REYFA FARADAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

© Faraday Tech nology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara366d Page 1 of 3 Sep-05(A)

  • Reflowable • Washable
  • Surface mount compatibility • Small size, low cost
  • Flat or Sinx/x versions • Luminance and Chrominance versions With reduced analogue filter costs resulting from oversampling techniques, there is an increased need for manufact uring facilities to avoid the large production costs associated with the presently available through hole packages. The Faraday RE range of oversampling filters can be used in surface mount assembly lines allowing vacuum pick up and reflow (see Page 2). This range of analogue filters has been designed for use in conjunction with a half band interpolating/decimating filter such as the TRW2242 or with the many encoder chips available which employ digital filtering and an output D to A converter. This type of digital filtering has good attenuation between the frequencies of Fs/4 and 3Fs/4 where Fs is the Master Clock rate. When the normal clock rate of 27 MHz is used for the luminance channel the signal can be expected to have insignificant energy between 6.75 MHz and 20.25 MHz. In order to preserve the integrity of the signal these filters have a good amplitude and group delay characteristics in the passband, similar to the requirements of CCIR601 but due to the above considerations do not have significant attenuation below 21 MHz. Order code: REYFA REYSA RECFA RECSA Impedance 150Ω 150Ω 150Ω 150Ω Sinx/x correction No Yes No Yes End of Passband 5.75 MHz 5.75 MHz 2.75 MHz 2.75 MHz G.D. ripple < 6 ns < 10 ns < 12 ns < 20 ns Start of stopband 21.5 MHz 21.5 MHz 10.75 MHz 10.75 MHz Stopband atten. wrt 100 kHz > 40 dB > 40 dB > 40 dB > 40 dB Delay time nom. at 200 kHz 30 ns 27 ns 58 ns 50 ns Aqueous Washable Yes Yes Yes Yes RE SERIES VIDEO OVERSAMPLING SMD FILTERS

© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to chan ge without notice Fara366d Page 2 of 3 Sep-05(A) The RE Series filters have been successfully tested to the following reflow profile using a five zone IR/Convection oven. Belt speed =10in/min °C P1 P2 P3 P4 RF set 260 200 200 300 320 260 200 200 300 320 Surf Systems Reflow temp bar = 183 n n n above temp bar sec 89 0 0 max temp 224 0 0 ç left bar temp 180 0 0 right bar temp è 183 0 0 avr slope °C/sec 0.0 0.0 0.0 time between bars 95.70 secs Note that the temperatures given are “actual” temperatures not oven settings.

Faraday Technology Ltd. Tel: + 44 (0)1782 661501 Croft Road Industrial Estate, Fax: + 44 (0)1782 630101 Newcastle, Staffordshire Email: sales@faradaytech.co.uk Fara366d Page 3 of 3 Sep-05(A)