RFB0807-2R2L COILCRAFT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Document 277-1 Document 277-1 Revised 10/22/09 Power Inductors – RFB Series RFB0807 RFB0810 RFB1010 0.197 ±0.02 5,0 ±0,5 XXX MARKING 0.37 9,5 dia max max0.45 11,5 dia0.024 0,6 0.157 ±0.02 4,0 ±0,5 0.236 ±0.02 6,0 ±0,5 XXX MARKING 0.43 11,0 dia max max dia 0.45 11,5 0.031 0,8 0.157 ±0.02 4,0 ±0,5 Core material Ferrite Terminations Tin-silver over tin over copper over steel. Other terminations available at additional cost. Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +85°C. Packaging: –40°C to +80°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 150 parts per tray; optional fanfold tape PCB washing Only pure water or alcohol recommended  Low cost, high current power inductors  2.2 µH to 18 mH inductance range  500 V isolation from winding to core.  RFB0810 and RFB1010 have a flame retardant polyolefin wrap to protect the winding.

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Document 277-2 Document 277-2 Revised 10/22/09 1. When ordering, please specify termination code: RFB0807-183L Termination: L = Tin-silver over tin over copper over steel. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). To order parts packaged in fanfold tape (800 parts per box), add the letter “F” at the end of the part number. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent. 3. SRF measured using Agilent/HP 4191A or equilvalent. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes a 40°C temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Power Inductors – RFB0807 Series Part DCR max SRF typ3 IIIIIsat4 Irms (A)5 number1 Inductance2 (Ohms) (MHz) (A) 20°C rise 40°C rise RFB0807-100L 10 µH ±10% 0.040 30 3.10 3.00 4.20 RFB0807-120L 12 µH ±10% 0.050 30 2.80 2.50 3.56 RFB0807-150L 15 µH ±10% 0.065 25 2.50 2.25 3.20 RFB0807-180L 18 µH ±10% 0.078 20 2.30 2.07 2.94 RFB0807-220L 22 µH ±10% 0.100 20 2.10 1.90 2.70 RFB0807-270L 27 µH ±10% 0.110 17 1.90 1.70 2.42 RFB0807-330L 33 µH ±10% 0.120 15 1.70 1.50 2.13 RFB0807-390L 39 µH ±10% 0.160 13 1.60 1.45 2.06 RFB0807-470L 47 µH ±10% 0.190 12 1.45 1.30 1.85 RFB0807-560L 56 µH ±10% 0.210 11 1.30 1.20 1.71 RFB0807-680L 68 µH ±10% 0.280 10 1.20 1.10 1.56 RFB0807-820L 82 µH ±10% 0.330 9 1.10 1.00 1.42 RFB0807-101L 100 µH ±10% 0.400 8 1.00 0.90 1.30 RFB0807-121L 120 µH ±10% 0.450 7 0.90 0.80 1.14 RFB0807-151L 150 µH ±10% 0.510 6 0.80 0.72 1.02 RFB0807-181L 180 µH ±10% 0.700 5 0.70 0.63 0.90 RFB0807-221L 220 µH ±10% 0.800 5 0.65 0.60 0.85 RFB0807-103L 10 mH ±10% 34 0.7 0.10 0.10 0.13 RFB0807-123L 12 mH ±10% 46 0.6 0.08 0.10 0.13 RFB0807-153L 15 mH ±10% 53 0.5 0.06 0.08 0.11 RFB0807-183L 18 mH ±10% 56 0.5 0.05 0.08 0.10

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Document 277-3 Document 277-3 Revised 10/22/09 Power Inductors – RFB0807 Series Typical L vs Frequency Typical L vs Current

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Document 277-4 Document 277-4 Revised 10/22/09 Power Inductors – RFB0810 Series Part Inductance1 DCR max SRF typ2 Isat3 Irms (A)4 number ±10% (Ohms) (MHz) (A) 20°C rise 40°C rise RFB0810-100L 10 µH 0.030 22 4.20 4.00 5.30 RFB0810-120L 12 µH 0.035 20 3.90 3.75 5.10 RFB0810-150L 15 µH 0.040 17 3.60 3.52 4.80 RFB0810-180L 18 µH 0.040 15 3.30 3.30 4.50 RFB0810-220L 22 µH 0.050 12 2.90 3.20 4.20 RFB0810-270L 27 µH 0.055 12 2.60 2.87 3.90 RFB0810-330L 33 µH 0.075 11 2.40 2.65 3.60 RFB0810-103L 10 mH 21 0.6 0.13 0.12 0.17 RFB0810-123L 12 mH 28 0.5 0.12 0.11 0.15 RFB0810-153L 15 mH 32 0.5 0.11 0.10 0.14 RFB0810-183L 18 mH 36 0.4 0.10 0.09 0.12 1. When ordering, please specify termination code: RFB0810-183L Termination: L = Tin-silver over tin over copper over steel. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). To order parts packaged in fanfold tape (800 parts per box), add the letter “F” at the end of the part number. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent. 3. SRF measured using Agilent/HP 4191A or equilvalent. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes a 40°C temperature rise from 25°C ambient. 6. Electrical specifications at 25°C.

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Document 277-5 Document 277-5 Revised 10/22/09 Power Inductors – RFB0810 Series Typical L vs Frequency Typical L vs Current

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Document 277-6 Document 277-6 Revised 10/22/09 Power Inductors – RFB1010 Series Part Inductance1 DCR max SRF typ2 Isat3 Irms (A)4 number ±10% (Ohms) (MHz) (A) 20°C rise 40°C rise RFB1010-100L 10 µH 0.023 23 6.10 4.20 6.00 RFB1010-120L 12 µH 0.025 20 5.60 4.00 5.70 RFB1010-150L 15 µH 0.028 19 5.00 3.75 5.40 RFB1010-180L 18 µH 0.030 16 4.60 3.50 5.00 RFB1010-220L 22 µH 0.042 15 4.10 3.30 4.70 RFB1010-270L 27 µH 0.046 12 3.70 3.00 4.40 RFB1010-330L 33 µH 0.055 11 3.40 2.80 4.10 RFB1010-103L 10 mH 19 0.6 0.19 0.13 0.18 RFB1010-123L 12 mH 22 0.5 0.17 0.12 0.17 RFB1010-153L 15 mH 29 0.5 0.16 0.11 0.15 RFB1010-183L 18 mH 33 0.4 0.14 0.10 0.13 1. When ordering, please specify termination code: RFB1010-183L Termination: L = Tin-silver over tin over copper over steel. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). To order parts packaged in fanfold tape, add the letter “F” at the end of the part number. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent. 3. SRF measured using Agilent/HP 4191A or equilvalent. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes a 40°C temperature rise from 25°C ambient. 6. Electrical specifications at 25°C.

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Document 277-7 Document 277-7 Revised 10/22/09 Power Inductors – RFB1010 Series Typical L vs Frequency Typical L vs Current