RFP-M1M3-3A MEANWELL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Wireless dimming remote controller RFP-M 1 M 3-3A SPECIFICATION Receiver : Model : M3-3A Power Input : 12~24VDC Max Current Load : 3Ax3CH Max Output Power : 108W(12V)/216W(24V) Gray level : Max4096x4096x4096 Working Temp. : -30℃~55℃ Dimensions : L135xW30xH20(mm) Weight(N.W.) : 47g Remote: Model : M1 Power Input: DC3V(battery CR2032) Working Frequency : 433.92MHz Remote Distance : 40~50m Working Temp.: -30℃~55℃ Dimensions : L104xW58xH9(mm) Weight(N.W.): 42g Working Humidity:20~90% RH non-condensing Working Humidity:20~90% RH non-condensing Total Weight(G.W.):0.14Kg(Blister) Packing:0.14Kg;50pcs/7.53Kg/L44xW32xH21cm File Name:RFP-M1M3-3A 2015-11-23
■ Mechanical Specification 135MM 128MM 30MM 60MM 140MM 9MM 20MM 63MM 78.3MM 108MM 14MM RF Receiver RF Remoter Remote Holder φ3.4mm φ7.2mm φ4mm The Learning ID Method of Remote Control:■ Remote control has been matched to the receiver before leave factory, if deleted accidentally, you can learn ID as follow. Learning ID: Short press ID learning button on the receiver, the running light is on, then press any key on the remote control, the running light flashes several times, activated. Cancel ID: Long press ID learning button on the receiver for 5 seconds. One receiver can be matched with max 10 remote. Operating Instruction for Remote Control■ Sleep Mode: when the remote unattended operation over 30s, it can automatically enter standby mode to extend battery life. press any of these four keys to continue. Scene-mode I (Press 2S and save) Touch Color Circle Delay Off Scene-mode II (Press 2S and save) ON/OFF Dimming Operating Instruction for Receiver :■ Power input socket Remote ID learning button Indicator light LED lamp connection socket Function Dimming Remote W W W V+ NW WW / V+ NW WW CW V+ R G B V+ Output Output instruction for compatible remote Color Temp. RGB control File Name:RFP-M1M3-3A 2015-11-23 Wireless dimming remote controller
■ Connection Power Adapter M3-3A M3-3A Single LED Strip Figure A Power Adapter Single LED Strip Single LED Strip Single LED Strip Figure B Caution■ 1. The product shall be installed and serviced by a qualified person. 7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself. 6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights. 5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector. 4. Please check if the output voltage of any LED power supplies used comply with the working voltage of the product. 3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation. 2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it is mounted in a water proof enclosure. File Name:RFP-M1M3-3A 2015-11-23 Wireless dimming remote controller