RFP-100-50TW ANAREN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- DC - 6.0 GHz
- 100 Watts
- BeO Ceramic
- Welded Silver Leads
- Non-Nichrome Resistive Element
- Low VSWR
- 100% Tested Ω 4.5.45 Sales Desk USA: Voice:(800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice:(+44) 23 92 232392 Fax: (+44) 23 92 251369
4.5.46 Sales Desk USA: Voice:(800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice:(+44) 23 92 232392 Fax: (+44) 23 92 251369 Power Derating Suggested Mounting Procedures MIN..025 (2 PLACES) SUGGESTED STRESS RELIEF METHODS BOARD LOWER THAN LEAD. WITH LEAD. BOARD EVEN SCALE: 1. Make sure that the devices are mounted on flat surfaces (.001” under the device) to optimize the heat transfer. 2. Drill & tap the heatsink for the appropriate thread size to be used. 3. Coat heatsink with a minimum amount of high quality silicone grease (.001” max. thickness). 4. Position device on mounting surface and secure using sock- et head screws, flat & split washers. Torque screws to the appropriate value. Make sure that the device is flat against the heatsink. (Care should be taken to avoid upward pres- sure of the leads towards the lid). 5. Solder leads in place using an SN63 type solder with a controlled temperature iron (210°C). SCALE: BOARD HIGHER THAN LEAD.THAN LEAD. BOARD LOWER NOT RECOMMENDED APPLICATION % OF RATED POWER 150125100755025 100 CASE TEMPERATURE — °C