 12, Thickness 09 Unit of dimension 0 : 0.1 mm 1 : 1.0 mm Application T: GPS/ ISM 2.4GHz/5 GHz Specification Design code Minimum Ordering Quantity: 2000 pcs per reel. PACKAGING Plastic Tape specifications (unit :mm) Index Ao Bo ΦD T W Index E F Po P1 P2
Page 8 of 8 ASC_RFTIP2012090T88Q1C_V01 Dec. 2015 Reel dimensions A B C Taping Quantity:2000 pieces per 7” reel CAUTION OF HANDLING Limitation of Applications Please contact us before using our products for the applications lis ted below which require especially high reliability for the prevention of defects, which might directly cause damage to the third party’s life, body or property. (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Medical equipment (5) Disaster prevention / crime prevention equipment (6) Traffic signal equipment (7) Transportation equipment (vehicles, trains, ships, etc.) (8) Applications of similar complexity and /or reliability requirements to the applications listed in the above. Storage condition (1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be confirmed. (2) Storage environment condition. Products should be storage in the warehouse on the following conditions. Temperature : -10 to +40℃ Humidity : 30 to 70% relative humidity Don’t keep products in corrosive gases such as sulfur. Ch lorine gas or acid or it may cause oxidization of electrode, resulting in poor solderability. Products should be storage on the palette for the prevention of the influence from humidity, dust and so n on. Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on. Products should be storage under the airtight packaged condition. Index A B C Dimension (mm) Φ178.0 Φ60.0 Φ13.0