RFTIP2012090T18Q1C WALSIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Page 1 of 9 ASC_ RFTIP2012090T18Q1C_V04 Jul.2018 MULTILAYER CERAMIC TRIPLEXER RFTIP Series – 2012(0805)- RoHS Compliance Halogens Free Product 1560~1606 / 2400~2500 / 4900~5950 MHz Working Frequency P/N: RFTIP2012090T18Q1C *Contents in this sheet are subject to change without prior notice.
Page 2 of 9 ASC_ RFTIP2012090T18Q1C_V04 Jul.2018
FEATURES
- Miniature footprint: 2.0 X 1.2X 0.9 mm3 2. Low Insertion Loss 3. LTCC process
APPLICATIONS
- 1560~1606 / 2400~2500 / 4900~5950 MHz working frequency CONSTRUCTION Top view DIMENSIONS Figure Symbol Dimension (mm) L 2.00 ± 0.15 W 1.25 ± 0.15 T 0.90 max. A 0.20 ± 0.15 B 0.30 ± 0.15 C 0.35 ± 0.15 D 0.65 ± 0.15 E 0.20 ± 0.15 F 0.20 ± 0.15 G 0.30 ± 0.15 PIN Connection PIN Connection
1 GND 5 GND
2 ANT Port 6 High (5GHz) Port
3 GND 7 GND
4 Middle (2.4GHz) Port 8 Low (1.5GHz) Port P5 P6 P7 P3 P2 P1 P8 P4 Top view Bottom view Side view Side view
Page 3 of 9 ASC_ RFTIP2012090T18Q1C_V04 Jul.2018
ELECTRICAL CHARACTERISTICS
RFTIP2012090T18O1C Specification Frequency range 1560~1606 MHz 2400~2500 MHz 4900~5950 MHz Insertion Loss 0.60 dB max. (0.58dB typ.) at 25 ℃ 0.75 dB max. at -40C ~ +85C 0.7 dB max. (0.61dB typ.) at 25 ℃ 0.85 dB max. at -40C ~ +85C 0.80 dB max. (0.75dB typ.) at 25 ℃ 0.95 dB max. at -40C ~ +85C Attenuation 15 dB min. (27.7dB typ.) @2400~2500MHz 15 dB min. (27.9dB typ.) @4800~6000MHz 10 dB min. (19.7dB typ.) @860~960MHz 15 dB min. (19.5dB typ.) @1545~1610MHz 10 dB min. (12.2dB typ.) @3600~3750MHz 20 dB min. (22.4dB typ.) @4800~6000MHz 10 dB min. (16.5dB typ.) @7200~7500MHz 10 dB min. (18.2dB typ.) @9600~10000MHz 25 dB min. (56.8dB typ.) @860~960MHz 25 dB min. (46.1dB typ.) @1545~1605MHz 25 dB min. (34.7dB typ.) @1710~1990MHz 30 dB min. (38.4dB typ.) @2170MHz 10 dB min. (11.9dB typ.) @8100~8800MHz 15 dB min. (16.9dB typ.) @8820~9800MHz 25 dB min. (25.7dB typ.) @9800~11900MHz Isolation 20 dB min. (20.5dB typ.) @1559~1606 MHz 25 dB min. (25.5dB typ.) @4800~5000 MHz 25 dB min. (45.48dB typ.) @1559~1606 MHz VSWR 2.0 max. Impedance 50 Ω Moisture sensitivity levels LEVEL 1 (Refer to : IPC/JEDEC J-STD-020) Operating & Storage Condition (Component) Operation Temperature Range: -40 ~ +85 ℃ Storage Temperature Range: -40 ~ +85 ℃ Storage Condition before Soldering (Included packaging material) Storage Temperature Range:+5~ +40 ℃ Humidity: 30 to 70% relative humidity
Page 4 of 9 ASC_ RFTIP2012090T18Q1C_V04 Jul.2018 TYPICAL ELECTRICAL PERFORMANCE S-Parameters： Low Band Middle Band High Band
Page 5 of 9 ASC_ RFTIP2012090T18Q1C_V04 Jul.2018 LAND PATTERN Figure Unit : mm Line width to be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.
Page 6 of 9 ASC_ RFTIP2012090T18Q1C_V04 Jul.2018 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235 5C *Immersion time：2 0.5 sec Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260 5C *Leaching immersion time：30 0.5 sec Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150C, 1 minute. *Solder temperature：2705C *Immersion time：101 sec Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 Customer’s specification. *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units；2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： *Test time：10±1 sec No remarkable damage or removal of the termination. Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 51 sec. Measurement to be made after keeping at room temperature for 242 hours No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C.
Page 7 of 9 ASC_ RFTIP2012090T18Q1C_V04 Jul.2018 Temperature cycle JIS C 0025 1. 303 minutes at -40C3C, 2. 10~15 minutes at room temperature, 3. 303 minutes at +85C3C, 4. 10~15 minutes at room temperature, Total 100 continuous cycles Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. High temperature JIS C 0021 *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Humidity (steady conditions) JIS C 0022 *Humidity：90% to 95% R.H. *Temperature：402C *Time：1000+24/-0 hrs. Measurement to be made after keeping at room temperature for 242 hrs ※ 500hrs measuring the first data then 1000hrs data No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Low temperature JIS C 0020 *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C.
Page 8 of 9 ASC_ RFTIP2012090T18Q1C_V04 Jul.2018 SOLDERING CONDITION Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2, Fig 2. Infrared soldering profile ORDERING CODE RF TIP 201209 0 T 18O1C Walsin RF device Product Code TIP : TRIPLEXER Dimension code Per 2 digits of Length, Width, Thickness : e.g. : 201210 = Length 20, Width 12, Thickness 09 Unit of dimension 0 : 0.1 mm 1 : 1.0 mm Application T: 1560~1606 MHz / 2400~2500 MHz / 4900~5950 MHz Specification Design code Minimum Ordering Quantity: 2000 pcs per reel. PACKAGING Plastic Tape specifications (unit: mm) Index Ao Bo ΦD T W Index E F Po P1 P2
Page 9 of 9 ASC_ RFTIP2012090T18Q1C_V04 Jul.2018 Reel dimensions A B C Taping Quantity: 2000 pieces per 7” reel CAUTION OF HANDLING Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects, which might directly cause damage to the third party’s life, body or property. (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Medical equipment (5) Disaster prevention / crime prevention equipment (6) Traffic signal equipment (7) Transportation equipment (vehicles, trains, ships, etc.) (8) Applications of similar complexity and /or reliability requirements to the applications listed in the above. Storage condition (1) Products should be used in 6 months from the day of WALSIN outgoing inspection . (2) Storage environment condition. Products should be storage in the warehouse on the following conditions. Temperature : +5 to +40℃ Humidity : 30 to 70% relative humidity Don’t keep products in corrosive gases such as sulfur. Ch lorine gas or acid or it may cause oxidization of electrode, resulting in poor solderability. Products should be storage on the palette for the prevention of the influence from humidity, dust and son on . Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on. Products should be storage under the airtight packaged condition. Index A B C Dimension (mm) Φ178.0 Φ60.0 Φ13.0