RES-9242GC ORING | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

▪ O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 10 milliseconds and up to 250 nodes. The O-Ring redundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology. ▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing's switches compatible with other vendor's proprietary redundant ring technologies. It enables ORing's switches to form a single ring with other vendor's switch. In cases where the ring is setup using proprietary technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements. RES-9242GC *NOTE: This function is available by request only

1-103Designed for Rugged Excellence Industrial Media Converter Industrial Device Server Industrial Wireless Access Point Industrial Cellular VPN Router Industrial M2M Gateway Network Management Software Accessories Industrial Ethernet Switch Industrial Ethernet Switch Rack-Mount Managed Ethernet Switch v1.0a / Jun, 2016 ▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost-effectiveness in one set of network redundancy topology. ▪ MRP*NOTE : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol. ▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS attack immediately and completely. ▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks. ▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or more. Commander Topology View Network connection *NOTE: This function is available by request only

1Industrial Ethernet Switch www.oring-networking.com1-104 Industrial Ethernet Switch Rack-Mount Managed Ethernet Switch v1.0a / Jun, 2016 Dimensions (Unit=mm) ORing Switch Model RES-9242GC Physical Ports 10/100Base-T(X) with RJ45 Auto MDI/MDIX 24 10/100/1000Base-T(X) RJ45 and 100/1000Base-X SFP with combo port 2 Technology Ethernet Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) MAC Table 8k Priority Queues 8 Processing Store-and-Forward Switch Properties Switching latency: 7 us Switching bandwidth: 8.8Gbps Max. Number of Available VLANs: 4095 VLAN ID Range : VID 1 to 4094 IGMP multicast groups: 256 for each VLAN Port rate limiting: User Define Security Features Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) Single 802.1x and Multiple 802.1x MAC-based authentication QoS assignment MAC address limit TACACS+ VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security Web and CLI authentication and authorization Specifications

1-105Designed for Rugged Excellence Industrial Media Converter Industrial Device Server Industrial Wireless Access Point Industrial Cellular VPN Router Industrial M2M Gateway Network Management Software Accessories Industrial Ethernet Switch Industrial Ethernet Switch Rack-Mount Managed Ethernet Switch v1.0a / Jun, 2016 Software Features IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static) Multiple Registration Protocol (MRP) MSTP (RSTP/STP compatible) Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP v2/v3 Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client DHCP Relay Modbus TCP SMTP Client NTP server Network Redundancy O-Ring Open-Ring O-Chain MRP*NOTE MSTP (RSTP/STP compatible) Fast Recovery RS-232 Serial Console Port RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1 LED Indicators Power Indicator Green : Power indicator x 2 Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken. Fault Indicator (Fault) Amber : Indicate unexpected event occurred 10/100Base-T(X) RJ45 Port Indicator Green for Link/Act indicator. Green for speed indicator ~ On for 100Mbps / Off for 10Mbps 10/100/1000Base-T(X) RJ45 Port With Combo Port Indicator Green for Link/Act indicator. Green for speed indicator ~ On for 100/1000Mbps / Off for 10Mbps 100/1000Base-X SFP Port With Combo Port Indicator Green for port Link/Act. Power Power Inputs Dual redundant 100 ~ 240VAC with power cord Power consumption (Typ.) 15.2 watts Overload current protection Present Physical Characteristic Enclosure 19 inches rack mountable Dimension (W x D x H) 440 x 200 x 44 mm (17.32 x 7.87 x 1.73 inch) Weight (g) 2695 g Environmental Storage Temperature -40 to 85 o C (-40 to 185 o Operating Temperature -40 to 75 o C (-40 to 167 o Operating Humidity 5% to 95% Non-condensing Regulatory approvals EMI FCC Part 15, CISPR (EN55022) class B EMS EN61000-4-2 (ESD) EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 (compliant, certification pending) MTBF 385,493 hours Warranty 5 years *NOTE: This function is available by request only

1Industrial Ethernet Switch www.oring-networking.com1-106 Industrial Ethernet Switch Rack-Mount Managed Ethernet Switch v1.0a / Jun, 2016 Available Model Model Name Description RES-9242GC_US Industrial 26-port rack mount managed Ethernet switch with 24x10/100Base-T(X) and 2xgigabit combo, SFP socket, US power cord RES-9242GC_UK Industrial 26-port rack mount managed Ethernet switch with 24x10/100Base-T(X) and 2xgigabit combo, SFP socket, UK power cord RES-9242GC_EU Industrial 26-port rack mount managed Ethernet switch with 24x10/100Base-T(X) and 2xgigabit combo, SFP socket, EU power cord RES-9242GC_JP Industrial 26-port rack mount managed Ethernet switch with 24x10/100Base-T(X) and 2xgigabit combo, SFP socket, JP power cord Packing List ‧RES-9242GC x 1 ‧Rack-mount Kit x 1 ‧ORing Tool CD x 1 ‧Power Cable x 2 ‧Quick Installation Guide x 1 ‧Console Cable x 1 Optional Accessories (Can be purchased separately) ‧Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices ‧DBU-01 : backup unit device ‧SFP100 series : 100Mbps SFP optical transceiver ‧SFP1G series : 1Gbps SFP optical transceiver RES-9 AA B CC

Ordering Information

Code Definition 10/100Base-T(X) Port Number Additional Port Number Additional Port Type Option - 24: 24 ports - 2: 2 ports -GC: Gigabit combo, SFP socket