DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
SPE-16-8-032/A/NW Page 1 of 7 SPECIFICATION Part No. : RECE.20279.001E.01 Product Name : IPEX MHF Receptacle Compatible with IPEX MHFII, Hirose U.FL Mating Height: 2.5mm MAX 2,500 pieces per reel Photo :
SPE-16-8-032/A/NW Page 2 of 7 1. Introduction The Taoglas RECE.20279.001E.01 is a 3 pad type wire-to-board MHF SMT Receptacle solution that is ultra small, lightweight and low profile (2.5mm MAX.) with an operational fre quency range of DC to 6 GHz. Taoglas RECE.20279.001E.01 is gold plated to have superior performance and allow easy mounting of the male RF connector. Packaged on tape and reel, this receptacle is designed to be placed with automatic “pick and place” equipment. The RECE.20279.001E.01 acts as a 50 Ohm transmission line to connect the micro-miniature RF connector to the printed circuit board. It is fully compatible with MHFII and Hirose U.FL connector. Applicable Technology RECE.20279.001E.01 receptacles commo nly integrate d into GSM module, GPS module, Wireless LAN modules.
SPE-16-8-032/A/NW Page 3 of 7 2. Specification Electrical Operation Frequency DC to 6 GHz VSWR
1.3 Max at DC~3 GHz
1.45 Max at 3~6 GHz
Contact Resistance 20m Ohm MAX. (signal) and 20m Ohm MAX. (Ground) Withstand Voltage AC 200V/minute Insulation Resistance 500 M Ohm MIN. /DC 100V Temperature -40 to +90°C Material Outer Contact Copper Alloy (Au plating) Centre Contact Copper Alloy (Au plating) Insulator LCP UL94V-0 Environmental Temperature -40 to +90°C RoHs Complaint Yes Halogen-Free Yes Yes Vibration (Mating connector) Frequency: 10Hz-100Hz Duration: 15mins Peak value of acceleration: 59m/s2 (6G) Direction, cycle: 3 axis, 5 cycles Shock (Mating connector) Peak Value of acceleration: 735m/s2 (75G) Duration: 11ms Waveform: Half sinusoidal Direction: 6 axis Cycles: 3 cycles for each direction Humidity Temperature: 40+/- 2°C Humidity: 90~95%RH Duration 96 hours Thermal Shock -40°C for 30mins to 5~35°C for 5 minutes to 90°C for 30mins to 5~35°C for 5 minutes Transition Time: 5 minutes Cycles: 5 High temperature life 90+/- 2°C for 96 hours H2S gas Temperature: 40+/-2°C Relative Humidity: 80+/-5%RH
SPE-16-8-032/A/NW Page 4 of 7 Gas H2S 3+/-1ppm Duration 96 hours Salt Water Spray Temperature: 35+/-2°C Salt Water Density: 5+/-1% (by weight) Duration: 48 Hours
SPE-16-8-032/A/NW Page 5 of 7 3. Technical Drawing
SPE-16-8-032/A/NW Page 6 of 7 4. Footprint
SPE-16-8-032/A/NW Page 7 of 7 5. Reflow Profile Recommended soldering temperature profile