RFASWHH1416PTF06 WALSIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Page 1 of 8 ASC_RFASWHH1416PTF06_V01 Jul. 2018 RF Switch Series – RoHS Compliance SP6T GPIO Switch Halogens Free Product Any 2G/3G/4G Band for TRx System P/N: RFASWHH1416PTF06 *Contents in this sheet are subject to change without prior notice.
Page 2 of 8 ASC_RFASWHH1416PTF06_V01 Jul. 2018
FEATURES
Low Insertion Loss：0.55dB typ. @ 2.7GHz High Isolation：30dB typ. @ 2.7GHz Low control voltage：1.2 to 2.7 V Miniature footprint：2.0 x 2.0 x 0.55 mm3 (QFN 14-pin) Moisture Sensitive Level 3 (MSL3)： High ESD tolerance of 1kV HBM at all pins：
Description
The RFASWHH1416PTF06 is a SOI (Silicon On Insulator) multi-ports switch operating at 0.1-2.7 GHz in a QFN-14 (2.0 x 2.0 x 0.55 mm3) package. The RFASWHH1416PTF06 features very high isolation with very low DC power consumption. The RFASWHH1416PTF06 has ESD protection devices to achieve excellent ESD performances. Application Multi-mode 2G/3G/4G, LTE application transmit/receive system. Block Diagram and Pin Out (Top View) Pin Names and Descriptions Pin Name Description Pin Name Description
1 RF5 RF path 5 8 NC Not connected
2 RF3 RF path 3 9 RF2 RF path 2
3 RF1 RF path 1 10 RF4 RF path 4
4 VDD DC power supply 11 RF6 RF path 6
5 VC3 DC control voltage 3 12 NC Not connected
6 VC2 DC control voltage 2 13 ANT Antenna port
7 VC1 DC control voltage 1 14 NC Not connected
Page 3 of 8 ASC_RFASWHH1416PTF06_V01 Jul. 2018 Application Circuit VDD VC1 5 6 7 14 13 12 RF2 RF4 VC2 VC3 C3 C2 C1 RF6 Parts List Parts No. Value C1-C4 1000 pF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units RFx Input Power Pin - +33 dBm DC Supply Voltage VDD +2.5 +5.0 V DC Control Voltage VC1~3 -0.5 +3.0 V Operating temperature TOP -40 +85 °C Storage temperature TST -55 +150 °C HBM ESD Voltage, All Pins VESD1 - +1000 V Note 1：Human Body Model ESD Voltage, Class 1C Exceeding absolute maximum ratings may cause permanent damage. Operation between operating range maximum and absolute maximum for extended periods may reduce reliability.
Page 4 of 8 ASC_RFASWHH1416PTF06_V01 Jul. 2018 Parameter Symbol Test Condition Min. Typ. Max. Units RF Specifications Operating frequency f 0.1 2.7 GHz Insertion Loss (ANT port to RFx port) IL 0.1 ~ 1.0GHz 1.0 ~ 2.0GHz 2.0 ~ 2.7GHz 0.40 0.50 0.55 0.50 0.60 0.65 dB dB dB dB Isolation (ANT port to RFx port) Iso 0.1 ~ 1.0GHz 1.0 ~ 2.0GHz 2.0 ~ 2.7GHz dB dB dB On state match VSWR 0.1 ~ 2.7GHz - 1.22 1.67 - RFx Harmonics 2f0 PIN = +28dBm, f = 900MHz - 75 - dBc 3f0 PIN = +28dBm, f = 900MHz - 75 - dBc 3rd Order Input Intercept Point IIP3 PIN = +28dBm, f = 2.0GHz, Δf = 1MHz - 60 - dBm DC Specification (Decoder) Supply Voltage VDD 2.5 2.85 4.2 V Supply Current IDD VDD=2.85V - 100 120 μA Control Voltage(High) VC1~3(H) VC1= VC2= VC3 1.2 1.8 2.7 V Control Voltage(Low) VC1~3(L) VC1= VC2= VC3 - - 0.4 V Control Current IC1~3 VC1= VC2= VC3=1.8V - 0.5 5.0 μA Switching Specification Switching speed TSW 50% VCTL to 90/10% RF - 1.75 2.20 μs Note：All measurements made in a 50Ω system with 0/+1.8V control voltages, unless otherwise specified. Logic Table for Switch On-Path (High=1.8V ,Low= 0V) VC1 VC2 VC3 RF1 RF2 RF3 RF4 RF5 RF6 0 0 0 On Off Off Off Off Off 0 0 1 Off On Off Off Off Off 0 1 0 Off Off On Off Off Off 0 1 1 Off Off Off On Off Off 1 0 0 Off Off Off Off On Off 1 0 1 Off Off Off Off Off On
Page 5 of 8 ASC_RFASWHH1416PTF06_V01 Jul. 2018 Package Dimensions 2.0±0.1 2.0±0.1 Pin 1 Index Side ViewTop View Bottom View 418R 0.55±0.05 0.4±0.05 0.45±0.05 1±0.1 1±0.1 Unit:mm 0.20±0.05 0.245±0.05 0.20±0.05 0.245±0.05 Land Pattern Package Outline(Red Line) Solder Resist(Green Color) Land Pattern(Yellow Color) Unit : mm 0.20 0.45 0.40 0.20 1.00 1.00 0.245 0.245 0.05
*electrode must be covered by fresh solder. Typical examples of soldering processes that provide reliable joints without any damage are given in Figure 1 1. Figure 11. Infrared soldering profile
Page 7 of 8 ASC_RFASWHH1416PTF06_V01 Jul. 2018 Ordering code RF ASW H H1416P T RF module RF: Walsin RF Switch Device Module type ASW: Antenna Switch Application H: SP6T Design Code Packing T: Taping Minimum Ordering Quantity: 3000 pcs per reel. Packaging w F E Ao PoP2P1 D T Bo 418R 418R 418R 418R 418R Plastic Tape specifications (unit :mm) Index Ao Bo D T W Index E F Po P1 P2 Reel dimensions A B C Taping Quantity : 3000 pieces per 7” reel Index A B C Dimension (mm) Φ178.0 Φ60.0 Φ13.2
Page 8 of 8 ASC_RFASWHH1416PTF06_V01 Jul. 2018 Caution of handling Limitation of Applications Please contact us before using our products for the applications listed below which require especially high relia bility for the prevention of defects, which might directly cause damage to the third party’s life, body or property. (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Medical equipment (5) Disaster prevention / crime prevention equipment (6) Traffic signal equipment (7) Transportation equipment (vehicles, trains, ships, etc.) (8) Applications of similar complexity and /or reliability requirements to the applications listed in the above. Storage condition (1) Products should be used in 6 months from the day of WALSIN o utgoing inspection, which can be confirmed. (2) Storage environment condition. Products should be storage in the warehouse on the following conditions. Temperature : -10 to +40°C Humidity : 30 to 70% relative humidity Don’t keep products in corrosive gases suc h as sulfur. Chlorine gas or acid or it may cause oxidization of electrode, resulting in poor solderability. Products should be storage on the palette for the prevention of the influence from humidity, dust and son on. Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on. Products should be storage under the airtight packaged condition.