REL110 ASTRODYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

110 Watt Open Frame Switching Power Supply with PFC R E L 11 0 s e r i e s

300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181WWW.ASTRODYNE.COM

110 Watts Output Power

1, 2, 3, and 4 Outputs Active Power Factor Correction 2.5VDC to 48VDC Outputs Model Number Output #1 Output #2 Output #3 Output #4 SINGLE OUTPUT REL110-1001 2.5V/22A REL110-1002 3.3V/22A REL110-1003 5V/22A REL110-1004 12V/9.2A REL110-1005 15V/7.3A REL110-1006 24V/4.6A REL110-1007 28V/3.9A REL110-1008 48V/2.3A DUAL OUTPUT REL110-2001 3.3V/10A 5V/5.6A REL110-2002 5V/10A 12V/5A REL110-2003 5V/10A 24V/3A REL110-2004 12V/5A -12V4A REL110-2005 15V/4A -15V/3A TRIPLE OUTPUT REL110-3001 5V/10A 12V/3A -12V/3A REL110-3002 5V/10A 15V/2A -15V/2A QUAD OUTPUT REL110-4001 3.3V/10A 5V/6A 12V/2A -12V/2A REL110-4002 5V/10A 3.3V/6A 12V/2A -12V/2A REL110-4003 5V/10A 3.3V/6A 15V/2A -15V/2A REL110-4004 5V/10A -5V/6A 12V/2A -12V/2A REL110-4005 5V/10A -5V/6A 15V/2A -15V/2A REL110-4006 5V/10A 24V/2A 12V/2A -12V/2A REL110-4007 5V/10A 24V/2A 15V/2A -15V/2A Order On-Line! astrodyne.com 5” x 3” x 1.32” Medical Versions Available Contact Factory

300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181WWW.ASTRODYNE.COM INPUT SPECIFICATIONS Input Voltage, Full Range: 85-264 VAC Active PFC >0.95@115VAC Input Frequency 47-63Hz. Inrush Current 30A @ 115VAC, typ 4 40A @ 230VAC, typ 4 Leakage Current <300uA @ 240VAC OUTPUT SPECIFICATIONS Output Power 80W, Conv/110W Forced Air Minimum Load Requirement 10% Max Current (A, Peak) See Model Selection Chart 7 Initial Accuracy +/-1%, typ Voltage Adjust ± 5%, typ Load Regulation ± 1%, typ Cross Regulation +/-5% Line Regulation ± 0.5%, typ Temperature Coefficient ± 0.02%/°C Ripple/Noise 100mV Pk-Pk, typ Overvoltage Protection 110-150%, Type 2 & 3 Remote Sense (Singles Only) 250mV compensation Hold Up/Start Up Times 16mS/4Sec, typ Short Circuit Protection Continuous 4 Current Limit 110-160% typ, Auto Recovery GENERAL SPECIFICATIONS Input-Output Isolation 3000VAC 5 Output-Ground Isolation 500VAC Input-Ground Isolation 1500VAC Efficiency (@ Full Load) 82%, typ (or See Chart/Curve) Safety UL60950/EN60950 Approved EMC EN55022/B, EN61000-3-2,3/A ENVIRONMENTAL SPECIFICATIONS Oper. Temperature 0 to +60 °C 4 Relative Humidity 10-95%, Description 4 Storage Temperature -40 to +85 °C 4 MTBF 100KHrs MIL-Std 217F Shock & Vibration To MIL-Std 810E PHYSICAL SPECIFICATIONS Dimensions 5”x3”x1.32” Material Flammability to UL94V-0 Construction Open Frame Weight 0.8lb SPECIFICATION NOTES 1) All specifications typical @ 25°C, Nominal Line & Load, unless otherwise noted. 2) O/P noise measured directly at pins/terminals with 0.1uFbypass, pk-pk @ 20MHz bandwidth. 3) Ripple and Noise dependant upon output voltage as specified per particular model. 4) These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed or implied. 5) Isolation for up to 1 minute duration. 6) No termination necessary with control pin to maintain constant “ON” operation (if applicable to this model) 7) Max load (peak) specified for 10mS max, 20% duty cycle, minimum load on all outputs A Blue Number means see respective Specification All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181WWW.ASTRODYNE.COM MECHANICAL DIMENSIONS CONNECTOR SPECIFICATIONS P1 AC Input .156 friction lock header mates with Molex 09-50-3031 crimp terminal housing with Molex 2478 crimp terminal P2 DC Output (Single) .156 friction lock header mates with Molex 09-50-3081 crimp terminal housing with Molex 2478 crimp terminal P2 DC Output (Multiple) .156 friction lock header mates with Molex 09-50-3101 crimp terminal housing with Molex 2478 crimp terminal G Ground .187 quick disconnect terminal P3 P.F Sense (Single) .100 breakaway header mates with Molex 50-57-9002 crimp terminal housing with Molex 71851crimp terminal P3 Power Fail (Multiple) .100 breakaway header mates with Molex 50-57-9002 crimp terminal housing with Molex 71851 crimp terminal THERMAL PERFORMANCE 1 – Optimum 2 – Good 3 – Good 4 - Fair RECOMMENDED AIR FLOW DIRECTION 2 4 SINGLE OUTPUT MODEL .128 DIA MOUNTING HOLE (4 PLACES) OPEN FRAME 1 (-) OUTPUT 1 2 (-) OUTPUT 1 3 (-) OUTPUT 1 4 (-) OUTPUT 1 5 (+) OUTPUT 1 6 (+) OUTPUT 1 7 (+) OUTPUT 1 8 (+) OUTPUT 1 V1 ADJUST 1 (+) OUTPUT 1 2 (+) SENSE 3 (-) SENSE 4 (-) OUTPUT 1 5 (-) P.F. RTN 6 (+) P.F. SIG AC INPUT GND L N P1 1 1 ( -) OUTPUT 4 2 (+) OUTPUT 4 3 ( -) OUTPUT 3 4 (+) OUTPUT 3 5 ( -) OUTPUT 2 6 (+) OUTPUT 2 7 ( -) OUTPUT 1 8 ( -) OUTPUT 1 9 (+) OUTPUT 1 10 (+) O UTPUT 1 V1 ADJUST 1 ( -) P.F. RTN 2 ( +) P.F. SIG AC INPUT GND L N 3.00 (76.2) 2.70 (68.6) 5.00 (127.0) MULTIPLE OUTPUT MODEL 1.32(33.5) Max. .75 (19.1) 1.10 (27.9) OPTIONAL CHASSIS/COVER 4-40 MOUNTING HOLES (4 PLACES) 4-40 MOUNTING HOLE (4 PLACES) 4.70 (119.4) .68 (17.2) 1.48 (37.6) 5.26 (133.6) 4.70 (119.4) 3.12 (79.2) 2.70 (68.6) AC INPUT GND L N 2 4 ALL DIMENSIONS IN INCHES (MM) Maximum Output Power vs. Ambient Temperature Ambient Temperature, (C) )sttaW( rewoP tuptuO 110 100 0 10 20 30 40 50 60 70 CONVECTION COOLING CONVECTION COOLING WITH CHASIS / COVER FORCED AIR COOLING CONVECTION COOLING CONVECTION COOLING WITH CHASIS / COVER FORCED AIR COOLING