RFS NICHICON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CAT.8100H RFS/RFA Test condition Capacitance change tan δ ESR( 1) Leakage current ( 2) 105°C, rated voltage 2000Hrs. Within ±20% of initial value before test 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value –55 to 105°C 2.5 to 25V 10 to 330µF ±20% at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Specifications Performance CharacteristicsItem $BUFHPSZ5FNQFSBUVSF3BOHF 3BUFE7PMUBHF3BOHF 3BUFE$BQBDJUBODF3BOHF $BQBDJUBODF5PMFSBODF Endurance Tangent of loss angle (tan δ) ESR ( 1) Leakage Current ( 2) 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. (mm) φD×L 4×5.2 5×5.7 W 4.3 5.3 H 4.3 5.3 C 5.1 5.9 R 0.5 to 0.9 0.5 to 0.9 P 1.0 1.4 Dimensions Type numbering system (Example : 2.5V 180µF) Nichicon part number R F 2 3 E M C N 1 1 G S Configuration Taping code Control code Capacitance tolerance (±20%) Rated capacitance (180µF) Rated voltage (2.5V) Series name Type S Lot No. Product Logo Voltage Capacitance FPCAP part number '1 3 .& . '4 3 Configuration Taping code Control code Capacitance tolerance (±20%) Capacitance (180µF) Voltage(2.5V) Series name Type ."9 8ʶ П%ʶ Dimension table in next page. High Capacitance (φ4, φ5) Low ESR, High Capacitance, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2011/65/EU). RFARFS Lower ESR Frequency coefficient of rated ripple current Coefficient Frequency 120 Hz 1 kHz 10 kHz 100 kHz 300 kHz
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CAT.8100H 2670 3300 2610 2610 2000 2500 2500 3390 700 2000 1210 2070 2070 2200 2450 5×5.7 5×5.7 5×5.7 5×5.7 5×5.7 5×5.7 5×5.7 5×5.7 4×5.2 5×5.7 5×5.7 5×5.7 5×5.7 5×5.7 5×5.7 220 300 500 300 300 300 300 300 567 100 300 100 105 125 300 135 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 RFS0E181MCN1GS RFA0E331MCN1GS RFS0G101MCN1GS RFS0G151MCN1GS RFS0J470MCN1GS RFS0J101MCN1GS RFS0J121MCN1GS RFA0J181MCN1GS RFS1A100MCN1GB RFS1A680MCN1GS RFS1C220MCN1GS RFS1C330MCN1GS RFS1C390MCN1GS RFS1E220MCN1GS RFS1E270MCN1GS FP-2R5ME181M-FSR FP-2R5ME331M-FAR FP-4R0ME101M-FSR FP-4R0ME151M-FSR FP-6R3ME470M-FSR FP-6R3ME101M-FSR FP-6R3ME121M-FSR FP-6R3ME181M-FAR FP-010ME100M-FSR FP-010ME680M-FSR FP-016ME220M-FSR FP-016ME330M-FSR FP-016ME390M-FSR FP-025ME220M-FSR FP-025ME270M-FSR 180 330 100 150 100 120 180 2.5 (0E) 2.8 4.6 7.2 11.5 18.4 28.7 4.0 (0G) 6.3 (0J) (1A) (1C) (1E) 4.0V 150µF (RFS)4.0V 150µF (RFS) Dimensions NICHICON FPCAP Leakage Current NJO tan δ ESR (mΩ) (20°C/ 100kHz) Rated Ripple Current (mArms) (105°C/ 100kHz) Case Size φD×L (mm) Rated Voltage (V) (code) Rated Capacitance (F) Surge Voltage (V) Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) Impedance Frequency (kHz) Frequency (kHz) RFS / RFA Taping specifications are given in page 28. Recommended land size, soldering by reflow are given in page 25. Please refer to page 3 for the minimum order quantity.