BNC SAMTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

RFC6T* = 12G-SDI, Belden 4694R Cable RFA6T = RG 6 Cable RFB6T = Belden 1694A Cable RF179 = RG 179 Cable –74SP3 = 75 Ω BNC Straight Plug –D4SP3 = 75 Ω BNC Die Cast Straight Plug (RFA6T, RFB6T, RF179 only) –74BJ3 = 75 Ω BNC Bulkhead Jack (RF179 only) –74RP3 = 75 Ω BNC Right-angle Plug (RFA6T, RFB6T, RFC6T only) –“XXXX” = Overall Length in millimeters –0300 (300 mm) 11.81" minimum (RFA6T, RFB6T, RFC6T) –0100 (100 mm) 3.94" minimum (RF179) ALSO AVAILABLE 75 Ω: DIN 1.0/2.3, HD-BNC™ = RFA6T, RFB6T, RFC6T 75 Ω: DIN 1.0/2.3, SMB, MCX, MMCX = RF179 75 Ω BNC TO 12 GHz BNC Cable Assemblies RFC6T, RFA6T, RFB6T, RF179 BNC Cable Connectors BNC7T-CA CONNECTORS FOR INDUSTRY STANDARD CABLES BNC7T-P-C-GN-ST-CA3 Machined, RG 179 Cable BNC7T-P-C-GN-RA-CA3 Machined, RG 179 Cable BNC7T-P-C-GN-ST-CA6 *Machined, RG 6 Cable BNC7T-P-C-GN-RA-CA6 *Machined, RG 6 Cable BNC7T-P-C-GN-ST-CA6B Belden 4694R Cable BNC7T-P-C-GN-RA-CA6B Belden 4694R Cable BNC7T-J-C-GN-ST-BH3 Machined, Bulkhead, RG 179 Cable BNC7T- P-C-GN-ST-CA3D Die Cast, RG 179 Cable BNC7T-P-C-GN-ST-CA6D Die Cast, RG 179 Cable P-C = Cable Plug J-C = Cable Jack G N = Plating (10 µ" Gold on contact, Nickel on outer contact and shell) ST = Straight RA = Right-angle (21.70) .854 (14.50) .571 C (9.65) .380 (17.50) .689 Hex. (29.80) 1.173 –CA3D –CA6D (21.62) .851 (14.48) .570 (2.70) .106 DIA (6.85) .270 DIA Note: Additional plating options available on Cable Assemblies, Cable Connectors and Board Connectors. Contact RFGroup@samtec.com *Designed to meet SMPTE 2082 12G-SDI specifications. *Designed to meet SMPTE 2082 12G-SDI specifications. TERMINATION C (DIA) –CA3 (2.70) .106 –CA6 (6.85) .207 MACHINEDDIE CAST Supplied with pins, washers, nuts, gaskets and ferrules. See website for dimensions. Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice. F-221 (Rev 22FEB22) samtec.com/BNC

75 Ω DIE CAST BNC TO 12 GHz 75 Ω MACHINED BNC TO 12 GHz BNC7T - GENDER - TYPE - PLATING - ORIENTATION - TERMINATION = Jack = PCB Mount –GN = 10 µ" (0.25 µm) Gold contact, 100 µ" (2.54 µm) Nickel Shell –ST = Straight –RA = Right-angle Bulkhead/Panel Mount –TH2D = Tall Through-hole Die Cast (–ST only) –BH2D* = Low-Profile Die Cast Bulkhead Through-hole (–RA only) –BM1D* = Low-Profile Die Cast Bulkhead Mixed Technology for (1.60 mm) .062" PCB (-RA only) –BM2D* = Low-Profile Die Cast Bulkhead Mixed Technology for (3.18 mm) .125” PCB (-RA only) –EM1D* = Edge Mount Die Cast Bulkhead/Panel Mount for (1.60 mm) .062" PCB (–ST only) –EM2D* = Edge Mount Die Cast Bulkhead/Panel Mount for (2.40 mm) .093" PCB (–ST only) BNC7T - GENDER - TYPE - PLATING - ORIENTATION - TERMINATION = Jack = PCB Mount –GN = 10 µ" (0.25 µm) Gold contact, 100 µ" (2.54 µm) Nickel Shell –ST = Straight –RA = Right-angle Bulkhead/Panel Mount –TH1 = Standard Through-hole (–ST only) –BH1* = Standard Bulkhead Through-hole (–RA only) –EM1* = Edge Mount Bulkhead/Panel Mount for (1.60 mm) .062" PCB (–ST only) –EM2* = Edge Mount Bulkhead/Panel Mount for (2.40 mm) .093" PCB (–ST only) Cable Mates: RF179, RFA6T, RFB6T, RFC6T, GRF7H-C Cable Mates: RF179, RFA6T, RFB6T, RFC6T, GRF7H-C BNC Board Connectors BNC7T-TH, BNC7T-BH, BNC7T-BM, BNC7T-EM BNC Board Connectors BNC7T-TH, BNC7T-BH, BNC7T-EM –ST–TH2D (9.65) .380 DIA (9.65) .380 DIA (29.00) 1.142 (10.80) .425 (10.15) .400 (13.90) .547 (34.29) 1.350 (13.41) .528 (23.50) .925 (9.65) .380 DIA (15.40) .606 (9.65) .380 DIA (25.48) 1.003 –RA–BM1D (BALANCED FOR PICK-AND-PLACE) –RA–BH2D (18.00) .709 (9.65) .380 DIA (9.65) .380 DIA (12.70) .500 .430 (21.00) .827 (32.75) 1.289 –ST–TH1 –RA–BH1 Notes: Contact RFGroup@samtec.com for 12G-SDI PCB mount launch characteristics. Designed to meet SMPTE 2082 12G-SDI specifications. Additional plating options available on Board Connectors. Contact RFGroup@samtec.com Notes: Contact RFGroup@samtec.com for 12G-SDI PCB mount launch characteristics. Designed to meet SMPTE 2082 12G-SDI specifications. Additional plating options available on Board Connectors. Contact RFGroup@samtec.com *Lock washers & knurled nuts supplied with bulkhead/panel mount options *Lock washers & knurled nuts supplied with bulkhead/panel mount options Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice. F-221 (Rev 22FEB22)samtec.com/BNC